Non-stoichiometric chloride salts of dioxotetrakis(imidazole)rhenium(V) cations

1993 ◽  
Vol 71 (12) ◽  
pp. 2070-2078 ◽  
Author(s):  
Anne-Marie Lebuis ◽  
Jim M.C. Young ◽  
André L. Beauchamp
Keyword(s):  
Infrared Spectra ◽  
Unit Cell ◽  
X Ray Diffraction ◽  
Octahedral Structure ◽  
X Ray ◽  
Extra Peak ◽  
Protonated Species ◽  
Chloride Salts ◽  
Additional Charge ◽  
C Nmr

Orange [ReO2L4]Cl salts were prepared with L = imidazole and 2-methylimidazole. The presence of a strong Re = O stretching band in the infrared spectra near 785 cm−1 is consistent with a trans-dioxo octahedral structure. With 1,2-dimethylimidazole, red-violet solids were obtained, which were studied by X-ray diffraction. Form I (from methanol): cubic, [Formula: see text]a = 25.205 Å, R = 0.032, 986 observed reflections; form II (from ethanol-dichloromethane): cubic, [Formula: see text]a = 25.520 Å, R = 0.056, 766 observed reflections. Both materials are non-stoichiometric, containing trans-[ReO2L4]+ and protonated trans-[ReO(OH)L4]2+ in an approximate ratio of 3:1 for 1 and 2:1 for II. In both cases, the unit cell contains 1 "normal" Cl− ion and 2/3 H2O per complex. In form I, the additional charge of [ReO(OH)L4]2+ is balanced by an extra Cl− ion partly occupying the unit cell origin, where it is replaced by disordered methanol the rest of the time. In form II, ReO4− and CH2Cl2 play the corresponding roles. In the infrared spectra, besides the characteristic band for the dioxo species, both forms show an extra peak at ~932 cm−1 originating from the protonated species, whereas form II shows an additional band at 907 cm−1 for uncoordinated ReO4−. The 1H and 13C NMR spectra of both forms in D2O are identical to those of the pure [ReO2L4]+ salt, indicating that the protonated species is strongly acidic.

Synthesis and X-ray diffraction data of 5-acryloyloxy-trans-2-(4-methoxyphenyl)-3-methyl-2,3-dihydrobenzo[b]furan

2012 ◽  
Vol 27 (3) ◽  
pp. 211-214
Author(s):  
Mónica V. Sandoval ◽  
J. A. Henao ◽  
Arnold R. Romero Bohórquez ◽  
Vladimir V. Kouznetsov
Keyword(s):  
Cycloaddition Reaction ◽  
Unit Cell ◽  
Gas Chromatography Mass Spectrometry ◽  
X Ray Diffraction ◽  
Monoclinic System ◽  
Anhydrous Dichloromethane ◽  
X Ray ◽  
Cell Parameters ◽  
Ft Ir ◽  
C Nmr

The compound O-acryloylated 2,3-dihydrobenzo[b]furan-5-ol (2) described in the title (chemical formula C19H18O4) was synthesized through the acryloylation reaction in anhydrous dichloromethane from the corresponding trans-2-(4-methoxyphenyl)-3-methyl-2,3-dihydrobenzo[b]furan-5-ol derivative (1), an adduct easily obtained using the Lewis acid-promoted formal [3 + 2] cycloaddition reaction. Molecular characterization was performed by Fourier Transform-Infrared (FT-IR), Gas Chromatography-Mass Spectrometry (GC-MS), 1H and 13C NMR and crystallographic characterization was carried out by X-ray diffraction (XRD) of polycrystalline samples. The title compound crystallized in a monoclinic system and unit-cell parameters are reported [a = 8.067(2) Å, b = 8.803(2) Å, c = 22.405(5) Å, β = 91.62(3)°, unit-cell volume V = 1590.7(6) Å3 and Z = 4]. All measured lines were indexed with the P21/c (No. 14) space group.

