scholarly journals Numerical Simulation of Effect of Different Initial Morphologies on Melt Hydrodynamics in Laser Polishing of Ti6Al4V

Micromachines ◽  
2021 ◽  
Vol 12 (5) ◽  
pp. 581
Author(s):  
Kai Li ◽  
Zhenyu Zhao ◽  
Houming Zhou ◽  
Hao Zhou ◽  
Jie Yin ◽  
...  
Keyword(s):  
Flow Behavior ◽  
Processing Parameters ◽  
Surface Finishing ◽  
Polished Surface ◽  
Laser Polishing ◽  
Starting Position ◽  
Double Spiral ◽  
The Difference ◽  
Thermocapillary Forces ◽  
Surface Morphologies

As a surface finishing technique for rapid remelting and re-solidification, laser polishing can effectively eliminate the asperities so as to approach the feature size. Nevertheless, the polished surface quality is significantly sensitive to the processing parameters, especially with respect to melt hydrodynamics. In this paper, a transient two-dimensional model was developed to demonstrate the molten flow behavior for different surface morphologies of the Ti6Al4V alloy. It is illustrated that the complex evolution of the melt hydrodynamics involving heat conduction, thermal convection, thermal radiation, melting and solidification during laser polishing. Results show that the uniformity of the distribution of surface peaks and valleys can improve the molten flow stability and obtain better smoothing effect. The high cooling rate of the molten pool resulting in a shortening of the molten lifetime, which prevents the peaks from being removed by capillary and thermocapillary forces. It is revealed that the mechanism of secondary roughness formation on polished surface. Moreover, the double spiral nest Marangoni convection extrudes the molten to the outsides. It results in the formation of expansion and depression, corresponding to nearby the starting position and at the edges of the polished surface. It is further found that the difference between the simulation and experimental depression depths is only about 2 μm. Correspondingly, the errors are approximately 8.3%, 14.3% and 13.3%, corresponding to Models 1, 2 and 3, respectively. The aforementioned results illustrated that the predicted surface profiles agree reasonably well with the experimentally measured surface height data.

scholarly journals In-Situ Laser Polishing Additive Manufactured AlSi10Mg: Effect of Laser Polishing Strategy on Surface Morphology, Roughness and Microhardness

Materials ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 393
Author(s):  
Jiantao Zhou ◽  
Xu Han ◽  
Hui Li ◽  
Sheng Liu ◽  
Shengnan Shen ◽  
...  
Keyword(s):  
Surface Quality ◽  
Molten Pool ◽  
Surface Defects ◽  
Polished Surface ◽  
Transient Model ◽  
Surface Evolution ◽  
Powder Bed ◽  
Laser Polishing ◽  
Surface Morphologies

Laser polishing is a widely used technology to improve the surface quality of the products. However, the investigation on the physical mechanism is still lacking. In this paper, the established numerical transient model reveals the rough surface evolution mechanism during laser polishing. Mass transfer driven by Marangoni force, surface tension and gravity appears in the laser-induced molten pool so that the polished surface topography tends to be smoother. The AlSi10Mg samples fabricated by laser-based powder bed fusion were polished at different laser hatching spaces, passes and directions to gain insight into the variation of the surface morphologies, roughness and microhardness in this paper. The experimental results show that after laser polishing, the surface roughness of Ra and Sa of the upper surface can be reduced from 12.5 μm to 3.7 μm and from to 29.3 μm to 8.4 μm, respectively, due to sufficient wetting in the molten pool. The microhardness of the upper surface can be elevated from 112.3 HV to 176.9 HV under the combined influence of the grain refinement, elements distribution change and surface defects elimination. Better surface quality can be gained by decreasing the hatching space, increasing polishing pass or choosing apposite laser direction.

scholarly journals Investigation into the Influence of Division Pier on the Internal Flow and Pulsation in the Outlet Conduit of an Axial-Flow Pump

