Effect of functional group conformation on the infrared spectra of some gem difunctional phenylethylene derivatives

1969 ◽  
Vol 47 (17) ◽  
pp. 3147-3152 ◽  
Author(s):  
D. J. Currie ◽  
C. E. Lough ◽  
F. K. McClusky ◽  
H. L. Holmes

Except for the benzalmalononitriles, two functional group stretching vibrations occur in the infrared (i.r.) spectra of the β,β-difunctional-styrenes with similar functional groups. For geometrically homogeneous compounds with dissimilar functional groups only one absorption band occurs for each functional group. The two bands for similar functional groups have been ascribed to S-cis- and S-trans-conformations of the carbonyl groups with respect to the ethylene and variation in the frequencies of each of these oriented carbonyls to rotation of the functional group or groups out of the plane of the ethylene by steric factors.Frequencies for ethylenic C—H out of plane deformation bands for β-monofunctional styrenes accorded with those already assigned to this vibration. A similar assignment could not be made for the difunctional analogues.

1964 ◽  
Vol 42 (1) ◽  
pp. 43-49 ◽  
Author(s):  
C. N. R. Rao ◽  
R. Venkataraghavan

Infrared spectra of 5-membered N- and N,S-heterocyclic derivatives such as triazoles, tetrazoles, thiazoles, thiadiazoles, thiatriazoles, and dithiazoles have been examined and empirical assignments have been made. The spectra of the two dithiazolidine derivatives, isoperthiocyanic acid and oxidation product of dithiobiuret, have been studied in detail. Assignments for benzthiazole derivatives are reported. The CH out-of-plane deformation bands of benzene rings fused to five-membered heterocyclic rings have been found to be in the region 760–740 cm−1, characteristic of four adjacent benzenoid hydrogen atoms.


2010 ◽  
Vol 64 (3) ◽  
Author(s):  
Gregor Ondrejovič ◽  
Adela Kotočová ◽  
Marian Koman ◽  
Peter Segľa

AbstractNew 4-cyanopyridine halide and mixed-halide Cu4OBrnCl(6−n)(4-CNpy)4 complexes (4-CNpy = 4-cyanopyridine, n = 0–6) were synthesised, characterised, and studied by infrared spectra, electronic spectra, and cyclic voltammetry. Infrared spectra revealed donor-acceptor vibrational couplings of the Cu4O, Cu-Cl, and Cu-N stretching vibrations with the in-plane and out-of-plane pyridine ring vibrations. The infrared spectra, electronic spectra, and half-wave potentials correspond to a weak donor and a strong acceptor behaviour of the 4-cyanopyridine ligands and to π-back bonding, Cu(II)→pyridine rings. The results were compared with the related pyridine and 4-substituted pyridine complexes.


1967 ◽  
Vol 45 (23) ◽  
pp. 2899-2902 ◽  
Author(s):  
Denys Cook ◽  
Zephyr R. Regnier

From the infrared spectra of theobromine salts it is concluded that the salts are probably arranged in hydrogen-bonded centrosymmetric pairs involving [Formula: see text] interactions. [Formula: see text] anion− hydrogen bonds are formed by protonation of the free nitrogen atom (N9) in the imidazole ring. Infrared absorption bands arising from the former hydrogen bond constantly appear near 3 000 cm−1, whereas those from the latter shift from 2 580 to 3 300 cm−1, depending on the anion. In-plane NH and N+H deformation modes give bands near 1 485 and 1 160 cm−1, respectively. Out-of-plane NH modes have been located, but precise assignments are not possible.The assignments for some other bands which show deuteration shifts are detailed, and the carbonyl stretching vibrations which increase in frequency on protonation of the free base are identified.


1975 ◽  
Vol 28 (2) ◽  
pp. 335 ◽  
Author(s):  
AJ Michell

Spectra in the OH stretching and out-of-plane bending regions of four methyl α-glycopyranosides of known crystal structure have been obtained at ambient and sub-ambient temperatures. Partial deuteration has been used to uncouple the stretching vibrations and assist in assignments of the out-of-plane bending vibrations.


