THE REACTIONS OF ACTIVE NITROGEN WITH ETHYLENE AND DEUTERATED ETHYLENES

1966 ◽  
Vol 44 (22) ◽  
pp. 2691-2701 ◽  
Author(s):  
Kenneth D. Foster ◽  
P. Kebarle ◽  
H. B. Dunford

The reaction of active nitrogen with ethylene and deuterated ethylenes has been investigated by use of a mass spectrometer. The rate of disappearance of atomic nitrogen in the presence of ethylene appears to obey the equation[Formula: see text]where kapp is an apparent second order rate constant and [ethylene]0 is the initial concentration of added ethylene. However, exceptions to this equation are found at 0.6 Torr either for short reaction times or for small concentrations of added ethylene, and apparently for short reaction times at 2.6 Torr when a large excess of ethylene is added. Where the above equation is obeyed, kapp = (3 ± 1) × 10−13 cc molecule−1 s−1. The formation of C2D4 in the reaction of active nitrogen with C2D3H is interpreted as further evidence for the importance of hydrogen atom reactions in intermediate steps of the reaction of active nitrogen with ethylene.

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Sayyed Mostafa Habibi-Khorassani ◽  
Malek Taher Maghsoodlou ◽  
Mehdi Shahraki ◽  
Sadegh Talaiefar ◽  
Jasem Aboonajmi

Sodium acetate was applied as an efficient catalyst for the one-pot, three-component condensation reactions consisting of 4-nitrobenzaldehyde 2, malononitrile 3, and thiobarbituric acid 1. Use of nontoxic reaction components, short reaction times, environmental, easy work-up, and high yields are some remarkable advantages of this method. Kinetics and mechanism of the reaction were spectrally studied and the second order rate constant (kovr = k1) was automatically calculated by the standard equations contained within the program. The second order rate constant [Ln(kovr = k1), Ln(kovr = k1)/T] that depended on reciprocal temperature was in good agreement with the Arrhenius and Eyring equations, respectively. This data provided the suitable plots for calculating the activation energy and parameters (Ea, ΔG‡, ΔS‡, and ΔH‡) of the reaction. Furthermore, from studying the effects of solvent, concentration, and catalyst on the reaction rate, useful information was obtained regarding the mechanism. The results showed that the first step of the reaction mechanism is a rate determining step (RDS). The proposed mechanism was confirmed in accordance with the experimental data and also the steady state approximation.


1991 ◽  
Vol 275 (2) ◽  
pp. 335-339 ◽  
Author(s):  
H C Hawkins ◽  
R B Freedman

1. The number of reactive thiol groups in mammalian liver protein disulphide-isomerase (PDI) in various conditions was investigated by alkylation with iodo[14C]acetate. 2. Both the native enzyme, as isolated, and the urea-denatured enzyme contained negligible reactive thiol groups; the enzyme reduced with dithiothreitol contained two groups reactive towards iodoacetic acid at pH 7.5, and up to five reactive groups were detectable in the reduced denatured enzyme. 3. Modification of the two reactive groups in the reduced native enzyme led to complete inactivation, and the relationship between the loss of activity and the extent of modification was approximately linear. 4. Inactivation of PDI by alkylation of the reduced enzyme followed pseudo-first-order kinetics; a plot of the pH-dependence of the second-order rate constant for inactivation indicated that the essential reactive groups had a pK of 6.7 and a limiting second-order rate constant at high pH of 11 M-1.s-1. 5. Since sequence data on PDI show the presence within the polypeptide of two regions closely similar to thioredoxin, the data strongly indicate that these regions are chemically and functionally equivalent to thioredoxin. 6. The activity of PDI in thiol/disulphide interchange derives from the presence of vicinal dithiol groups in which one thiol group of each pair has an unusually low pK and high nucleophilic reactivity at physiological pH.


1967 ◽  
Vol 45 (22) ◽  
pp. 2837-2840 ◽  
Author(s):  
A. S. Vlastaras ◽  
C. A. Winkler

The maximum yields of oxygen atoms, estimated at different levels in a long-tube reactor by gas-phase "titration" with NO2, were equal for the reactions of active nitrogen with NO and O2. In this reactor, the maximum oxygen-atom production from the oxygen reaction, determined by the amount of N2O3 produced with excess NO2, was found to correspond to the NO "titration" value for the active nitrogen and not to the maximum amount of HCN produced in the active nitrogen – ethylene reaction. A second-order rate constant, [Formula: see text] [Formula: see text]was obtained for the active nitrogen – oxygen reaction.Experiments in a short reactor showed that the validity of the analytical method based on the trapping of N2O3 depended upon adequate reaction time for the NO + NO2 reaction to occur.