2021 ◽  
Vol 11 (15) ◽  
pp. 6774
Author(s):  
Fan Yang ◽  
Dongjin Jiang ◽  
Tieli Wang ◽  
Pengcheng Chang ◽  
Chao Liu ◽  
...  
Keyword(s):  
Velocity Distribution ◽  
Pressure Pulsation ◽  
Axial Flow ◽  
Hydraulic Loss ◽  
Main Frequency ◽  
Starting Position ◽  
The Difference ◽  
Axial Flow Pump ◽  
Outlet Conduit ◽  
Flow Pump

The outlet conduit is an important construction connecting the outlet of the pump guide vane and the outlet pool; in order to study the hydraulic performance of the straight outlet conduit of the axial-flow pump device, this paper adopts the method of numerical simulation and analyzes the influence of the division pier on the pressure and velocity distribution inside and near the wall of the straight outlet conduit based on three design schemes. Four pressure pulsation measuring points were arranged in the straight outlet conduit, and the low-frequency pulsation characteristic information inside the straight outlet conduit with and without the division pier was extracted by wavelet packet reconstruction. The results show that the addition of a division pier has an effect on the hydraulic loss, near-wall pressure and velocity distribution in the straight outlet conduit. A small high-pressure zone is formed near the wall at the starting position of the division pier, and a large high-speed zone is formed on the left side at the starting position of the division pier. The length of the division pier has no significant effect on the flow distribution of the straight outlet conduit and the pressure and velocity distribution near the wall. Under different working conditions, each monitoring point has the maximum energy in the sub-band (0~31.25 Hz). With the increase of the flow rate, the total pressure energy of the straight outlet conduit decreases gradually. Under each condition, the difference of the energy proportion of the horizontal monitoring points of the straight outlet conduit is small, and the difference of the energy proportion of the two monitoring points at the top and bottom of the outlet channel is relatively large. The energy of the two monitoring points in the straight outlet conduit with a division pier is smaller than that of the two monitoring points in the straight outlet conduit without a division pier. There are differences in the main frequency and the power spectrum corresponding to the main frequency of the monitoring points in the straight outlet conduit, and the reasonable setting of the division pier is conducive to reducing the pressure pulsation of the flow in the straight outlet conduit and is beneficial to the safe and stable operation of the pump device.

Swirling Fluidized Bed Polishing: A New Non-Conventional Method of Surface Modification

2015 ◽  
Vol 813-814 ◽  
pp. 634-640
Author(s):  
N.K. Francis ◽  
K.G. Viswanadhan ◽  
M.M. Paulose
Keyword(s):  
Surface Modification ◽  
Fluidized Bed ◽  
Metal Removal ◽  
Complex Geometry ◽  
Removal Rate ◽  
Abrasive Particle ◽  
Surface Finishing ◽  
Polished Surface ◽  
Work Piece ◽  
Machining Accuracy

Swirling Fluidized Bed Polishing (SFBP) is a non–traditional alternative abrasive flow surface finishing form of Fluidized Bed Machining (FBM) in which the former has special features to overcome certain significant limitations of the latter, namely the variation of the surface roughness vertically along the component surface and the screening effect owing to the complex contours in the work piece geometry. Owing to its ability to perform machining and generate polished surface from a roughness value of Ra 1.2μ to 0.2 μ within 8 hours of processing, this new method offers greater scope in the surface modification of rough machined surfaces with complex geometry such as component with ducts and grooves. This research focus on investigating the effect of abrasive particle concentration on metal removal rate per unit area of the specimen surface. 3D surface morphology analysis investigates the quality of the polished surface and the study of circumferential uniformity and machining accuracy analysis on a complex-contoured component further investigate its scope and relevance in industrial applications.

scholarly journals Review of Superfinishing by the Magnetic Abrasive Finishing Process

2017 ◽  
Vol 3 (1) ◽  
Author(s):  
Lida Heng ◽  
Yon Jig Kim ◽  
Sang Don Mun
Keyword(s):  
High Surface ◽  
Processing Parameters ◽  
Engineering Industry ◽  
Advanced Materials ◽  
Surface Finishing ◽  
Magnetic Abrasive Finishing ◽  
Surface Finishes ◽  
Abrasive Finishing ◽  
Recent Developments ◽  
Finishing Processes

AbstractRecent developments in the engineering industry have created a demand for advanced materials with superior mechanical properties and high-quality surface finishes. Some of the conventional finishing methods such as lapping, grinding, honing, and polishing are now being replaced by non-conventional finishing processes. Magnetic Abrasive Finishing (MAF) is a non-conventional superfinishing process in which magnetic abrasive particles interact with a magnetic field in the finishing zone to remove materials to achieve very high surface finishing and deburring simultaneously. In this review paper, the working principles, processing parameters, and current limitations for the MAF process are examined via reviewing important work in the literature. Additionally, future developments of the MAF process are discussed.