1975 ◽  
Vol 29 (1) ◽  
pp. 24-28 ◽  
Author(s):  
B. Katlafsky ◽  
M. W. Dietrich

On-line infrared spectra obtained with the Norcon RS-1 gas chromatographic identifier are of sufficient quality for qualitative identification of functional groups, chemical classes, or chemical entities. Identification limits for chemical entities vary between 20 and 200 µg, polar compounds having higher sensitivities. Functional group identifications can be made with correspondingly smaller samples. A 5-fold increase in sensitivity was demonstrated using signal-averaging techniques.


1965 ◽  
Vol 43 (4) ◽  
pp. 749-757 ◽  
Author(s):  
Denys Cook

Salts of 1-methyl-2-pyridone and 1-methyl-2-quinolone with strong acids have been prepared and their infrared spectra recorded between 4 000 and 650 cm−1. Protonation of the carbonyl group occurs giving rise to OH stretching, in-plane and out-of-plane bending vibrations which absorb in characteristic regions of the spectrum, namely 1 900 – 3 300 cm−1 (depending on the anion), ~ 1 250 cm−1, and ~ 800 cm−1 respectively, with appropriate shifts on deuteration. Other tentative assignments are made.


Author(s):  
J. M. Munene ◽  
J. O. Onyatta ◽  
A. O. Yusuf

The adsorption behavior of selected metal ions on water hyacinth powder was investigated by Fourier Transform Infrared (FTIR) spectroscopy. Water hyacinth powder was used as an adsorbent due to its popularity, low cost and ease of availability. Water hyacinth stems were dried and ground to a powder. Batch adsorption experiments were conducted at room temperature by adding known concentrations of Pb2+, Cd2+, Cr3+, Zn2+ and Ni2+ to 5 g of water hyacinth powder in different test tubes and allowed to stand for the same time respectively. Adsorption is one of the methods used to remove heavy metals from aqueous solutions and wastewaters. FTIR analysis was performed to identify the functional groups in the water hyacinth powder using the KBr disc method. The study showed a strong broad absorption band in the region of 3300-3200cm-1 which is characteristic of O-H stretching vibrations of the adsorbed water molecules at the surface of raw water hyacinth powder particles. Other peaks appeared at 1732cm-1 which corresponded to C=O stretching vibrations while the band at 1396cm-1 could be attributed to C-H bonds. The functional groups identified were: C-H; O-H; C=O or C-O. After adsorption there was a disappearance, reduction or a shift in the adsorption bands depending on the type of metal ion. Lead for example showed a strong absorption band in the region of 1732cm-1 which is characteristic of C=O stretching bond structure which is found in esters and carboxylic acids. The disappearance of the peaks indicated that the H atom present in the functional groups of the raw water hyacinth powder could have been substituted with lead ion. The intensity of the adsorption bands reduced for all the metals confirming that functional groups were responsible for adsorption of the heavy metal ions on to the material.


1966 ◽  
Vol 19 (1) ◽  
pp. 107 ◽  
Author(s):  
RW Guy ◽  
RA Jones

The infrared spectra of a number of acylpyrroles have been examined in the NH and CO stretching region under high resolution in carbon tetrachloride. Analysis of the data show-s that the effect of each group on the NH stretching frequency is independent of other substituents and additive. Pyrroles having the acyl substituent in the β-position show two concentration-independent bands. The lower frequency band arises from interaction with the out-of-plane deformation of the NH group, producing a hot band.


1972 ◽  
Vol 25 (1) ◽  
pp. 27 ◽  
Author(s):  
CG Barraclough ◽  
DJ Kew

The infrared spectra of ReOCl4 and OsOCl4 have been measured in the gas phase, in the condensed phase, and in a variety of solvents. In the gas phase spectra the absorption band envelopes corresponding to the metal-oxygen stretching vibrations have been observed and the data are discussed in terms of possible square pyramidal or trigonal bipyramidal structures for the molecules. Evidence is presented showing that acetone and diethyl ether molecules will readily coordinate to these oxide tetrachlorides when dissolved in inert solvents. The effect of traces of water on the same solutions is also described and discussed. Both ReOCl4 and OsOCl4 react with the solvent if dissolved in acetone or diethyl ether and the possibility of the formation of the unknown oxide trichlorides is discussed.


Sign in / Sign up

Export Citation Format

Share Document