Photo-initiated and thermal curing of epoxides by the use of photo-base generators bearing acyloxyimino groups

1995 ◽  
Vol 73 (11) ◽  
pp. 1924-1932 ◽  
Author(s):  
Ken-ichi Ito ◽  
Yoshitaka Shigeru ◽  
Yu-uichi Kawata ◽  
Katsuhiko Ito ◽  
Masahiro Tsunooka
Keyword(s):  
Glass Transition ◽  
Glycidyl Methacrylate ◽  
Epoxy Resins ◽  
Room Temperature ◽  
The Other ◽  
Quantum Yields ◽  
Thermal Curing ◽  
Very High ◽  
Acetophenone Oxime ◽  
Group Photo

The formation of amines by the photolysis of O-acyloximes derived from acetophenone oxime, benzophenone oxime, fluorenone oxime, and 2-acetonaphthone oxime and the curing of epoxides by the resulting amines were investigated. The quantum yields of their photolysis at 366 nm in polystyrene films depend on their structures, and those for bifunctional ones bearing phenyl or naphthyl moieties were found to be very high, at 0.88 and 0.76, respectively. The yields of the resulting amines in polymer matrices were higher than those in solution. The yields for O-acyloximes bearing a naphthyl moiety were ca. 90% and higher than for those bearing a phenyl moiety. Although the resulting amines were efficient photo-cross-linkers for poly(glycidyl methacrylate), they were not effective for curing of epoxy resins (oligomers). On the other hand, polymer amines with a glass transition temperature lower than room temperature, which were obtained by the photolysis of copolymers bearing acyloxyimino groups, were found to be effective photo-cross-linkers for the epoxy resins. Keywords: photo-base generator, acyloxyimino group, photo-initiated and thermal curing, poly(glycidyl methacrylate), epoxy resin.

Dislocation structures around SiO2 Particles in aged Cu-Cr-SiO2

1978 ◽  
Vol 36 (1) ◽  
pp. 594-595
Author(s):  
N.J. Long ◽  
M.H. Loretto ◽  
C.H. Lloyd
Keyword(s):  
Flow Stress ◽  
Single Crystals ◽  
Room Temperature ◽  
Thin Foil ◽  
Age Hardening ◽  
Dispersion Strengthening ◽  
Accurate Picture ◽  
The Matrix ◽  
Very High ◽  
Good Agreement

IntroductionThere have been several t.e.m. studies (1,2,3,4) of the dislocation arrangements in the matrix and around the particles in dispersion strengthened single crystals deformed in single slip. Good agreement has been obtained in general between the observed structures and the various theories for the flow stress and work hardening of this class of alloy. There has been though some difficulty in obtaining an accurate picture of these arrangements in the case when the obstacles are large (of the order of several 1000's Å). This is due to both the physical loss of dislocations from the thin foil in its preparation and to rearrangement of the structure on unloading and standing at room temperature under the influence of the very high localised stresses in the vicinity of the particles (2,3).This contribution presents part of a study of the Cu-Cr-SiO2 system where age hardening from the Cu-Cr and dispersion strengthening from Cu-Sio2 is combined.

Electron microscope studies of the plastic deformation of ternary alloys based on GaAs

1990 ◽  
Vol 48 (4) ◽  
pp. 1120-1120
Author(s):  
R. Haswell ◽  
U. Bangert ◽  
P. Charsley
Keyword(s):  
Plastic Deformation ◽  
Electron Microscope ◽  
Room Temperature ◽  
Stacking Faults ◽  
The Other ◽  
Ternary Alloys ◽  
Dislocation Mobility ◽  
Semiconducting Materials ◽  
Micro Indentation

A knowledge of the behaviour of dislocations in semiconducting materials is essential to the understanding of devices which use them . This work is concerned with dislocations in alloys related to the semiconductor GaAs . Previous work on GaAs has shown that microtwinning occurs on one of the <110> rosette arms after indentation in preference to the other . We have shown that the effect of replacing some of the Ga atoms by Al results in microtwinning in both of the rosette arms.In the work to be reported dislocations in specimens of different compositions of Gax Al(1-x) As and Gax In(1-x) As have been studied by using micro indentation on a (001) face at room temperature . A range of electron microscope techniques have been used to investigate the type of dislocations and stacking faults/microtwins in the rosette arms , which are parallel to the [110] and [10] , as a function of composition for both alloys . Under certain conditions microtwinning occurs in both directions . This will be discussed in terms of the dislocation mobility.