Analysis on Kinematic Characteristics of Precision Balls Grinding

2012 ◽  
Vol 497 ◽  
pp. 20-24
Author(s):  
Yong Dai ◽  
Dong Hui Ding ◽  
Xu Xiao ◽  
Xue Shi Liu ◽  
Rui Jiang He ◽  
...  
Keyword(s):  
Numerical Analysis ◽  
Great Influence ◽  
Processing Parameters ◽  
Important Influence ◽  
Normal Movement ◽  
Motion State ◽  
Kinematic Characteristics ◽  
The Difference

In the process of grinding precision balls, the motion state of balls has an important influence on the efficiency and quality. However, the normal movement of balls will be damaged because of slipping, so it must be avoided. Besides, to process different materials of balls, it should use different processing parameters. This paper studies a numerical analysis on the kinematic characteristics of the motion of balls, analyzes processing parameters which impact the motion of balls during grinding and the difference of the motion state of bearing balls and resin balls. Study shows grinding pressure and plate speed have a great influence to the motion of balls during grinding.

Hybrid Metal 3D Printing for Selective Polished Surface

2021 ◽  
Vol 1027 ◽  
pp. 136-140
Author(s):  
Sze Yi Mak ◽  
Kwong Leong Tam ◽  
Ching Hang Bob Yung ◽  
Wing Fung Edmond Yau
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Surface Finishing ◽  
Polished Surface ◽  
Post Processing ◽  
One Stop ◽  
Metal 3D Printing ◽  
Critical Challenge ◽  
Metal Additive

Metal additive manufacturing has found broad applications in diverse disciplines. Post processing to homogenize and improve surface finishing remains a critical challenge to additive manufacturing. We propose a novel one-stop solution of adopting hybrid metal 3D printing to streamlining the additive manufacturing workflow as well as to improve surface roughness quality of selective interior surface of the printed parts. This work has great potential in medical and aerospace industries where complicated and high-precision additive manufacturing is anticipated.

scholarly journals Optimization of the Polishing Efficiency and Torque by Using Taguchi Method and ANOVA in Robotic Polishing

2020 ◽  
Vol 10 (3) ◽  
pp. 824
Author(s):  
Imran Mohsin ◽  
Kai He ◽  
Zheng Li ◽  
Feifei Zhang ◽  
Ruxu Du
Keyword(s):  
Surface Roughness ◽  
Taguchi Method ◽  
Signal To Noise Ratio ◽  
Surface Friction ◽  
Surface Finishing ◽  
Polished Surface ◽  
Machining Parameters ◽  
Regression Equations ◽  
Polishing Force ◽  
Polishing Efficiency

Surface finishing and polishing are important quality assurance processes in many manufacturing industries. A polished surface (low surface roughness) is linked with many useful properties other than providing an appealing gloss to the product, such as surface friction, electrical and chemical resistance, thermal conductivity, reflection, and product life. All these properties require an efficient polishing system working with the best machining parameters. This study analyzed the effects of the different input polishing parameters on the polishing efficiency and torque in the robotic polishing system for the circular-shaped workpieces (such as ring, cylinder, sphere, cone, etc.) by using the Taguchi method and analysis of variance (ANOVA). A customized rotatory passive gripper is designed to hold the watch bezel during polishing. Under the design of experiments (DOE) technique, Taguchi’s L 18 array is selected to find the optimized process parameters for polishing efficiency (based on surface roughness) and torque. Experimental results with the statistical analysis by signal-to-noise ratio and ANOVA (95% confidence level) confirms that the polishing force and tool speed are the most influencing parameter for polishing efficiency in the system. Linear regression equations are modeled for the polishing efficiency and torque. Finally, a confirmation test is conducted for the validation of the experimentation results against actual results.

