Effects of radiation pasteurization on Salmonella. III. Radiation lethality and the frequency of mutation to antibiotic resistance

1971 ◽  
Vol 17 (3) ◽  
pp. 385-389 ◽  
Author(s):  
Joseph J. Previte ◽  
Y. Chang ◽  
H. M. El-Bisi
Keyword(s):  
Mutation Frequency ◽  
Brain Heart Infusion ◽  
Tetracycline Resistance ◽  
Processing Parameters ◽  
The Public ◽  
Typhimurium Strain ◽  
Radiation Resistant ◽  
The Difference ◽  
Public Health Hazards ◽  
Effects Of Radiation

The radiation resistance (D, in megarads) of six strains of Salmonella irradiated at 4C in brain heart infusion suspension ranged from 0.042 for S. enteritidis to 0.084 for S. thompson. The resistance values were 0.048 for S. typhimurium, strain SR-11, 0.060 for S. typhimurium, strain RIA, and S. newport, and 0.078 for S. heidelberg. The mutation frequency to tetracycline resistance of S. typhimurium, strain SR-11, increased between 0 and 0.05 Mrad and declined thereafter with increasing radiation dose. After 0.5-Mrad exposure, the mutation frequency was essentially the same as in control populations. The mutation frequency to streptomycin resistance of S. typhimurium, strain SR-11, decreased at doses greater than 0.05 Mrad and increased only slightly for the more radiation-resistant serotypes, S. typhimurium, strain RIA, S. thompson, and S. heidelberg. The average mutation frequency of the four Salmonella cultures tested was essentially unchanged (less than 1 log difference) between 0.05 and 0.5 Mrad, while the difference in reduction in viable numbers was 5 logs or greater. The evidence presented indicates that with the proper choice of processing parameters, the application of radiation pasteurization could drastically reduce the possibility of transmission of Salmonella by poultry and thereby decrease the public health hazards associated with this microorganism.

Effects of radiation pasteurization on Salmonella. I. Parameters affecting survival and recovery from chicken

1970 ◽  
Vol 16 (6) ◽  
pp. 465-471 ◽  
Author(s):  
Joseph J. Previte ◽  
Y. Chang ◽  
H. M. El-Bisi
Keyword(s):  
Ionizing Radiation ◽  
Salmonella Typhimurium ◽  
Growth Medium ◽  
Yeast Extract ◽  
Brain Heart Infusion ◽  
Complex Media ◽  
Germ Free ◽  
Typhimurium Strain ◽  
Effects Of Radiation ◽  
Different Strains

Growth of Salmonella typhimurium, strain RIA, in minimal broth supplemented with methionine, produced a population of cells that was more sensitive to 60Co irradiation than were those grown in brain heart infusion. The resistance values (D) were 0.056 and 0.066 Mrad, respectively. D was not significantly different when the bacteria were irradiated at 4 °C on fresh or frozen-thawed germ-free chicken, or on conventional chicken sterilized by autoclaving, or by exposure to 2 Mrad of ionizing radiation. It was generally higher when the cells were irradiated in the original growth medium than on chicken. D of five different strains of S. typhimurium irradiated at 4 °C on autoclaved chicken varied from 0.052 to 0.068 Mrad. The greatest increase in resistance was produced by decreasing the temperature during irradiation. S. typhimurium, RIA, attained a D value of 0.293 Mrad at −80 °C. The effect of the recovery media on survival is equivocal. In some instances nutrient and minimal agar seemed to provide slightly better recovery of strains SR-11 and RIA. Enrichment of complex media with yeast extract did not increase recovery. The results indicate that of those parameters studied, the most significant effects on resistance were due to the temperature during irradiation.

