Site response effects for structures located on sand sites

1990 ◽  
Vol 27 (3) ◽  
pp. 342-354 ◽  
Author(s):  
P. Henderson ◽  
A. C. Heidebrecht ◽  
N. Naumoski ◽  
J. W. Pappin
Keyword(s):  
Key Words ◽  
Seismic Design ◽  
Site Response ◽  
Response Spectra ◽  
Building Code ◽  
Base Shear ◽  
Sand Soil ◽  
Low Intensity ◽  
Soil Site ◽  
A Site

Results are presented for 4 sand sites forming part of a site response study of 11 soil sites. The results are in the form of spectral accelerations and ratios, base shear coefficients, and foundation factors. They indicate that significant amplifications can be expected at sand sites, especially for low-intensity excitation. Comparisons are made with the provisions of the proposed National Building Code of Canada (NBCC) 1990. They show that, depending on the site and the nature and level of the excitation, the expected base shears can be well in excess of the values specified by the NBCC. Key words: seismic, design, sand, soil, site, response, spectra, amplification, base, shear.

Seismic response and design for structures located on soft clay sites

1990 ◽  
Vol 27 (3) ◽  
pp. 330-341 ◽  
Author(s):  
A. C. Heidebrecht ◽  
P. Henderson ◽  
N. Naumoski ◽  
J. W. Pappin
Keyword(s):  
Seismic Design ◽  
Site Response ◽  
Soft Clay ◽  
Response Spectra ◽  
Frequency Content ◽  
Base Shear ◽  
Spectral Ratios ◽  
Low Intensity ◽  
Site Period ◽  
Code Provisions

Results are presented for 3 soft clay sites forming part of a larger response study of 11 soil sites subjected to earthquakes of varying intensity and frequency content. The results are presented in the form of spectral ratios (surface to rock), base shear coefficients, and foundation factors. They indicate that large amplifications can be expected at structural periods close to the site period. Comparisons are made with the National Building Code of Canada (NBCC) 1990 provisions for base shear coefficients and foundation factors. These show that the NBCC provisions are adequate when the excitation is low or medium period in nature. For high-period excitation of low intensity, high amplifications that exceed the code provisions are produced. Key words: seismic, design, clay, soft, site, response, spectra, amplification, base, shear.

scholarly journals Quantification of Optimal Target Reliability for Seismic Design: Methodology and Application to Midrise Steel Buildings

2021 ◽  
Author(s):  
Kasra Habibi ◽  
S. Saeid Hosseini Varzandeh ◽  
Mojtaba Mahsuli
Keyword(s):  
Seismic Design ◽  
The United States ◽  
Construction Cost ◽  
Building Code ◽  
Steel Buildings ◽  
Base Shear ◽  
Risk Models ◽  
Concentrically Braced Frame ◽  
Optimal Target

Abstract Quantification of the optimal target reliability based on the minimum lifecycle cost is the goal standard for calibration of seismic design provisions, which is yet to be fully-materialized even in the leading codes. Deviation from the optimally-calibrated design standards is significantly more pronounced in countries whose regulations are adopted from the few leading codes with no recalibration. A major challenge in the quantification of optimal target reliability for such countries is the lack of risk models that are suited for the local construction industry and design practices. This paper addresses this challenge by presenting an optimal target reliability quantification framework that tailors the available risk models for the countries from which the codes are adopted to the local conditions of the countries adopting the codes. The proposed framework is showcased through the national building code of Iran, which is adopted from the codes of the United States, using a case study of three midrise residential steel building archetypes. The archetypes have various structural systems including intermediate moment-resisting frame (IMF) and special concentrically braced frame (SCBF). Each of these archetypes are designed to different levels of the base shear coefficient, each of which corresponds to a level of reliability. To compute the lifecycle cost, the initial construction cost of buildings is estimated. Next, robust nonlinear models of these structures are generated, using which the probability distribution of structural responses and the collapse fragility are assessed through incremental dynamic analyses. Thereafter, the buildings are subjected to a detailed seismic risk analysis. Subsequently, the lifecycle cost of the buildings is computed as the sum of the initial construction cost and the seismic losses. Finally, the optimal strength and the corresponding target reliability to be prescribed are quantified based on the notion of minimum lifecycle cost. The results reveal a 50-year optimal reliability index of 2.0 and 2.1 for IMF and SCBF buildings, respectively and an optimal collapse probability given the maximum considered earthquake of 16% for both systems. In the context on the case study of the national building code of Iran, the optimal design base shear for IMF buildings is 40% higher than the current prescribed value by the code, whereas that of SCBF buildings is currently at the optimal level.

scholarly journals A Site-Specific Response Analysis: A Case Study in Hanoi, Vietnam