Blood ◽  
2012 ◽  
Vol 120 (21) ◽  
pp. 2211-2211
Author(s):  
Ankush Chander ◽  
Helen M Atkinson ◽  
Leslie R. Berry ◽  
Anthony K.C. Chan

Abstract Abstract 2211 Introduction: Unfractionated heparin (UFH) is used for the prophylaxis and treatment of thromboembolic diseases. UFH catalyzes inhibition by antithrombin (AT) of the serine proteases in the coagulation cascade. Additionally, UFH has been shown to interact with components of the fibrinolytic pathway in vitro. However UFH has several limitations which impact its utility as a therapeutic agent. Our lab has developed a novel covalent antithrombin-heparin complex (ATH) which inhibits most serine proteases of the coagulation pathway significantly faster when compared to non covalent mixtures of AT and UFH. However, the interactions of ATH with the components of the fibrinolytic pathway have not been studied before. Thus, the present study investigates possible serpin-heparin interactions of AT + UFH vs ATH within the fibrinolytic pathway. Methods: Discontinuous second order rate constant assays under pseudo-first order conditions were carried out to obtain second order rate constant (k2) values for the inhibition of plasmin by AT+UFH versus ATH. Briefly, at specific time intervals 20 nM plasmin was inhibited by 200 nM AT + 0–5000 nM UFH or by 200 nM ATH in the presence of 2.5 mM Ca2+. Reactions were neutralized by the simultaneous addition of a solution containing polybrene and plasmin substrate S-2366™ in buffer. Residual plasmin activity was measured and the final k2 values calculated. For experiments involving tPA, wells containing 40nM tPA and increasing concentrations of AT, UFH or ATH, at mole ratios ranging from 0 to 20:1, were incubated for 15 min. Reactions with tPA were neutralized by simultaneous addition of a solution containing either polybrene and tPA substrate, S-2288™ in buffer, (ATH and UFH) or only the substrate S-2288™ in buffer (AT). Enzyme activity was then determined by measuring rate of substrate cleavage (Vmax). Results: When plasmin was inhibited by AT in the absence of UFH, k2 values of 2.82×105 +/− 4.46×104 M−1 min−1 were observed. The k2 values increased with addition of successively higher concentrations of UFH up to a plateau with maximal k2 of 5.74×106 +/− 2.78×105 M−1 min−1 at a UFH concentration of 3000nM. For inhibition of plasmin by ATH, k2 values of 6.39 × 106 +/− 5.88 × 105 M−1 min−1 were observed. Inhibition of plasmin by ATH was not significantly different when compared to the highest k2 values obtained with UFH. (p=0.36) No statistically significant difference in tPA enzyme activity was observed when Vmax values for tPA alone were compared with those in the presence of AT, UFH or ATH. (p=0.932, p=0.085, p=0.31 respectively) Significance: The characteristic shape of the curve obtained from the k2vs. UFH plot suggests that the mechanism responsible for inhibition of plasmin by AT+UFH involves conformational activation of the serpin. The k2 values in this study for inhibition of plasmin by both AT+UFH and ATH were three orders of magnitude lower than k2 values for inhibition of thrombin or factor Xa. Furthermore these results suggest that tPA is not inhibited by AT + UFH or ATH, and is not influenced by the presence of UFH alone. Cumulatively, this indicates that the fibrinolytic pathway is minimally impacted by AT + UFH or ATH, allowing maximal antithrombotic potential to be achieved during anticoagulation. Overall, the favourable anticoagulant properties of ATH combined with the findings of this study strengthens the utility of the covalent conjugate over conventional UFH for the treatment of thromboembolic disorders. Disclosures: No relevant conflicts of interest to declare.


1982 ◽  
Vol 60 (15) ◽  
pp. 1988-1995 ◽  
Author(s):  
J. C. Halle ◽  
M. J. Pouet ◽  
M. P. Simonnin ◽  
F. Debleds ◽  
F. Terrier

Reaction of 1,3,5-trinitrobenzene (TNB) with pyrrole, 2,5-dimethyl pyrrole, and 2,4-dimethyl-3-ethyl pyrrole in the presence of a strong base (CH3O−) yields nitrogen- and/or carbon-bonded 1:1 σ-complexes in dimethylsulphoxide (DMSO). Depending on the stoichiometry of the reagents, 1:2 and 2:1 pyrrole–TNB diadducts are also formed. Identification of all complexes was effected by nmr. The reactive species are shown to be the pyrrolide ions and the results emphasize the ambident character of these anions towards an aromatic electrophile. Some of the complexes have been isolated as crystalline potassium salts when experiments are performed in acetonitrile. Among the isolable complexes, the kineticallybutnotthermodynamicallyfavored nitrogen adduct of pyrrole (5a) is remarkably unreactive. The second-order rate constant kH+ for is H+-catalyzed decomposition in aqueous solution is only 1 L mol−1 s−1 (t = 25 °C).