Motivasi dan kepuasan kerja pegawai puskesmas BLUD dan non-BLUD Kabupaten Semarang

2018 ◽  
Vol 2 (3) ◽  
pp. 111
Author(s):  
Aswindar Adhi Gumilang ◽  
Tri Pitara Mahanggoro ◽  
Qurrotul Aini
Keyword(s):  
Public Health ◽  
Job Satisfaction ◽  
Financial Management ◽  
Work Motivation ◽  
P Value ◽  
The Public ◽  
The Status ◽  
The Difference ◽  
Demand For Health ◽  
Public Demand

The public demand for health service professionalism and transparent financial management made some Puskesmas in Semarang regency changed the status of public health center to BLUD. The implementation of Puskesmas BLUD and non-BLUD requires resources that it can work well in order to meet the expectations of the community. The aim of this study is to know the difference of work motivation and job satisfaction of employees in Puskesmas BLUD and non-BLUD. Method of this research is a comparative descriptive with a quantitative approach. The object of this research are work motivation and job satisfaction of employees in Puskesmas BLUD and non-BLUD Semarang regency. This Research showed that Sig value. (P-value) work motivation variable was 0.019 smaller than α value (0.05). It showed that there was a difference of work motivation of employees in Puskemas BLUD and non-BLUD. Sig value (P-value) variable of job satisfaction was 0.020 smaller than α value (0.05). It showed that there was a difference of job satisfaction of BLUD and non-BLUD. The average of non-BLUD employees motivation were 76.59 smaller than the average of BLUD employees were 78.25. The average of job satisfaction of BLUD employees were 129.20 bigger than the average of non-BLUD employee were 124.26. Job satisfaction of employees in Puskesmas BLUD was higher than non-BLUD employees.

Evaluation of the impact of public investment programs on social and economic performance of territories

2019 ◽  
pp. 109-123
Author(s):  
I. E. Limonov ◽  
M. V. Nesena
Keyword(s):  
Bayesian Modeling ◽  
Positive Impact ◽  
Public Investment ◽  
Difference In Differences ◽  
The Public ◽  
Export Activity ◽  
Regional Investment ◽  
The Difference ◽  
The Impact ◽  
Development Institution

The purpose of this study is to evaluate the impact of public investment programs on the socio-economic development of territories. As a case, the federal target programs for the development of regions and investment programs of the financial development institution — Vnesheconombank, designed to solve the problems of regional development are considered. The impact of the public interventions were evaluated by the “difference in differences” method using Bayesian modeling. The results of the evaluation suggest the positive impact of federal target programs on the total factor productivity of regions and on innovation; and that regional investment programs of Vnesheconombank are improving the export activity. All of the investments considered are likely to have contributed to the reduction of unemployment, but their implementation has been accompanied by an increase in social inequality.

Perancangan Boneka Edukasi Terinspirasi oleh Pencipta Boneka Si Unyil

2018 ◽  
Vol 1 ◽  
Author(s):  
Azhari Amri
Keyword(s):  
Design Process ◽  
Urban Culture ◽  
Urban Life ◽  
Rural Region ◽  
The Public ◽  
The Creation ◽  
The Difference ◽  
The City ◽  
Simple Materials

Film Unyil puppet comes not just part of the entertainment world that can be enjoyed by people from the side of the story, music, and dialogue. However, there is more value in it which is a manifestation of the creator that can be absorbed into the charge for the benefit of educating the children of Indonesia to the public at large. The Unyil puppet created by the father of Drs. Suyadi is one of the works that are now widely known by the whole people of Indonesia. The process of creating a puppet Unyil done with simple materials and formation of character especially adapted to the realities of the existing rural region. Through this process, this research leads to the design process is fundamentally educational puppet inspired by the creation of Si Unyil puppet. The difference is the inspiring character created in this study is on the characters that exist in urban life, especially the city of Jakarta. Thus the results of this study are the pattern of how to shape the design of products through the creation of the puppet with the approach of urban culture.