2020 ◽  
Vol 10 (11) ◽  
pp. 3972 ◽  
Author(s):  
Van-Quang Nguyen ◽  
Muhammad Aaqib ◽  
Duy-Duan Nguyen ◽  
Nguyen-Vu Luat ◽  
Duhee Park
Keyword(s):  
Site Response ◽  
Response Spectra ◽  
Response Analysis ◽  
Specific Response ◽  
Site Class ◽  
Soil Stiffness ◽  
Design Spectrum ◽  
Class D ◽  
The Difference ◽  
A Site

A series of one-dimensional (1-D) site response analyses were performed using the nonlinear (NL) and equivalent linear (EQL) approaches to assess the applicability of the Vietnamese earthquake-resistance design code TCVN 9386: 2012. Six soil profiles were selected from three districts in Hanoi (Vietnam). A number of ground motions compatible with the rock design spectrum were used as input for carrying out analyses. The results highlight that the calculated response is higher than the design spectrum for site class C and lower for site class D. The normalized response spectra of the EQL approach results are higher than those of the NL approach. Moreover, the peak ground accelerations at the surface from EQL analyses are greater than those of the NL method because the latter generates a higher amount of nonlinearity. The results from the NL approach also illustrate that the deamplification phenomenon occurs in the soft soils of the Hanoi region (e.g., soil profile P3 and P5 of site class D). Additionally, the shear strains calculated from the NL method are closely matched with those from the EQL method, the difference between them increasing with a decrease in soil stiffness.

Influence of site amplification of seismic ground motions on forces in building structures

1991 ◽  
Vol 18 (6) ◽  
pp. 964-973
Author(s):  
A. C. Heidebrecht ◽  
P. Henderson ◽  
N. Naumoski ◽  
J. W. Pappin
Keyword(s):  
Site Response ◽  
Ground Motions ◽  
Site Amplification ◽  
Building Structures ◽  
Base Shear ◽  
Design Code ◽  
Seismic Design Code ◽  
Soil Site ◽  
Response Amplification ◽  
Different Characteristics

The results for nine sites with different characteristics subjected to earthquakes of varying intensity and frequency content are presented in the form of base shear coefficients, base shear coefficient ratios (surface to rock), and foundation factors. They indicate that large amplifications can be expected at structural periods close to the site periods, especially for low intensity excitation. Comparisons are made with the provisions of the National Building Code of Canada (NBCC) 1990. They show that, depending on the site and the nature and level of the excitation, the expected base shear can be well in excess of the values specified by the NBCC. Key words: seismic, design, code, soil, site, response, amplification, base, shear.

scholarly journals Assessment of the Design Spectrum with Aggravation Factors by 2D Nonlinear Numerical Analyses: A Case Study in Gemlik Basin, Turkey

2021 ◽  
Author(s):  
BİLAL ÖZASLAN ◽  
Recep Iyisan ◽  
Emre Murat Hasal ◽  
Hadi Khanbabazadeh ◽  
Hiroaki Yamanaka
Keyword(s):  
Seismic Waves ◽  
Plastic Material ◽  
Site Response ◽  
Response Spectra ◽  
Considerable Effect ◽  
Design Spectrum ◽  
The North ◽  
Basin Effects ◽  
Stratification Effect ◽  
A Site

Abstract The response spectra of multidimensional analyses are compared with the one-dimensional (1D) local models to couple the irregular soil stratification effect in a site. In recent studies, the surface motion spectra ratios of 2D/1D or 3D/1D are defined as spectral aggravation factors for each region in a site. Particularly in alluvial basins, where the soil media is typically formed by fault ruptures or topographic depressions filled with sediments, the inclination of the rock outcrop in the edge of the basin has a considerable effect on the site response, and such effect has not yet been taken into consideration of recent seismic building codes and general engineering applications. In this study, the natural alluvial basin near the North Anatolian Fault in Gemlik, Maramara Region, Turkey, was investigated by 40 seismic site tests and 4 validation borings. The 2D and 1D nonlinear response history analyses in north-south and east-west directions of the Gemlik basin were performed by numerical model on finite difference scheme considering nonlinear elasto-plastic material behaviors and geometric discontinuities. 22 strong ground motions recorded on rock site are excited vertically as SH waves. The numerical results exhibited the narrow basin effects are derived not only by reflection, refraction, and shifting behavior but also by focusing and superposition of the seismic waves propagating from both opposite basin edges. As a result, the site-specific spectral aggravation factors, SAF2D/1D defined by the ratio between the 2D and 1D acceleration response spectra for each period and any location on the site, were proposed for the Gemlik basin. The variations of the aggravation factors were observed as increasing values to 1.2–2.2 on the near edge and basin center.