Characterization of the ionic clathrate hydrate of tetra-n-butylammonium acrylate

2015 ◽  
Vol 93 (9) ◽  
pp. 954-959 ◽  
Author(s):  
Sanehiro Muromachi ◽  
Masato Kida ◽  
Satoshi Takeya ◽  
Yoshitaka Yamamoto ◽  
Ryo Ohmura
Keyword(s):  
Nmr Spectra ◽  
Clathrate Hydrate ◽  
Unit Cell ◽  
The Other ◽  
X Ray Diffraction ◽  
X Ray ◽  
Lattice Water ◽  
C Nmr ◽  
The Ideal

The ionic clathrate hydrate of tetra-n-butylammonium (TBA) acrylate was characterized using single-crystal X-ray diffraction, elemental analysis, and nuclear magnetic resonance (NMR) spectroscopy. The crystal structure of TBA acrylate was Jeffrey’s type III and tetragonal P42/n, with a 33.076(7) × 33.076(7) × 12.170(2) Å3 unit cell. The volume of the unit cell was 13315(5) Å3, which is almost twice that of the ideal structure. The TBA cation was disordered and located in two types of fused cages. Although the acrylate anion was located in a pentagonal dodecahedral cage neighboring the TBA cation, there is a residual acrylate anion that could be around the other TBA cation in the unit cell. Solid-state 13C NMR spectra showed that the TBA cation was clearly disordered at 173 K, but not at 239 K. NMR peaks from the acrylate anion were not observed at either temperature. This is probably because of the strong restriction on the acrylate anion by hydrogen bonding with the lattice water. Some of the characteristics of the anion and cation of the ionic guest incorporated in the hydrate structure have yet to be defined. Further research is needed to clarify complexation of the ionic clathrate hydrate and the ionic guest, and the resulting structure.

X-ray Structure Refinement and Vibrational Spectroscopy of Ca8Gd2 (PO4)6 O2

2013 ◽  
Vol 12 (10) ◽  
pp. 719-726
Author(s):  
R. Ayadi ◽  
Mohamed Boujelbene ◽  
T. Mhiri
Keyword(s):  
Solid State ◽  
General Formula ◽  
Vibrational Spectroscopy ◽  
Powder Diffraction ◽  
Infrared Spectra ◽  
Solid State Reaction ◽  
Structure Refinement ◽  
Unit Cell ◽  
Cell Group ◽  
X Ray

The present paper is interested in the study of compounds from the apatite family with the general formula Ca10 (PO4)6A2. It particularly brings to light the exploitation of the distinctive stereochemistries of two Ca positions in apatite. In fact, Gd-Bearing oxyapatiteCa8 Gd2 (PO4)6O2 has been synthesized by solid state reaction and characterized by X-ray powder diffraction. The site occupancies of substituents is0.3333 in Gd and 0.3333 for Ca in the Ca(1) position and 0. 5 for Gd in the Ca (2) position.  Besides, the observed frequencies in the Raman and infrared spectra were explained and discussed on the basis of unit-cell group analyses.

Fabrication and study the effect of the laser on the properties of the compound Tl2-xHgxBa2-ySryCa2Cu3O10+δ superconductor

2018 ◽  
pp. 168
Author(s):  
A. Kareem Dahash Ali ◽  
Nihad Ali Shafeek
Keyword(s):  
Transition Temperature ◽  
Solid State ◽  
Hydrostatic Pressure ◽  
Electrical Properties ◽  
Co2 Laser ◽  
Temperature Shift ◽  
Unit Cell ◽  
X Ray Diffraction ◽  
X Ray ◽  
Structural And Electrical Properties