Auditors' and Investors' Perceptions of the “Expectation Gap”

2001 ◽  
Vol 15 (4) ◽  
pp. 345-358 ◽  
Author(s):  
John E. McEnroe ◽  
Stanley C. Martens
Keyword(s):  
Empirical Studies ◽  
Primary User ◽  
Financial Statement ◽  
User Group ◽  
Accounting Profession ◽  
The Public ◽  
Government Accounting ◽  
Expectation Gap ◽  
The Difference

The auditing “expectation gap” refers to the difference between (1) what the public and other financial statement users perceive auditors' responsibilities to be and (2) what auditors believe their responsibilities entail. The notion of this divergence receives much attention in the accounting literature (i.e., Commission on Auditors' Responsibilities 1978; Guy and Sullivan 1988; AICPA 1993; U.S. Government Accounting Office 1996). Although prior empirical studies encompass certain expectations associated with a range of audit services, these papers often involve the opinions of bankers as the primary user group employed in the research (Nair and Rittenberg 1987; Lowe and Pany 1995). In contrast, this study extends the prior research by directly comparing audit partners' and investors' perceptions of auditors' responsibilities involving various dimensions of the attest function. We conducted the study to determine if an expectation gap currently exists and we find that it does; investors have higher expectations for various facets and/or assurances of the audit than do auditors. Our findings serve as evidence that the accounting profession should engage in appropriate measures to reduce this expectation gap.

scholarly journals Numerical Simulation of Effect of Different Initial Morphologies on Melt Hydrodynamics in Laser Polishing of Ti6Al4V

Micromachines ◽  
2021 ◽  
Vol 12 (5) ◽  
pp. 581
Author(s):  
Kai Li ◽  
Zhenyu Zhao ◽  
Houming Zhou ◽  
Hao Zhou ◽  
Jie Yin ◽  
...  
Keyword(s):  
Flow Behavior ◽  
Processing Parameters ◽  
Surface Finishing ◽  
Polished Surface ◽  
Laser Polishing ◽  
Starting Position ◽  
Double Spiral ◽  
The Difference ◽  
Thermocapillary Forces ◽  
Surface Morphologies

As a surface finishing technique for rapid remelting and re-solidification, laser polishing can effectively eliminate the asperities so as to approach the feature size. Nevertheless, the polished surface quality is significantly sensitive to the processing parameters, especially with respect to melt hydrodynamics. In this paper, a transient two-dimensional model was developed to demonstrate the molten flow behavior for different surface morphologies of the Ti6Al4V alloy. It is illustrated that the complex evolution of the melt hydrodynamics involving heat conduction, thermal convection, thermal radiation, melting and solidification during laser polishing. Results show that the uniformity of the distribution of surface peaks and valleys can improve the molten flow stability and obtain better smoothing effect. The high cooling rate of the molten pool resulting in a shortening of the molten lifetime, which prevents the peaks from being removed by capillary and thermocapillary forces. It is revealed that the mechanism of secondary roughness formation on polished surface. Moreover, the double spiral nest Marangoni convection extrudes the molten to the outsides. It results in the formation of expansion and depression, corresponding to nearby the starting position and at the edges of the polished surface. It is further found that the difference between the simulation and experimental depression depths is only about 2 μm. Correspondingly, the errors are approximately 8.3%, 14.3% and 13.3%, corresponding to Models 1, 2 and 3, respectively. The aforementioned results illustrated that the predicted surface profiles agree reasonably well with the experimentally measured surface height data.

Scenarios as Tools of the Scientific Imagination: The Case of Climate Projections

2021 ◽  
Vol 29 (1) ◽  
pp. 36-61
Author(s):  
Michael Poznic ◽  
Rafaela Hillerbrand
Keyword(s):  
Scientific Community ◽  
Climate Science ◽  
The Other ◽  
Climate Projections ◽  
Public Realm ◽  
The Public ◽  
Other Hand ◽  
The Difference ◽  
The One ◽  
Scientific Imagination

Climatologists have recently introduced a distinction between projections as scenario-based model results on the one hand and predictions on the other hand. The interpretation and usage of both terms is, however, not univocal. It is stated that the ambiguities of the interpretations may cause problems in the communication of climate science within the scientific community and to the public realm. This paper suggests an account of scenarios as props in games of make-belive. With this account, we explain the difference between projections that should be make-believed and other model results that should be believed.

