Design technology and optimization measures of high-speed digital circuit in computer

2021 ◽  
Author(s):  
Xianqing Yan ◽  
Jingzhou Zha
Keyword(s):  
High Speed ◽  
Digital Circuit ◽  
Design Technology

scholarly journals Performance Analysis of a Low Power High Speed Hybrid Full Adder Circuit and Full Subtractor Circuit

2021 ◽  
Vol 12 (3) ◽  
pp. 3037-3045
Author(s):  
M. Naga Gowtham Et.al
Keyword(s):  
High Speed ◽  
Supply Voltage ◽  
Average Power ◽  
Full Adder ◽  
Digital Circuit ◽  
Oxide Semiconductor ◽  
Transmission Gate ◽  
Average Power Consumption ◽  
Pass Transistor ◽  
Pass Transistor Logic

In this paper, a hybrid 1-bit adder and 1-bit Subtractor designs are implemented. The hybrid adder circuit is constructed using CMOS (complementary metal oxide semiconductor) logic along with pass transistor logic. The design can be extended 16 and 32 bits lately. The proposed full adder circuit is compared with the existing conventional adders in terms of power, delay and area in order to obtain a better circuit that serves the present day needs of people. The existing 1-bit hybrid adder uses EXNOR logic combined with the transmission gate logic. For a supply voltage of 1.8V the average power consumption (4.1563 µW) which is extremely low with moderately low delay (224 ps) resulting because of the deliberate incorporation of very weak CMOS inverters coupled with strong transmission gates. At 1.2V supply the power and delay were recorded to be 1.17664 µW and 91.3 ps. The design was implemented using 1-bit which can also be extended into a 32-bit design later. The designed implementation offers a better performance in terms of power and speed compared to the existing full adder design styles. The circuits were implemented in DSCH2 and Microwind tools respectively. The parameters such as power, delay, layout area and speed of the proposed circuit design is compared with pass transistor logic, adiabatic logic, transmission gate adder and so on. The circuit is also designed with a decrease in transistors in order to get the better results. Full Subtractor, a combinational digital circuit which performs 1-bit subtraction with borrow in is designed as a part of this project. The main aim behind this part of the project is to design a 1-bit full Subtractor using CMOS technology with reduced number of transistors and hence the efficiency in terms of area, power and speed have been calculated is designed using 8,10,15and 16 transistors. The parameters were calculated in each case and the results have been tabulated.

scholarly journals Performance Analysis of a Low Power High Speed Hybrid Full Adder Circuit and Full Subtractor Circuit

2021 ◽  
Vol 12 (5) ◽  
pp. 92-100
Author(s):  
M. Naga Gowtham, P.S Hari Krishna Reddy, K Jeevitha, K Hari Kishore, E Raghuveera, Shaik Razia
Keyword(s):  
High Speed ◽  
Supply Voltage ◽  
Average Power ◽  
Full Adder ◽  
Digital Circuit ◽  
Oxide Semiconductor ◽  
Transmission Gate ◽  
Average Power Consumption ◽  
Pass Transistor ◽  
Pass Transistor Logic

In this paper, a hybrid 1-bit adder and 1-bit Subtractor designs are implemented. The hybrid adder circuit is constructed using CMOS (complementary metal oxide semiconductor) logic along with pass transistor logic. The design can be extended 16 and 32 bits lately. The proposed full adder circuit is compared with the existing conventional adders in terms of power, delay and area in order to obtain a better circuit that serves the present day needs of people. The existing 1-bit hybrid adder uses EXNOR logic combined with the transmission gate logic. For a supply voltage of 1.8V the average power consumption (4.1563 µW) which is extremely low with moderately low delay (224 ps) resulting because of the deliberate incorporation of very weak CMOS inverters coupled with strong transmission gates. At 1.2V supply the power and delay were recorded to be 1.17664 µW and 91.3 ps. The design was implemented using 1-bit which can also be extended into a 32-bit design later. The designed implementation offers a better performance in terms of power and speed compared to the existing full adder design styles. The circuits were implemented in DSCH2 and Microwind tools respectively. The parameters such as power, delay, layout area and speed of the proposed circuit design is compared with pass transistor logic, adiabatic logic, transmission gate adder and so on. The circuit is also designed with a decrease in transistors in order to get the better results. Full Subtractor, a combinational digital circuit which performs 1-bit subtraction with borrow in is designed as a part of this project. The main aim behind this part of the project is to design a 1-bit full Subtractor using CMOS technology with reduced number of transistors and hence the efficiency in terms of area, power and speed have been calculated is designed using 8,10,15and 16 transistors. The parameters were calculated in each case and the results have been tabulated.