This study included the fabrication of    compound (Tl2-xHgxBa2-ySryCa2Cu3O10+δ) in a manner solid state and under hydrostatic pressure ( 8 ton/cm2) and temperature annealing(850°C), and determine the effect of the laser on the structural and electrical properties elements in the compound, and various concentrations of x where (x= 0.1,0.2,0.3 ). Observed by testing the XRD The best ratio of compensation for x is 0.2 as the value of a = b = 5.3899 (A °), c = 36.21 (A °) show that the installation of four-wheel-based type and that the best temperature shift is TC= 142 K  .When you shine a CO2 laser on the models in order to recognize the effect of the laser on these models showed the study of X-ray diffraction of these samples when preparing models with different concentrations of the values ​​of x, the best ratio of compensation is 0.2 which showed an increase in the values ​​of the dimensions of the unit cell a=b = 5.3929 (A °), c = 36.238 (A°). And the best transition temperature after shedding laser is TC=144 K. 

Infrared spectroscopic study of the YPO4-YCrO4 system

1985 ◽  
Vol 50 (10) ◽  
pp. 2139-2145
Author(s):  
Alexander Muck ◽  
Eva Šantavá ◽  
Bohumil Hájek
Keyword(s):  
Spectroscopic Study ◽  
Infrared Spectra ◽  
Point Of View ◽  
Mixed Crystals ◽  
Crystal Symmetry ◽  
Infrared Spectroscopic Study ◽  
X Ray Diffraction ◽  
X Ray ◽  
Infrared Spectroscopic ◽  
Diffraction Patterns

The infrared spectra and powder X-ray diffraction patterns of polycrystalline YPO4-YCrO4 samples are studied from the point of view of their crystal symmetry. Mixed crystals of the D4h19 symmetry are formed over the region of 0-30 mol.% YPO4 in YCrO4. The Td → D2d → D2 or C2v(GS eff) correlation is appropriate for both PO43- and CrO43- anions.

An unusual reaction of a bridged triterpenoid α-diketone with acetic anhydride

1991 ◽  
Vol 56 (12) ◽  
pp. 2917-2935 ◽  
Author(s):  
Eva Klinotová ◽  
Václav Křeček ◽  
Jiří Klinot ◽  
Miloš Buděšínský ◽  
Jaroslav Podlaha ◽  
...  
Keyword(s):  
Acetic Acid ◽  
Nmr Spectroscopy ◽  
Acetic Anhydride ◽  
Spectral Methods ◽  
X Ray Diffraction ◽  
X Ray ◽  
Mild Conditions ◽  
Condensation Products ◽  
Unsaturated Lactones ◽  
C Nmr

3β-Acetoxy-21,22-dioxo-18α,19βH-ursan-28,20β-olide (IIIa) reacts with acetic anhydride in pyridine under very mild conditions affording β-lactone IVa and γ-lactones Va and VIIa as condensation products. On reaction with pyridine, lactones Va and VIIa undergo elimination of acetic acid to give unsaturated lactones VIIIa and IXa, respectively. Similarly, the condensation of 20β,28-epoxy-21,22-dioxo-18α,19βH-ursan-3β-yl acetate (IIIb) with acetic anhydride leads to β-lactone IVb and γ-lactone Vb; the latter on heating with pyridine affords unsaturated lactone VIIIb and 21-methylene-22-ketone Xb. The structure of the obtained compounds was derived using spectral methods, particularly 1H and 13C NMR spectroscopy; structure of lactone IVa was confirmed by X-ray diffraction.

scholarly journals X-ray Diffraction Analysis and Williamson-Hall Method in USDM Model for Estimating More Accurate Values of Stress-Strain of Unit Cell and Super Cells (2 × 2 × 2) of Hydroxyapatite, Confirmed by Ultrasonic Pulse-Echo Test

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2949
Author(s):  
Marzieh Rabiei ◽  
Arvydas Palevicius ◽  
Amir Dashti ◽  
Sohrab Nasiri ◽  
Ahmad Monshi ◽  
...  
Keyword(s):  
Young’S Modulus ◽  
Young's Modulus ◽  
Ultrasonic Pulse ◽  
High Accuracy ◽  
Unit Cell ◽  
Deformation Model ◽  
X Ray Diffraction ◽  
Uniform Deformation ◽  
X Ray ◽  
Pulse Echo