Analysis on Kinematic Characteristics of Precision Balls Grinding

2012 ◽  
Vol 497 ◽  
pp. 20-24
Author(s):  
Yong Dai ◽  
Dong Hui Ding ◽  
Xu Xiao ◽  
Xue Shi Liu ◽  
Rui Jiang He ◽  
...  
Keyword(s):  
Numerical Analysis ◽  
Great Influence ◽  
Processing Parameters ◽  
Important Influence ◽  
Normal Movement ◽  
Motion State ◽  
Kinematic Characteristics ◽  
The Difference

In the process of grinding precision balls, the motion state of balls has an important influence on the efficiency and quality. However, the normal movement of balls will be damaged because of slipping, so it must be avoided. Besides, to process different materials of balls, it should use different processing parameters. This paper studies a numerical analysis on the kinematic characteristics of the motion of balls, analyzes processing parameters which impact the motion of balls during grinding and the difference of the motion state of bearing balls and resin balls. Study shows grinding pressure and plate speed have a great influence to the motion of balls during grinding.

scholarly journals Existence of outsiders as a characteristic of online communication networks

2018 ◽  
Vol 6 (4) ◽  
pp. 431-447
Author(s):  
TARO TAKAGUCHI ◽  
TAKANORI MAEHARA ◽  
KEN-ICHI KAWARABAYASHI ◽  
MASASHI TOYODA
Keyword(s):  
Social Networking ◽  
Communication Networks ◽  
Online Communication ◽  
Interaction Structure ◽  
Social Networking Services ◽  
The Public ◽  
User Groups ◽  
The Difference ◽  
Node Removal ◽  
Number Of Individuals

AbstractOnline social networking services involve communication activities between large number of individuals over the public Internet and their crawled records are often regarded as proxies of real (i.e., offline) interaction structure. However, structure observed in these records might differ from real counterparts because individuals may behave differently online and non-human accounts may even participate. To understand the difference between online and real social networks, we investigate an empirical communication network between users on Twitter, which is perhaps one of the largest social networking services. We define a network of user pairs that send reciprocal messages. Based on the correlation between degree of adjacent nodes observed in this network, we hypothesize that this network differs from conventional understandings in the sense that there is a small number of distinctive users that we call outsiders. Outsiders do not belong to any user groups but they are connected with different groups, while not being well connected with each other. We identify outsiders by maximizing the degree assortativity coefficient of the network via node removal, thereby confirming that local structural properties of outsiders identified are consistent with our hypothesis. Our findings suggest that the existence of outsiders should be considered when using Twitter communication networks for social network analysis.

scholarly journals Esham, the Origin of Sukuk for Facing the Crisis: Historical Experience

2021 ◽  
Vol 10 (1) ◽  
pp. 45
Author(s):  
Khairunnisa Musari
Keyword(s):  
Lower Cost ◽  
Low Cost ◽  
Foreign Debt ◽  
Historical Experience ◽  
The Public ◽  
Goods And Services ◽  
The Past ◽  
State Budgets ◽  
The Difference ◽  
The Government

Pandemic brings a crisis. This makes world leaders have to work hard and smartly in managing state budgets. During the heyday of Islam, Muslims also faced crises. Given that time the power of Islam mastered many areas of the world, it can be assumed that the crisis that occurred in the past was a global crisis as it is happening today. The difference is the crisis that occurred at the time because of losing the war. This paper tries to describe the historical experience of the esham, one of the fiscal instruments in the Islamic world that helped the Ottoman Empire overcome the crisis. Esham has mobilized low-cost funds from the public in a relatively concise time. Esham served as a better choice than looking for foreign debt. As the origin of sukuk, esham has simpler structure so that can be used as an alternative to sukuk with a lower cost. To deal with a crisis, esham may intervene in the economy. Esham funds to the real sector in turn will help the government drive the economy as well as control prices in the market for goods and services. Therefore, esham has the potential in facing the crisis.

Sign in / Sign up

Export Citation Format

Share Document