1986 ◽  
Vol 233 (2) ◽  
pp. 553-557 ◽  
Author(s):  
R Blackmore ◽  
T Brittain

The six haem groups of the nitrite reductase enzyme isolated from Wolinella succinogenes are rapidly reduced by the addition of dithionite (S2O4(2-)). The reduction, however, is not homogeneous. Two of the haem groups, namely those that show spectral characteristics typical of five-co-ordinated haem groups, are reduced in a dithionite-concentration-dependent fashion with a rate limit of 1.5 S-1. The other four haem groups, which show spectral characteristics very similar to those of normal six-co-ordinate c-haem groups, reduce in a linear dithionite-concentration-dependent manner with a second-order rate constant of 150 M-1/2 X S-1. The ratio of the amplitudes of the two reduction phases observed in stopped-flow studies is found to be dependent on the concentration of dithionite used. A model is proposed to account for these observations, and computer simulations show that the model represents a good fit to the experimental data. The two haem groups with five-co-ordinate spectral characteristics bind CO. Flash photolysis of the CO complex exhibits one major recombination process with a linear dependence in rate on CO concentration with a second-order rate constant of 2 × 106 M-1 × S-1. By contrast, stopped-flow mixing of the reduced protein with CO shows a very complex pattern of combination, with most of the observed absorbance change associated with a concentration-independent step. These findings are rationalized in terms of structural changes in the protein consequent to ligand binding.


By use of reaction vessels with specially treated surfaces the homogeneous decomposition of formic acid has been studied kinetically in the range 436 to 532°C. Neither of the two simultaneous reactions ( a ) HCOOH = CO 2 + H 2 , ( b ) HCOOH = CO + H 2 O, is retarded by the usual inhibitors of chain processes. Each appears to be molecular. Reaction ( a ) is of the first order in the range 3 to 650 mm, the first-order rate constant being given by k CO 2 = 10 4⋅8 exp (–30600/ RT )s -1 . It is suggested tentatively that the abnormal kinetic parameters might be explained by regarding the reaction as a decarboxylation of (H + ) (HCOO¯) ion pairs present in minute concentration. Reaction ( b ) shows a pressure dependence most simply explained by a superposition of a predominant second-order component with a small first-order component. The most satisfactory interpretation of the second-order reaction is that it represents the unimolecular decomposition of dimer molecules, known to be present in formic-acid vapour. On this basis the rate constant is given by k CO dimer = 10 13⋅58 exp (–42600/ RT )s -1 , the kinetic parameters thus being in the normal range. The various alternative interpretations are discussed.


1984 ◽  
Vol 62 (3) ◽  
pp. 580-585 ◽  
Author(s):  
Parminder S. Surdhar ◽  
Rizwan Ahmad ◽  
David A. Armstrong

Spectral changes and rates of reaction of flavins and several radical species have been investigated at pH 7, 9, and 10 in the presence and absence of β-mercaptoethanol. The radicals •CO2−, eaq−, and [Formula: see text] reacted with FAD at pH 10 to give a spectrum of FAD •Fl− with rate constants of 7 ± 1 × 108 and 4 ± 1 × 108 M−1 s−1 for •CO2− and [Formula: see text] respectively. At pH 7 only •FlH was observed and at pH 9 a mixture of •FIH and •Fl−.Interactions between flavin radicals and sulphydryl at 10−4 M concentration did not cause perturbations in the uv–visible spectra until either the radical and/or the sulphydryl were ionized. With FAD at pH 9 or 10 and LFl at pH 10 the 370 nm peak of •Fl− was enhanced by about 15% and a second larger growth occurred near 450 nm in the presence of 10−4 to 10−2 M sulphydryl. We attribute this to the formation of labile intermediate RSHFl•−, which must also be involved in the reduction of Fl by [Formula: see text] at pH 9 or 10.The second order rate constant k13 for reaction of [Formula: see text] with FAD at pH 9 and 10 was found to be 4.2 ± 0.5 × 108 M−1 s−1 and 2.0 ± 0.4 × 108 M−1 s−1 respectively. The rate constant for the reaction between [Formula: see text] and LFl at pH 10 was slightly faster, 7 ± 1 × 108 M−1 s−1, probably reflecting the fact that LFl lacks the bulky negatively charged adenine dinucleotide group of FAD.


Sign in / Sign up

Export Citation Format

Share Document