Thrombotic Thrombocytopenic Purpura: Mechanism for Effectiveness of Plasmapheresis

1979 ◽  
Author(s):  
J. G. Kelton ◽  
P. B. Neame ◽  
I. Walker ◽  
A. G. Turpie ◽  
J. McBride ◽  
...  
Keyword(s):  
Platelet Count ◽  
Thrombotic Thrombocytopenic Purpura ◽  
The Other ◽  
Unknown Etiology ◽  
Normal Range ◽  
Antiplatelet Antibody ◽  
Thrombocytopenic Purpura ◽  
Serious Illness ◽  
Normal Platelet ◽  
Very High

Thrombotic thrombocytopenic purpura (TTP) is a rare but serious illness of unknown etiology. Treatment by plasmapheresis has been reported to be effective but the mechanism for benefit is unknown. We have investigated the effect of plasmapheresis in 2 patients with TTP by quantitating platelet associated IgG (PAIgG) levels prior to and following plasmapheresis. Both patients had very high levels of PAIgG at presentation (90 and A8 fg IgG/platelet respectively, normal 0-5). in both, the PAIgG levels progressively fell to within the normal range and the platelet count rose following plasmapheresis. One patient remained in remission with normal platelet counts and PAIgG levels. The other relapsed after plasmapheresis and the PAIgG level rose prior to the fall in platelet count. Plasmapheresis was repeated and resulted in normalization of both the platelet count and PAIgG level. It is suggested that plasmapheresis removes antiplatelet antibody or immune complexes which may be of etiological importance in this illness.

HAYNES STELLITE ALLOY No. 98M2

Alloy Digest ◽  
1960 ◽  
Vol 9 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Physical Properties ◽  
Room Temperature ◽  
Base Alloy ◽  
Heat Treating ◽  
The Other ◽  
Stellite Alloy ◽  
Cobalt Base Alloy ◽  
Cobalt Base

Abstract HAYNES STELLITE 98M2 Alloy is a cobalt-base alloy having higher compressive strength and higher hardness than all the other cobalt-base alloys at room temperature and in the red heat range. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on heat treating, machining, and joining. Filing Code: Co-22. Producer or source: Haynes Stellite Company.

Growth Characteristics of Activated Sludges Acclimated to para-Nitrophenol in Batch and Continuous Modes

1994 ◽  
Vol 29 (7) ◽  
pp. 327-333
Author(s):  
Y. Matsui ◽  
F. Yamaguchi ◽  
Y. Suwa ◽  
Y. Urushigawa
Keyword(s):  
Growth Characteristics ◽  
The Other ◽  
Operational Mode ◽  
Continuous Mode ◽  
Relative Resistance ◽  
Batch Mode ◽  
The Given ◽  
Operational Modes ◽  
Very High ◽  
Sensitive Group

Activated sludges were acclimated to p-nitrophenol (PNP) in two operational modes, a batch and a continuous. The operational mode of the PNP acclimation of activated sludges strongly affected the physiological characteristics of predominant microorganisms responsible for PNP degradation. Predominant PNP degraders in the sludge in batch mode (Sludge B) had lower PNP affinity and were relatively insensitive to PNP concentration. Those of the sludge in continuous mode (Sludge C), on the other hand, had very high PNP affinity and were sensitive to PNP. MPN enumeration of PNP degraders in sludge B and C using media with different PNP concentrations (0.05, 0.2,0.5 and 2.0 mM) supported the above results. Medium with 0.2 mM of PNP did not recover PNP degraders in sludge C well, while it recovered PNP degraders in sludge B as well as the medium with 0.05 mM did. When switching from one operational mode to the other, the predominant population in sludge B shifted to the sensitive group, but that of sludge C did not shift at the given loading of PNP, showing relative resistance to inhibitive concentration.

Regioselectivity of nucleophilic aromatic photosubstitution in the biphenyl series. Photohydrolysis of some dimethoxynitrobiphenyls

1987 ◽  
Vol 52 (10) ◽  
pp. 2482-2491 ◽  
Author(s):  
Ján Urban ◽  
Petr Kuzmič ◽  
David Šaman ◽  
Milan Souček
Keyword(s):  
Nitro Group ◽  
Steric Hindrance ◽  
The Other ◽  
Quantum Yields ◽  
Hydroxide Anion ◽  
Tert Butanol ◽  
Nitro Derivatives

Anaerobic photolysis of dimethoxynitrobiphenyls IIIa-VIa in aqueous alkaline tert-butanol gave products of nucleophilic photosubstitution of methoxyl by hydroxide anion, while the dimethoxybiphenyls Ia and IIa were found unreactive. Regioselectivity of the reaction was examined in view of a possible “extended meta activation” by the nitro group. The most reactive substrate IIIa gives both C-3 and C-4 substitution products with an unsubstantial preference for the latter, which opposes the “extended meta selectivity” rule. All of the other compounds obey the rule, and 3,4-dimethoxy-3'-nitrobiphenyl (IVa) even displayed absolute selectivity by yielding C-3 substituted compound as the only product. 2,5-Dimethoxy substituted compounds underwent photosubstitution which much lower quantum yields than their 3,4-substituted counterparts, most probably due to some steric hindrance of conjugation. Similarly, 3-nitro-substituted biphenyls exhibited much lower overall reactivity than 4-nitro derivatives.