Taking into account X-ray diffraction, one of the well-known methods for calculating the stress-strain of crystals is Williamson-Hall (W–H). The W-H method has three models, namely (1) Uniform deformation model (UDM); (2) Uniform stress deformation model (USDM); and (3) Uniform deformation energy density model (UDEDM). The USDM and UDEDM models are directly related to the modulus of elasticity (E). Young’s modulus is a key parameter in engineering design and materials development. Young’s modulus is considered in USDM and UDEDM models, but in all previous studies, researchers used the average values of Young’s modulus or they calculated Young’s modulus only for a sharp peak of an XRD pattern or they extracted Young’s modulus from the literature. Therefore, these values are not representative of all peaks derived from X-ray diffraction; as a result, these values are not estimated with high accuracy. Nevertheless, in the current study, the W-H method is used considering the all diffracted planes of the unit cell and super cells (2 × 2 × 2) of Hydroxyapatite (HA), and a new method with the high accuracy of the W-H method in the USDM model is presented to calculate stress (σ) and strain (ε). The accounting for the planar density of atoms is the novelty of this work. Furthermore, the ultrasonic pulse-echo test is performed for the validation of the novelty assumptions.

scholarly journals Metal(II) Coordination Polymers from Tetracarboxylate Linkers: Synthesis, Structures, and Catalytic Cyanosilylation of Benzaldehydes

Catalysts ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 204
Author(s):  
Yu Li ◽  
Chumin Liang ◽  
Xunzhong Zou ◽  
Jinzhong Gu ◽  
Marina V. Kirillova ◽  
...  
Keyword(s):  
Coordination Polymers ◽  
Polycarboxylic Acid ◽  
X Ray Diffraction ◽  
X Ray ◽  
Trimethylsilyl Cyanide ◽  
Effect Of Solvent ◽  
Highly Active ◽  
Solvent Type ◽  
Metal Organic ◽  
Chloride Salts

Three 2D coordination polymers, [Cu2(µ4-dpa)(bipy)2(H2O)]n∙6nH2O (1), [Mn2(µ6-dpa)(bipy)2]n (2), and [Zn2(µ4-dpa)(bipy)2(H2O)2]n·2nH2O (3), were prepared by a hydrothermal method using metal(II) chloride salts, 3-(2′,4′-dicarboxylphenoxy)phthalic acid (H4dpa) as a linker, as well as 2,2′-bipyridine (bipy) as a crystallization mediator. Compounds 1–3 were obtained as crystalline solids and fully characterized. The structures of 1–3 were established by single-crystal X-ray diffraction, revealing 2D metal-organic networks of sql, 3,6L66, and hcb topological types. Thermal stability and catalytic behavior of 1–3 were also studied. In particular, zinc(II) coordination polymer 3 functions as a highly active and recoverable heterogeneous catalyst in the mild cyanosilylation of benzaldehydes with trimethylsilyl cyanide to give cyanohydrin derivatives. The influence of various parameters was investigated, including a time of reaction, a loading of catalyst and its recycling, an effect of solvent type, and a substrate scope. As a result, up to 93% product yields were attained in a catalyst recoverable and reusable system when exploring 4-nitrobenzaldehyde as a model substrate. This study contributes to widening the types of multifunctional polycarboxylic acid linkers for the design of novel coordination polymers with notable applications in heterogeneous catalysis.

