Discussion: Seismic performance of reinforced concrete ductile moment-resisting frame buildings located in different seismic regions

1993 ◽  
Vol 20 (2) ◽  
pp. 333-333 ◽  
Author(s):  
Franz Knoll
Keyword(s):  
Reinforced Concrete ◽  
Seismic Performance ◽  
Moment Resisting Frame ◽  
Frame Buildings ◽  
Moment Resisting ◽  
Seismic Regions

Seismic performance of reinforced concrete ductile moment-resisting frame buildings located in different seismic regions

1992 ◽  
Vol 19 (4) ◽  
pp. 688-710 ◽  
Author(s):  
T. J. Zhu ◽  
W. K. Tso ◽  
A. C. Heidebrecht
Keyword(s):  
Reinforced Concrete ◽  
Seismic Design ◽  
Ground Motions ◽  
Base Shear ◽  
High Rise ◽  
Moment Resisting Frame ◽  
Short Period ◽  
Frame Buildings ◽  
Moment Resisting ◽  
Seismic Regions

Seismic areas in Canada are classified into three categories for three different combinations of acceleration and velocity seismic zones (Za < Zv, Za = Zv, and Za > Zv), and ground motions in different zonal combination areas are expected to have different frequency characteristics. The National Building Code of Canada specifies different levels of seismic design base shear for short-period buildings located in areas with different zonal combinations. The specification of seismic design base shear for long-period buildings is directly tied to zonal velocity, irrespective of seismic zonal combination. This paper evaluates the seismic performance of both high-rise long-period and low rise short-period reinforced concrete ductile moment-resisting frame buildings located in seismic regions having Za < Zv, Za = Zv, and Za > Zv. Two frame buildings have 10 and 18 storeys were used as structural models for high-rise buildings, while a set of four-storey buildings were used to represent low-rise buildings. All buildings were designed to the current Canadian seismic provisions and concrete material code. Three groups of earthquake records were selected as representative ground motions in the three zonal combination regions. The inelastic responses of the designed buildings to the three groups of ground motions were analyzed statistically. The results indicate that the distribution of inelastic deformations is significantly different for high-rise frame buildings situated in seismic regions with Za < Zv, Za = Zv, and Za > Zv. Inelastic deformation is concentrated in the lower storeys for high-rise buildings located in Za < Zv areas, whereas significant inelastic deformation can develop in the upper storeys for high-rise buildings situated in Za > Zv regions. The use of three different levels of seismic design base shear for short-period structures improves the consistency of ductility demands on low-rise buildings situated in the three different zonal combination regions. Despite the use of appropriate design base shears for different seismic regions, the ductility demands for these low-rise buildings are relatively high. To avoid excessive ductility demands, it is suggested that the seismic strengths for low-rise short-period buildings should not be significantly reduced from their elastic design base shears. Key words: earthquake, ground motion, seismic, design, reinforced concrete, frame buildings, beams, columns, ductility.

Seismic performance of ductile medium height reinforced concrete frame buildings designed in accordance with the provisions of the 1995 National Building Code of Canada

1999 ◽  
Vol 26 (5) ◽  
pp. 606-617 ◽  
Author(s):  
A C Heidebrecht ◽  
N Naumoski
Keyword(s):  
Reinforced Concrete ◽  
Seismic Performance ◽  
Frame Structure ◽  
Performance Criteria ◽  
Building Code ◽  
Reinforced Concrete Frame ◽  
Concrete Frame ◽  
Moment Resisting Frame ◽  
Moment Resisting ◽  
Interstorey Drift

This paper describes an investigation into the seismic performance of a six-storey ductile moment-resisting frame structure located in Vancouver and designed and detailed in accordance with the seismic provisions of the National Building Code of Canada (1995). Both pushover and dynamic analyses are conducted using an inelastic model of the structure as designed and detailed. The structural performance of a number of design variations is evaluated using interstorey drift and member curvature ductility response as performance measures. All frames studied are expected to perform at an operational level when subjected to design level seismic excitations and to meet life safe performance criteria at excitations of twice the design level.Key words: seismic, building, frames, ductile, design, performance, reinforced concrete, code.

Sign in / Sign up

Export Citation Format

Share Document