Characterization of binder and mix properties to detect reclaimed asphalt pavement content in bituminous mixtures

2007 ◽  
Vol 34 (5) ◽  
pp. 581-588 ◽  
Author(s):  
J S Chen ◽  
P Y Chu ◽  
Y Y Lin ◽  
K Y Lin
Keyword(s):  
Energy Loss ◽  
Asphalt Pavement ◽  
Testing Procedure ◽  
Relative Energy ◽  
Engineering Properties ◽  
Reclaimed Asphalt Pavement ◽  
Recycled Asphalt ◽  
Reclaimed Asphalt ◽  
Bituminous Mixtures ◽  
Noticeable Increase

Abstract: The purpose of this study was to recommend a testing procedure to detect the content of reclaimed asphalt pavement (RAP) used in hot-mix asphalt mixtures. Asphalt was extracted from RAP for use in blending with new binder and aggregate. The recovered binders were blended with virgin asphalt (AC-10) at 10 different concentrations. A concept called relative energy loss was proposed to determine the engineering properties of recycled asphalt concrete (RAC). The relative energy loss was found to be directly related to the resistance of RAC to moisture-induced damage. A noticeable increase in relative energy loss with as much as 50% RAP was observed. At 20% RAP, there was not enough RAP to change binder or mixture properties. The predicted performance of mixtures containing up to 40% RAP by weight was shown to be similar to that of virgin material mixtures. A model was developed to estimate the RAP content in terms of penetration, viscosity, and relative energy loss. Key words: reclaimed asphalt pavement, relative energy loss, moisture sensitivity.

scholarly journals IMPACT OF RECYCLED ASPHALT PAVEMENT ON PROPERTIES OF FOAMED BITUMINOUS MIXTURES

2018 ◽  
Vol 13 (1) ◽  
pp. 14-22 ◽  
Author(s):  
Siksha Swaroopa KAR ◽  
Aravind Krishna SWAMY ◽  
Devesh TIWARI ◽  
Pramod Kumar JAIN
Keyword(s):  
Mechanical Response ◽  
Resilient Modulus ◽  
Asphalt Pavement ◽  
Performance Criteria ◽  
Reclaimed Asphalt Pavement ◽  
Recycled Asphalt ◽  
Aggregate Gradation ◽  
Reclaimed Asphalt ◽  
Bituminous Mixtures ◽  
Foamed Bitumen

In recent years, the use of foamed bitumen technology along with Reclaimed Asphalt Pavement is gaining popularity across the world. The mechanical response of foamed bitumen mixtures containing reclaimed asphalt pavement is significantly influenced by constituent material properties and aggregate gradation. This article presents results from a study where foamed bitumen mixtures conforming to Indian specifications were evaluated. For this purpose, foamed bitumen mixtures using a different percentage of reclaimed asphalt pavement and bitumens were prepared. Initially, the foaming characteristics of virgin bitumens were evaluated to optimize for optimum water content and foaming temperature. In the second stage, mixture design was conducted to optimize for foamed bitumen content in foamed bitumen mixtures containing a different percentage of reclaimed asphalt pavement. Finally, these foamed bitumen mixtures were evaluated for their mechanical properties. The results from this laboratory study indicated properties of foamed bitumen and foamed mixtures are significantly influenced by properties of bitumen, the quantity of bitumen, and reclaimed asphalt pavement. Among the different mixtures, a mixture containing 50% reclaimed asphalt pavement exhibited best results in resilient modulus and resistance to moisture damage tests. A mixture containing 80% reclaimed asphalt pavement also shows acceptable strength and resistance to water susceptibility. Thus, it is possible to design high-quality bituminous mixes using higher reclaimed asphalt pavement percentages, which meet the required volumetric and desired performance criteria.

scholarly journals The Influence of Reclaimed Asphalt Pavement on the Mechanical Performance of Bituminous Mixtures. An Analysis at the Mortar Scale

2020 ◽  
Vol 12 (20) ◽  
pp. 8343
Author(s):  
Ana E. Hidalgo ◽  
Fernando Moreno-Navarro ◽  
Raúl Tauste ◽  
M. Carmen Rubio-Gámez
Keyword(s):  
Mechanical Performance ◽  
Asphalt Pavement ◽  
Mechanical Analysis ◽  
Elastic Response ◽  
Reclaimed Asphalt Pavement ◽  
Reclaimed Asphalt ◽  
Bituminous Mixtures ◽  
Water Sensitivity ◽  
Term Performance

The main characteristics of bituminous mixtures manufactured with a considerable amount of reclaimed asphalt pavement (RAP), compared to conventional mixtures, are a reduction in workability, an increase in stiffness, and a loss of ductility, due to the presence of the aged bitumen contained in the RAP particles. To minimize these impacts, softer binders or rejuvenators are commonly used in the design of these mixtures in order to restore part of the ductility lost and to reduce the stiffness. In spite of previous investigations demonstrating that the mortar plays an essential role in the workability, long-term performance, and durability of bituminous mixtures (where cracking, cohesion, and adhesion problems all start at this scale), not many studies have assessed the impacts caused by the presence of RAP. In response to this, the present paper analyzes the workability, fatigue performance, and water sensitivity of bituminous mortars containing different amounts of RAP (from 0% to 100%) and rejuvenators. Mortar specimens were compacted using a gyratory compactor and studied via dynamic mechanical analysis under three point bending configuration. The results demonstrated that the presence of RAP reduces the workability and ductility of asphalt mortars. However, it also causes an increase in their stiffness, which induces a more elastic response and causes an increase in their resistance to fatigue, which could compensate for the loss of ductility. This aspect, together with the low water sensitivity shown, when using Portland cement as an active filler, would make it possible to produce asphalt materials with high RAP contents with a similar long-term mechanical performance as traditional ones. In addition, the use of rejuvenators was demonstrated to effectively correct the negative workability and ductility impacts caused by using RAP, without affecting the fatigue resistance and material adhesion/cohesion.