scholarly journals 14 Transistors CNTFET and CMOS Full Adder Cell for Modified GDI Technique

2019 ◽  
Vol 8 (12) ◽  
pp. 842-845
Keyword(s):  
Carbon Nanotube ◽  
High Speed ◽  
Full Adder ◽  
Cmos Technology ◽  
Digital Circuit ◽  
Basic Unit ◽  
Short Channel ◽  
Low Power Dissipation ◽  
The Difference ◽  
Cmos Implementation

Adder Is Basic Unit For Any Digital System, Dsp And Microprocessor. The Main Issue In Design High Speed Full Adder Cell With The Low Power Dissipation. As We Know Cmos Technology Used For Vlsi Designing Cmos Has Many Drawbacks As High Power Short Channel Effect Etc. Then Cntfet (Carbon Nanotube Field Effect Transistor) Has Been Developed Which Has Same Structure As Cmos. The Difference Between Structure Of Cmos And Cntfet Is Their Channel. In Cntfet Channel Is Replaced By Carbon Nanotube. In This Paper We Compare Full Adder Circuit Using Cntfet With Gdi Technique And Cmos Implementation Of Adder Which Gdi Technique. Gdi Technique Is Used For Speed And Power Optimization In Digital Circuit. This Can Also Reduce The Count Of Transistor Which Affects The Size Of Device.

HIGH SPEED DIGITAL CIRCUIT TECHNOLOGY

1995 ◽  
Vol 06 (01) ◽  
pp. 163-210 ◽  
Author(s):  
STEPHEN I. LONG
Keyword(s):  
Integrated Circuits ◽  
Low Power ◽  
Material Properties ◽  
High Speed ◽  
Digital Circuit ◽  
Bipolar Transistor ◽  
Clock Frequency ◽  
Digital Integrated Circuits ◽  
Heterojunction Devices ◽  
Circuit Technology

The performance of high speed digital integrated circuits, defined here as those requiring operation at high clock frequency, is generally more sensitive to material properties and process techniques than ICs used at lower frequencies. Obtaining high speed and low power concurrently is especially challenging. Circuit architectures must be selected for the device and application appropriately. This paper presents simple models for high speed digital IC performance and applies these to the FET and bipolar transistor. Heterojunction devices are compared with those using single or binary materials. Circuits for high speed SSI and low power VLSI applications are described, and their performance is surveyed.

Reversible Realization of 4-Bit Vedic Multiplier Circuit with Optimized Performance Parameters

2019 ◽  
Vol 17 (10) ◽  
pp. 826-831
Author(s):  
Vandana Shukla ◽  
O. P. Singh ◽  
G. R. Mishra ◽  
R. K. Tiwari
Keyword(s):  
Low Power ◽  
Power Loss ◽  
High Speed ◽  
Digital Circuit ◽  
Performance Parameters ◽  
Low Loss ◽  
Vital Part ◽  
Multiplication Process ◽  
Vedic Multiplier ◽  
Multiplier Circuit

Low power high speed calculating devices are foremost requirement of this era. Moreover, multiplication is considered as the most vital part of any calculating system. Multiplication process is generally considered as the speed limiting process as it requires more time as compared to other basic arithmetic calculations. So, here we focus on multiplication calculation using vedic method. Moreover, Reversible realization of any digital circuit improves the performance of the system by reducing the power loss from it. Here, the concept of vedic multiplication and Reversible approach are combined to propose a 4-bit multiplier circuit with optimized performance parameters. Proposed design is also analyzed and compared with existing designs. This approach may be employed to propose other low loss devices.

Sign in / Sign up

Export Citation Format

Share Document