Darstellung, 11B-, 13C-, 29Si-NMR- und Schwingungsspektren von Trimethylsilylmethyl-hexahydro-closo-hexaborat, [B6H6(CH2Si(CH3)3)]- sowie Kristallstruktur von [P(C6H5)4][B6H6(CH2Si(CH3)3)] / Preparation, 11B, 13C, 29Si NMR and Vibrational Spectra of Trimethylsilylmethyl-hexahydro-clo-hexaborate, [B6H6(CH2Si(CH 3)3)]-and the Crystal Structure of [P(C6H5)4] [B6H6(CH2Si(CH3)3)]

1995 ◽  
Vol 50 (7) ◽  
pp. 1025-1029 ◽  
Author(s):  
J. Baurmeister ◽  
A. Franken ◽  
W. Preetz
Keyword(s):  
Crystal Structure ◽  
Monoclinic Space Group ◽  
29Si Nmr ◽  
X Ray Diffraction ◽  
Nmr Spectrum ◽  
X Ray ◽  
Quadrupole Coupling ◽  
Stretching Vibration ◽  
Ir And Raman ◽  
C Nmr

By reaction of [N(C4H9 )4]2 [B6H6] with iodomethyl-trimethylsilane in acetonitrile a solution with trimethylsilylm ethyl-closo-hexaborate(1-)anions, [B6H6 (CH2Si(CH3)3)]-, is formed. The crystal structure of [P(C6H5 )4][B6H6(CH2Si(CH3)3)] has been determined by single crystal X-ray diffraction analysis; monoclinic, space group P21/n with a = 16.140(2), b = 11.646(8), c = 16.731(3) Å, β 109.664(11)°. The 11B NMR spectrum reveals features of a mono hetero substituted octahedral B6 cage. The 13C NMR spectrum exhibits a quartet at +0.18 ppm with 1J(C,H) = 118 Hz for the three methyl groups and a weak multiplet at -0.65 ppm for the methylene bridge due to quadrupole coupling with the boron atoms. In the 29Si NMR spectrum a decet at +2.25 ppm with 2J(C,H ) = 6.9 Hz is observed. The B -C stretching vibration is observed at 1155 cm-1 in the IR and Raman spectrum.

scholarly journals Study of Structural, Magnetic, and Mossbauer Properties of Dy2Fe16Ga1−xNbx (0.0 ≤ x ≤ 1.0) Prepared via Arc Melting Process

2021 ◽  
Vol 7 (3) ◽  
pp. 42
Author(s):  
Jiba N. Dahal ◽  
Kalangala Sikkanther Syed Ali ◽  
Sanjay R. Mishra
Keyword(s):  
Isomer Shift ◽  
Cell Volume ◽  
Intermetallic Compounds ◽  
Unit Cell Volume ◽  
Rietveld Analysis ◽  
Unit Cell ◽  
X Ray Diffraction ◽  
X Ray ◽  
Arc Melting ◽  
Nb Content

Intermetallic compounds of Dy2Fe16Ga1−xNbx (x = 0.0 to 1.00) were synthesized by arc melting. Samples were investigated for structural, magnetic, and hyperfine properties using X-ray diffraction, vibration sample magnetometer, and Mossbauer spectrometer, respectively. The Rietveld analysis of room temperature X-ray diffraction data shows that all the samples were crystallized in Th2Fe17 structure. The unit cell volume of alloys increased linearly with an increase in Nb content. The maximum Curie temperature Tc ~523 K for x = 0.6 sample is higher than Tc = 153 K of Dy2Fe17. The saturation magnetization decreased linearly with increasing Nb content from 61.57 emu/g for x = 0.0 to 42.46 emu/g for x = 1.0. The Mössbauer spectra and Rietveld analysis showed a small amount of DyFe3 and NbFe2 secondary phases at x = 1.0. The hyperfine field of Dy2Fe16Ga1−xNbx decreased while the isomer shift values increased with the Nb content. The observed increase in isomer shift may have resulted from the decrease in s electron density due to the unit cell volume expansion. The substantial increase in Tc of thus prepared intermetallic compounds is expected to have implications in magnets used for high-temperature applications.

Sign in / Sign up

Export Citation Format

Share Document