The Reactivity of Different Active Forms of Sodium Carbonate with Respect to Sulfur Dioxide

1992 ◽  
Vol 57 (11) ◽  
pp. 2302-2308
Author(s):  
Karel Mocek ◽  
Erich Lippert ◽  
Emerich Erdös
Keyword(s):  
Thermal Decomposition ◽  
Liquid Phase ◽  
Sulfur Dioxide ◽  
Specific Surface ◽  
Surface Area ◽  
Sodium Carbonate ◽  
Room Temperature ◽  
Active Form ◽  
The Other ◽  
Kinetics Of

The kinetics of the reaction of solid sodium carbonate with sulfur dioxide depends on the microstructure of the solid, which in turn is affected by the way and conditions of its preparation. The active form, analogous to that obtained by thermal decomposition of NaHCO3, emerges from the dehydration of Na2CO3 . 10 H2O in a vacuum or its weathering in air at room temperature. The two active forms are porous and have approximately the same specific surface area. Partial hydration of the active Na2CO3 in air at room temperature followed by thermal dehydration does not bring about a significant decrease in reactivity. On the other hand, if the preparation of anhydrous Na2CO3 involves, partly or completely, the liquid phase, the reactivity of the product is substantially lower.

Islamic hedging for pilgrimage funds: case of Indonesia

2019 ◽  
Vol 11 (3) ◽  
pp. 328-341
Author(s):  
Rifki Ismal ◽  
Nurul Izzati Septiana
Keyword(s):  
Exchange Rate ◽  
The Other ◽  
Exchange Rate Risk ◽  
Content Type ◽  
Other Hand ◽  
Rate Risk ◽  
Risk Identify ◽  
Hajj Season ◽  
The Right ◽  
Very High

Purpose The demand for Saudi Arabian real (SAR) is very high in the pilgrimage (hajj) season while the authority, unfortunately, does not hedge the hajj funds. As such, the hajj funds are potentially exposed to exchange rate risk, which can impact the value of hajj funds and generate extra cost to the pilgrims. The purpose of this paper is to conduct simulations of Islamic hedging for pilgrimage funds to: mitigate and minimize exchange rate risk, identify and recommend the ideal time, amount and tenors of Islamic hedging for hajj funds, estimate cost saving by pursuing Islamic hedging and propose technical and general recommendations for the authority. Design/methodology/approach Forward transaction mechanism is adopted to compute Islamic forward between SAR and Rupiah (Indonesian currency) or IDR. Findings – based on simulations, the paper finds that: the longer the Islamic hedging tenors, the better is the result of Islamic hedging, the decreasing of IDR/USD is the right time to hedge the hajj funds and, on the other hand, the IDR/SAR appreciation is not the right time to hedge the hajj funds. Findings Based on simulations, the paper finds that: the longer the Islamic hedging tenors, the better is the result of Islamic hedging, the decreasing of IDR/USD is the right time to hedge the hajj funds and, on the other hand, the IDR/SAR appreciation is not the right time to hedge the hajj funds. Research limitations/implications The research suggests the authority to (and not to) hedge the hajj fund, depending on economic conditions and market indicators. Even though the assessment is for the Indonesian case, other countries maintaining hajj funds might also learn from this paper. Originality/value To the best of author’s knowledge, this is the first paper in Indonesia that attempts to simulate the optimal hedging of hajj funds.

scholarly journals Investigation of the functional network modifier loading on the stoichiometric ratio of epoxy resins and their dielectric properties

2021 ◽  
Author(s):  
Istebreq A. Saeedi ◽  
Sunny Chaudhary ◽  
Thomas Andritsch ◽  
Alun S. Vaughan
Keyword(s):  
Glass Transition ◽  
Dielectric Properties ◽  
Electrical Properties ◽  
Epoxy Resins ◽  
Functional Network ◽  
Cross Linking ◽  
Network Modifier ◽  
Epoxy Resin System ◽  
The Cross ◽  
The Impact

AbstractReactive molecular additives have often been employed to tailor the mechanical properties of epoxy resins. In addition, several studies have reported improved electrical properties in such systems, where the network architecture and included function groups have been modified through the use of so-called functional network modifier (FNM) molecules. The study reported here set out to investigate the effect of a glycidyl polyhedral oligomeric silsesquioxane (GPOSS) FNM on the cross-linking reactions, glass transition, breakdown strength and dielectric properties of an amine-cured epoxy resin system. Since many previous studies have considered POSS to act as an inorganic filler, a key aim was to consider the impact of GPOSS addition on the stoichiometry of curing. Fourier transform infrared spectroscopy revealed significant changes in the cross-linking reactions that occur if appropriate stoichiometric compensation is not made for the additional epoxide groups present on the GPOSS. These changes, in concert with the direct effect of the GPOSS itself, influence the glass transition temperature, dielectric breakdown behaviour and dielectric response of the system. Specifically, the work shows that the inclusion of GPOSS can result in beneficial changes in electrical properties, but that these gains are easily lost if consequential changes in the matrix polymer are not appropriately counteracted. Nevertheless, if the system is appropriately optimized, materials with pronounced improvements in technologically important characteristics can be designed.

Sign in / Sign up

Export Citation Format

Share Document