Mechanical Properties and Microstructure of Self-Lubricating Ceramic Cutting Tool Materials

2004 ◽  
Vol 471-472 ◽  
pp. 221-224 ◽  
Author(s):  
Jian Xin Deng ◽  
Tong Kun Cao ◽  
Jia Lin Sun
Keyword(s):  
Mechanical Properties ◽  
Cutting Tool ◽  
Solid Lubricants ◽  
Polished Surface ◽  
Ceramic Tool ◽  
Tool Materials ◽  
Ceramic Cutting Tool ◽  
Micro Cracks ◽  
The Difference ◽  
Cutting Tool Materials

Al2O3/TiC ceramic tool materials with the addition of solid lubricants such as BN and CaF2 were produced by hot pressing. Effect of the solid lubricants on the microstructure and mechanical properties has been studied. Results showed that AlN phase resulted from the reaction of Al2O3 with BN was formed in Al2O3/TiC/BN composite after sintering. Significant micro-cracks resulted from the residual stress owing to the difference in the thermal expansion coefficient were found on the polished surface, and caused large mechanical properties degradation. While Al2O3/TiC/CaF2 composite showed higher flexural strength, fracture toughness, and hardness compared with that of Al2O3/TiC/BN composite owing its porosity absent and finer microstructure.

Role of Capillary and Thermocapillary Forces in Laser Polishing of Metals

2017 ◽  
Vol 139 (4) ◽  
Author(s):  
Chi Zhang ◽  
Jing Zhou ◽  
Hong Shen
Keyword(s):  
Capillary Force ◽  
Molten Pool ◽  
Continuous Wave ◽  
Flow Behavior ◽  
Marangoni Effect ◽  
Cost Effective ◽  
Underlying Mechanism ◽  
Thermocapillary Force ◽  
Laser Polishing ◽  
Coupled Heat Transfer

As one of emerging novel surface treatment techniques, laser polishing offers a cost-effective and efficient solution to reduce surface roughness of precision components at micro-/mesoscale. Although it has been applied for industrial and biomedical purposes, the underlying mechanism has not been fully revealed. This paper presents a study to understand the basic fundamentals of continuous wave fiber laser polishing of Ti6Al4V samples. A two-dimensional numerical model that coupled heat transfer and fluid flow is developed to illustrate the molten flow behavior. The roles of capillary and thermocapillary flow in the process of laser polishing are investigated to assist the understanding of the contributions of surface tension (capillary force) and Marangoni effect (thermocapillary force) in the polishing process. Capillary force dominates the molten pool at the initial stage of melting, while thermocapillary force becomes predominant when the molten pool fully develops.

Effect of gravity on the dynamics of non-isothermic ultra-thin two-layer films

2010 ◽  
Vol 661 ◽  
pp. 1-31 ◽  
Author(s):  
ALEXANDER NEPOMNYASHCHY ◽  
ILYA SIMANOVSKII
Keyword(s):  
Nonlinear Flow ◽  
Quiescent State ◽  
Horizontal Temperature Gradient ◽  
One Dimensional ◽  
Thermocapillary Flows ◽  
Wave Approximation ◽  
Long Wave ◽  
The Difference ◽  
Thermocapillary Forces ◽  
Long Wave Approximation

The effect of gravity on the dynamics of non-isothermic ultra-thin two-layer films is studied in this paper. The joint action of disjoining pressure and thermocapillary forces is taken into account. The problem is considered in a long-wave approximation. The linear stability of a quiescent state and thermocapillary flows is investigated. It has been found that the influence of the upper fluid density is significantly stronger than that of the difference of fluid densities. Nonlinear flow regimes are studied by means of numerical simulations. The gravity can lead to the formation of stripes or holes instead of droplets. The two-dimensional wavy patterns are replaced by one-dimensional waves with the fronts inclined or transverse to the direction of the horizontal temperature gradient.

Sign in / Sign up

Export Citation Format

Share Document