A technique for long-term storage of clay samples

1986 ◽  
Vol 23 (4) ◽  
pp. 602-605 ◽  
Author(s):  
P. La Rochelle ◽  
S. Leroueil ◽  
F. Tavenas

This note describes a technique for sealing and storing clay samples so as to prevent aging effects during long periods of storage. It also gives the results of a study carried out on samples stored from 3 to 8 years, which prove the efficiency of that technique; the liquid limits, the liquidity indices, and the pH values remained constant during these long periods of storage. Key words: sensitive clay, storing, sealing, aging.

2012 ◽  
Author(s):  
O.K. Chopra ◽  
D. Diercks ◽  
R. Fabian ◽  
D. Ma ◽  
V. Shah ◽  
...  

Author(s):  
Omesh Chopra ◽  
Dwight Diercks ◽  
David Ma ◽  
Vikram Shah ◽  
Shiu-Wing Tam ◽  
...  

The cancellation of the Yucca Mountain repository program in the Unites States raises the prospect of very long-term storage (i.e., >120 years) and deferred transportation of used fuel at the nuclear power plant sites. While long-term storage of used nuclear fuel in dry cask storage systems (DCSSs) at Independent Spent Fuel Storage Installations (ISFSIs) is already a standard practice among U.S. utilities, recent rule-making activities of the U.S. Nuclear Regulatory Commission (NRC) indicated additional flexibility for the NRC licensees of ISFSIs and certificate holders of the DCSSs to request initial and renewal terms for up to 40 years. The proposed rule also adds a requirement that renewal applicants must provide descriptions of aging management programs (AMPs) and time-limited aging analyses (TLAAs) to ensure that the structures, systems, and components (SSCs) that are important to safety in the DCSSs will perform as designed under the extended license terms. This paper examines issues related to managing aging effects on DCSSs for very long-term storage (VLTS) of used fuels, capitalizing on the extensive knowledge and experience accumulated from the work on aging research and life cycle management at Argonne National Laboratory (ANL) over the last 30 years. The technical basis for acceptable AMPs and TLAAs is described, as are generic AMPs and TLAAs that are being developed by Argonne under the support of the U.S. Department of Energy (DOE) Used Fuel Disposition Campaign for R&D on extended long-term storage and transportation.


2007 ◽  
Vol 40 (4) ◽  
pp. 796-798 ◽  
Author(s):  
Bingyun Ao ◽  
Xiaolin Wang ◽  
Yongjun Wei ◽  
Yanzhi Zhang

In order to help resolve unknowns regarding aging effects of uranium during long-term storage of tritium, a number of experiments have been carried out by several researchers. However, almost no literature is available on the structural change of uranium tritide, mainly because its high toxicity and air-sensitivity render appropriate experiments very difficult. In this paper, a simple hermetic sample holder that fits the Philips X'Pert Pro X-ray diffractometer is described. It may be used to study the aging effects of uranium tritide during storage. The sample holder mainly consists of an aluminium container for sample storage and a Mylar window for X-ray measurements. This sample holder can also be used with other air-sensitive, radioactive and toxic materials. In this paper, the first results obtained from X-ray diffraction analysis of uranium hydride are presented.


2021 ◽  
Vol 3 (1) ◽  
pp. 19-28
Author(s):  
Gina Alina Catrina ◽  
◽  
Bogdan Stanescu ◽  
Agnes Serbanescu ◽  
Georgiana Cernica ◽  
...  

Long-term landfilling of hazardous waste should be a careful choice for any producer or generator of waste, as the behavior of the waste is different due to the physical-chemical conditions or following contact with other hazardous waste. In this study, the research undertaken was aimed at developing an experimental method for the assessment and characterization of hazardous waste for long-term storage. The method consists in the assessment of the behavior of heavy metals from waste, under different leaching conditions. To study various hazardous wastes, fly ash from the incineration of medical waste and slag from aluminum casting were chosen. Contact time, pH and redox potential are important parameters in the leaching process. The solubility of metals increases at pH values between 2 - 5 pH units and decreases at pH values between 6-12 pH units. The highest solubility of metals (As, Cr, Cu, Ni, Pb and Zn) in the tested waste was obtained after 48 hours at pH values between 2 - 5 pH units. Also, the values of the redox potential decrease almost linearly as the pH value increases. The developed method is a useful tool to assess the behavior of hazardous waste for long-term storage in landfills for this category of wastes.


1992 ◽  
Vol 38 (8) ◽  
pp. 861-864 ◽  
Author(s):  
Gary C. Johnson ◽  
Andrew K. Martin

Subcultures of 1064 isolates of 393 species of wood-inhabiting fungi were stored both under sterile mineral oil and in sterile water for 10 years. A high proportion (98%) of the Basidiomycotina isolates survived storage under oil, whereas only 26% survived in sterile water. Survival of most isolates of Ascomycotina (91% under oil, 72% in water) and Deuteromycotina (96% under oil, 92% in water) was somewhat less in water than under oil. Key words: fungal storage, long-term storage, oil storage, water storage, Basidiomycotina.


2001 ◽  
Vol 6 (2) ◽  
pp. 3-14 ◽  
Author(s):  
R. Baronas ◽  
F. Ivanauskas ◽  
I. Juodeikienė ◽  
A. Kajalavičius

A model of moisture movement in wood is presented in this paper in a two-dimensional-in-space formulation. The finite-difference technique has been used in order to obtain the solution of the problem. The model was applied to predict the moisture content in sawn boards from pine during long term storage under outdoor climatic conditions. The satisfactory agreement between the numerical solution and experimental data was obtained.


Diabetes ◽  
1997 ◽  
Vol 46 (3) ◽  
pp. 519-523 ◽  
Author(s):  
G. M. Beattie ◽  
J. H. Crowe ◽  
A. D. Lopez ◽  
V. Cirulli ◽  
C. Ricordi ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document