Study of Reactive Ion Etching of the Si3 N 4 / GaAs Interface in  CF 4 Plasmas by X‐Ray Photoelectron Spectroscopy and X‐Ray Photoelectron Diffraction

1989 ◽  
Vol 136 (8) ◽  
pp. 2361-2367 ◽  
Author(s):  
P. Alnot ◽  
J. Olivier ◽  
F. Wyczisk ◽  
R. Joubard
Keyword(s):  
Photoelectron Spectroscopy ◽  
Reactive Ion Etching ◽  
Ion Etching ◽  
X Ray ◽  
Photoelectron Diffraction

Inductively Coupled Plasma Reactive Ion Etching of Ge-SiO2 and SiON Using C2F6 and NF3-Based Gas Mixtures

2007 ◽  
Vol 124-126 ◽  
pp. 503-506
Author(s):  
N.J. Kim ◽  
S.Y. Lee ◽  
G.K. Lee ◽  
J.H. Moon ◽  
Byung Teak Lee
Keyword(s):  
Photoelectron Spectroscopy ◽  
Inductively Coupled Plasma ◽  
Etch Rate ◽  
Reactive Ion Etching ◽  
Gas Mixtures ◽  
Smooth Surfaces ◽  
Ion Etching ◽  
X Ray ◽  
Inductively Coupled ◽  
Silica Glasses

Inductively coupled plasma reactive ion etching of Ge doped silica glasses and SiON was investigated, using C2F6- and NF3-based gas mixtures. Mesas with smooth surfaces and vertical sidewalls were obtained, with a maximum etch rate of about 310nm/min in the case of C2F6 RIE of Ge-SiO2 and 280 nm/min in the case of SiON. The NF3 plasma yielded slightly higher etch rate, although sloped sidewalls were obtained. Results of the X-ray photoelectron spectroscopy showed little contamination on the etched surfaces.

CHF3 and NH3 Additives for Reactive ion Etching of GaAs Using CCl2F2 and SICI4

1991 ◽  
Vol 240 ◽  
Author(s):  
Kuen-Sane Din ◽  
Gou-Chung Chi
Keyword(s):  
Photoelectron Spectroscopy ◽  
Etch Rate ◽  
Reactive Ion Etching ◽  
Experimental Results ◽  
Etching Process ◽  
Ion Etching ◽  
X Ray ◽  
Gaas Wafer ◽  
Self Bias

ABSTRACTTwo fundamental requirements for RIE are the formation of nearly volatile etch products and sufficiently high physical bombardment to remove all substances on the surface. In this study, the GaAs wafer was in-situ pretreated with NH3 or CHF3 plasma prior to actual etching process. The main etchants are CCl2F2 and SiCl4. By adding these additives to the main etch gases, the resulting etch performance was significantly affected. For instance, DC self-bias of CCl2F2 plasma is relatively low and can increase with such gas addition, thus the etching properties related to physical bombardment change too. CHF3 improve GaAs etch rate in CCl2F2through increasing concentration of reactive chlorine-containing species. While CHF3 enhance etch rate in SiCl4 plasma. The as etched samples were examined with X-ray photoelectron spectroscopy. Details of the experimental results will be described.

The Etching Reaction and Surface Reconstruction of Bismuth Zinc Niobate Thin Film in SF6/Ar Plasma

2013 ◽  
Vol 763 ◽  
pp. 28-32
Author(s):  
Shu Ya Wang ◽  
Yun Ying Fu ◽  
Li Ping Dai ◽  
Guo Jun Zhang
Keyword(s):  
Surface Reconstruction ◽  
Photoelectron Spectroscopy ◽  
Reactive Ion Etching ◽  
Pyrochlore Structure ◽  
Film Surface ◽  
Optimum Process ◽  
Ion Etching ◽  
X Ray ◽  
Bismuth Zinc Niobate ◽  
Ar Plasma

Reactive ion etching (RIE) of bismuth zinc niobate (BZN) thin films using an SF6/Ar plasma has been studied. An optimum process parameters was obtained according to the highest etch rate of 90nm/min. Under this etching condition, the crystal structural properties and surface morphology of the BZN film before and after etching were characterized using X-ray diffraction (XRD), the film showed a surface reconstruction after etching, a cubic pyrochlore structure orientation transition was observed from preferential (222) to (400), and ZnF2 phases were detected. The film surface was chemically analyzed by X-ray photoelectron spectroscopy (XPS) to investigate the reactive ion etching mechanism. A zinc-rich surface was formed because low-volatile ZnF2 residues were difficult to remove.

scholarly journals Dry Etching Performance and Gas-Phase Parameters of C6F12O + Ar Plasma in Comparison with CF4 + Ar

Materials ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1595
Author(s):  
Nomin Lim ◽  
Yeon Sik Choi ◽  
Alexander Efremov ◽  
Kwang-Ho Kwon
Keyword(s):  
Gas Phase ◽  
Photoelectron Spectroscopy ◽  
Reactive Ion Etching ◽  
Research Work ◽  
Optical Emission ◽  
Plasma Parameters ◽  
Ion Etching ◽  
Ar Plasma ◽  
Ar Gas ◽  
Etching Selectivity

This research work deals with the comparative study of C6F12O + Ar and CF4 + Ar gas chemistries in respect to Si and SiO2 reactive-ion etching processes in a low power regime. Despite uncertain applicability of C6F12O as the fluorine-containing etchant gas, it is interesting because of the liquid (at room temperature) nature and weaker environmental impact (lower global warming potential). The combination of several experimental techniques (double Langmuir probe, optical emission spectroscopy, X-ray photoelectron spectroscopy) allowed one (a) to compare performances of given gas systems in respect to the reactive-ion etching of Si and SiO2; and (b) to associate the features of corresponding etching kinetics with those for gas-phase plasma parameters. It was found that both gas systems exhibit (a) similar changes in ion energy flux and F atom flux with variations on input RF power and gas pressure; (b) quite close polymerization abilities; and (c) identical behaviors of Si and SiO2 etching rates, as determined by the neutral-flux-limited regime of ion-assisted chemical reaction. Principal features of C6F12O + Ar plasma are only lower absolute etching rates (mainly due to the lower density and flux of F atoms) as well as some limitations in SiO2/Si etching selectivity.

X-ray photoelectron spectroscopy characterization of barium titanate ceramics prepared by the citric route. Residual carbon study

1997 ◽  
Vol 12 (9) ◽  
pp. 2388-2392 ◽  
Author(s):  
C. Miot ◽  
E. Husson ◽  
C. Proust ◽  
R. Erre ◽  
J. P. Coutures
Keyword(s):  
Barium Titanate ◽  
Single Crystals ◽  
Photoelectron Spectroscopy ◽  
Residual Carbon ◽  
Ion Etching ◽  
Xps Spectra ◽  
X Ray ◽  
Titanate Ceramics

Powder and ceramics of barium titanate prepared by the citric process were studied by x-ray photoelectron spectroscopy (XPS). Spectra of C1s, O1s, Ti2p, Ba3d, and Ba4d levels are analyzed in powder and ceramics immediately after the sintering step and after several months of exposure in the air. Ar-ion etching allowed one to characterize the material intrinsic carbon. The results are discussed in comparison with works previously published on oxide single crystals.

Sign in / Sign up

Export Citation Format

Share Document