scholarly journals Quantitative Analysis of the Blending Degree of Virgin and RAP Binders in Recycled Asphalt Mixtures with a High RAP Content

2018 ◽  
Vol 8 (12) ◽  
pp. 2668 ◽  
Author(s):  
Zhen Yang ◽  
Guoyi Zhuang ◽  
Xiaoshu Wei ◽  
Jintao Wei ◽  
Huayang Yu ◽  
...  
Keyword(s):  
Asphalt Pavement ◽  
Asphalt Mixtures ◽  
Reclaimed Asphalt Pavement ◽  
Structural Index ◽  
Comprehensive Understanding ◽  
Recycled Asphalt ◽  
Reclaimed Asphalt ◽  
Standard Curve ◽  
Study Results ◽  
Mineral Additives

Recycled asphalt mixtures (RAM), which are prepared by blending reclaimed asphalt pavement (RAP), virgin bitumen and mineral additives, provide a variety of advantages, including resource recycling, reductions in costs, and reduced negative environmental impacts. However, multiple agencies have expressed concerns about the utilization ratio of RAP; thus, a comprehensive understanding of the blending degree of virgin and RAP binders in RAM would be significantly helpful for promoting the application of RAP. This study aims to quantitatively analyze the blending degree of virgin and RAP binders in RAM with high RAP contents. Carboxyl-terminated butadiene acrylonitrile (CTBN) was utilized as a tracer to mark the virgin bitumen; in addition, Fourier transform infrared (FTIR) spectroscopy was used to develop the structural index of CTBN (ICTBN). By establishing the standard curve between ICTBN and the CTBN content, the blending degree of virgin and RAP binders at different locations within RAM can be determined quantitatively. The study results indicate that the RAP binder was completely blended with the virgin bitumen in the outer RAP layer. However, the blending degree decreased with an increase in the RAP depth, and the blending degree in the inner RAP layer was only approximately half that which was found in the case of complete blending.

Laboratory investigation of engineering properties of rubberized asphalt mixtures containing reclaimed asphalt pavement

2010 ◽  
Vol 37 (11) ◽  
pp. 1414-1422 ◽  
Author(s):  
Feipeng Xiao ◽  
Serji Amirkhanian ◽  
Bradley Putman ◽  
Junan Shen
Keyword(s):  
Resilient Modulus ◽  
Asphalt Pavement ◽  
Crumb Rubber ◽  
Asphalt Mixtures ◽  
Engineering Properties ◽  
Reclaimed Asphalt Pavement ◽  
Reclaimed Asphalt ◽  
The Us ◽  
Rubberized Asphalt Concrete ◽  
Environmentally Sound

An improved understanding of the rheological and engineering properties of a rubberized asphalt concrete (RAC) pavement that contains reclaimed asphalt pavement (RAP) is important to stimulating the use of these recycled and by-product materials in asphalt mixtures. The uses of RAP and rubberized asphalt in the past have proven to be economical, environmentally sound, and effective in hot mix asphalt (HMA) mixtures across the US and the world. The objective of this research was to investigate the binder and mixture performance characteristics of these modified asphalt mixtures through a series of laboratory tests to evaluate properties such as the fatigue factor G*sinδ, rutting resistance, resilient modulus, and fatigue life. The results of the experiments indicated that the use of RAP and crumb rubber in HMA can effectively improve the engineering properties of these mixes.

scholarly journals Reuse of bituminous pavements: A mini-review of research, regulations and modelling

2016 ◽  
Vol 35 (4) ◽  
pp. 357-366 ◽  
Author(s):  
Joke Anthonissen ◽  
Wim Van den bergh ◽  
Johan Braet
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
End Of Life ◽  
Asphalt Pavement ◽  
Life Stage ◽  
Life Cycle Stage ◽  
Supplementary Information ◽  
Reclaimed Asphalt Pavement ◽  
Reclaimed Asphalt ◽  
Bituminous Mixtures

Bituminous pavement can be recycled – even multiple times – by reusing it in new bituminous mixtures. If the mechanical properties of the binder get worse, this reclaimed asphalt is often used in the sub-structure of the road. Apparently, up till now, no end-of-life phase exists for the material. Actually, defining the end-of-life and the end-of-waste stage of a material is important for life cycle assessment modelling. Various standards and scientific studies on modelling life cycle assessment are known, but the crucial stages are not yet defined for reclaimed asphalt pavement. Unlike for iron, steel and aluminium scrap, at this moment, no legislative end-of-waste criteria for aggregates are formulated by the European Commission. More research is necessary in order to develop valuable end-of-life criteria for aggregates. This contribution is a mini-review article of the current regulations, standards and studies concerning end-of-life and end-of-waste of reclaimed asphalt pavement. The existing methodology in order to define end-of-waste criteria, a case study on aggregates and the argumentation used in finished legislative criteria are the basis to clarify some modelling issues for reclaimed asphalt material. Hence, this contribution elucidates the assignment of process environmental impacts to a life cycle stage as defined by EN15804, that is, end-of-life stage (C) and the supplementary information Module D with benefits and loads beyond the system boundary.

Sign in / Sign up

Export Citation Format

Share Document