Seismic analysis of short-period structures subjected to the 1988 Saguenay earthquake

1992 ◽  
Vol 19 (3) ◽  
pp. 510-520 ◽  
Author(s):  
Pierre Léger ◽  
Angelo Romano
Keyword(s):  
Seismic Design ◽  
Seismic Analysis ◽  
Strong Motion ◽  
Response Spectra ◽  
Base Shear ◽  
Ductility Demand ◽  
Short Period ◽  
Modification Factor ◽  
Energy Dissipation Capacity ◽  
Design Earthquake

This paper presents elastic and inelastic response spectra of strong motion accelerograms recorded during the 1988 Saguenay earthquake. Comparisons are made with the National Building Code of Canada (NBC) 1990 lateral forces requirements for the seismic resistant design of short-period structures. The use of a period-dependent force modification factor is proposed to take advantage of the energy dissipation capacity of short-period structures on a more rational basis. The seismic response of a typical low-rise steel building designed according to the NBC 1990 and CAN3-S16.1-M89 is then investigated. It is shown that to obtain a realistic picture of the ductility demand of low-rise buildings, the structural overstrength, that is, the supplied strength in excess of the seismic design base shear, should be explicitly considered in the design process. Key words: seismic design, earthquake, low-rise structures, code.

Evolution of seismic design provisions in the National building code of Canada

2010 ◽  
Vol 37 (9) ◽  
pp. 1157-1170 ◽  
Author(s):  
Denis Mitchell ◽  
Patrick Paultre ◽  
René Tinawi ◽  
Murat Saatcioglu ◽  
Robert Tremblay ◽  
...  
Keyword(s):  
Energy Dissipation ◽  
Seismic Design ◽  
Seismic Hazards ◽  
Building Code ◽  
Hazard Maps ◽  
Base Shear ◽  
Reinforced Concrete Frame ◽  
Concrete Frame ◽  
Wall Structures ◽  
Energy Dissipation Capacity

The purpose of this paper is to provide a summary of the evolution of seismic design in Canada. This paper presents the significant changes to the approach taken in determining seismic hazards and seismic hazard maps, and describes the evolution of the seismic design provisions of the National building code of Canada. The introduction of important parameters in determining the seismic base shear such as the period of vibration of the structure, the influence of type of soil, and the concepts of ductility and energy dissipation capacity of elements and structures are presented. The levels of seismic design base shears, determined from different versions of the National Building Code of Canada, are compared for reinforced concrete frame and wall structures to illustrate the changes.

Response Modification Factor for Y-Eccentric-Braced Steel Frame Structures

2011 ◽  
Vol 250-253 ◽  
pp. 2285-2290
Author(s):  
Wen Xia Yang ◽  
Qiang Gu ◽  
Zhen Sen Song
Keyword(s):  
Seismic Design ◽  
Pushover Analysis ◽  
Steel Frames ◽  
Design Procedure ◽  
Response Spectra ◽  
Elastic Response ◽  
Base Shear ◽  
Response Modification Factor ◽  
Elastic Response Spectra ◽  
Modification Factor

In current seismic design procedure, structural base shear is calculated according to the linear elastic response spectra divided by response modification factorR. The response modification factor is important to the reliability and economy of building seismic design. In this paper, the response modification factors of Twelve Y-eccentric braced steel frames with various stories and spans lengths were evaluated by capacity spectrum method based on the global capacity envelops obtained from an improved pushover analysis and incremental dynamic analysis. According to the results, an appropriate formula of the response modification factor for the Y-eccentric braced steel frames was suggested.

A proposed dynamic foundation factor for the National Building Code of Canada

1991 ◽  
Vol 18 (6) ◽  
pp. 974-984 ◽  
Author(s):  
Kamel Elhmadi ◽  
Arthur C. Heidebrecht
Keyword(s):  
Parametric Study ◽  
Site Response ◽  
Site Amplification ◽  
Building Code ◽  
Dense Sand ◽  
Study Results ◽  
Soil Deposits ◽  
Class 1 ◽  
Soil Site ◽  
Strong Ground

Results of a parametric study on site response effects due to seismic strong ground motions are used in this paper to develop a new "dynamic foundation factor" for the National Building Code of Canada. In order to capture the effect of the site resonance, the proposed dynamic foundation factor, F*, is given as a function of the ratio between the fundamental period of the building and the site period, T/Ts (i.e., F* spectra in terms of T/Ts). The parametric study results suggested that the proposed F* spectra be dependent on four different classes of soil deposits. These classes are deep cohesive (class 1), deep cohesionless (class 2), shallow cohesive and cohesionless (class 3), and dense sand (class 4). For classes 1 and 2, the F* spectra are independent of the ratio of peak acceleration to peak velocity, av, of the seismic ground motion. For classes 3 and 4, however, the F* spectra are an increasing function of the ratio a/v. A scaling multiplier is introduced to take into account the influence of level of intensity, v. The proposed dynamic foundation factor is compared with the National Building Code of Canada 1990 foundation factor. Finally, actual sites are used to check the validity and consistency of the proposed dynamic foundation factor. Key words: seismic, foundation factor, soil, site, amplification, building, shear, force, period, spectra.

Sign in / Sign up

Export Citation Format

Share Document