Impulse response evaluation of drilled shafts with pile caps: modeling and experiment

2004 ◽  
Vol 31 (2) ◽  
pp. 169-177 ◽  
Author(s):  
S C Baxter ◽  
M O Islam ◽  
S L Gassman
Keyword(s):  
Impulse Response ◽  
Three Dimensional ◽  
Structural Features ◽  
Drilled Shafts ◽  
Deep Foundations ◽  
Surface Reflection ◽  
Straightforward Method ◽  
Pile Cap ◽  
Pile Caps

Impulse response, a nondestructive surface reflection technique, offers a way to assess the quality and integrity of deep foundations. While the impulse response test is a straightforward method to implement, interpretation of the data is often difficult. The response of a shaft will be affected by construction conditions, accessibility and quality of the concrete, as well as by gross defects in geometry. As a result, test responses seldom resemble the ideal theoretical response. The difficulty is increased when the accessibility of the shaft is limited by the presence of a pile cap or other structures. This study progressively develops and builds two-dimensional (2-D) and three-dimensional (3-D) finite element models of experimentally tested shafts to identify key structural features that can be modeled and captured experimentally. For shafts with pile caps, the model helped confirm previous interpretations of the experimental data presented in this paper, identifying the shaft base, a defect, and the base of the pile cap.Key words: nondestructive testing, quality assessment, quality assurance, impulse response.

Simultaneous estimation of residual static and crossdip corrections

Geophysics ◽  
1979 ◽  
Vol 44 (7) ◽  
pp. 1175-1192 ◽  
Author(s):  
Kenneth L. Larner ◽  
Bruce R. Gibson ◽  
Ron Chambers ◽  
Ralph A. Wiggins
Keyword(s):  
Three Dimensional ◽  
Synthetic Data ◽  
Simultaneous Estimation ◽  
Broad Line ◽  
Near Surface ◽  
Seismic Surveys ◽  
Surface Reflection ◽  
Static Corrections ◽  
Solution Parameters

Seismic surveys on land are frequently conducted along nonlinear survey lines. Familiar examples include crooked lines controlled by existing road networks or by surface typography, lines that are otherwise linear but along which shotpoints occasionally must be offset laterally, and intentionally designed three‐dimensional (3-D) or broad‐line surveys. Departures from linear profiles introduce an element of complexity—crossdip—into the problem of estimating residual near‐surface reflection static time corrections (statics). Crossdip is the component of dip normal to the local profile direction. We have incorporated the effect of crossdip into the system of simultaneous equations that model residual static anomalies. The observed traveltimes of all reflections selected for analysis are represented as linear combinations of source and receiver static anomalies, structural shapes, residual normal moveouts, and crossdip terms. The static time components are taken to be surface‐consistent and independent of reflecting horizon, whereas the other solution parameters are subsurface‐consistent and pertain to specific horizons. Unfortunately, the inclusion of crossdip in the equations increases the degree of nonuniqueness of residual statics solutions. Its inclusion, however, is a necessity wherever horizons having differing crossdips are analyzed simultaneously. Such simultaneous analysis often is the best means for upgrading the reliability of the crosscorrelation estimates (i.e., the traveltime observations) upon which all statics are based. Synthetic‐data examples demonstrate the degree to which crossdip estimates and statics estimates can be separated from one another. Although estimates of crossdips are a useful by‐product, the accuracy of the static corrections is considered of prime importance. When critical crossdip terms are ignored in a statics solution, the quality of the common‐depthpoint (CDP) stacks suffer, as shown in comparison processings of field sections. Moreover, crossdip estimates from 3-D or broad‐line surveys are questionable if crossdip and static corrections are not considered in a unified solution.

Methods for making stereoslides and -prints, with freeze-etched olfactory epithelium as example

1984 ◽  
Vol 42 ◽  
pp. 704-705
Author(s):  
Bert Ph. M. Menco ◽  
Ido F. Menco ◽  
Frans L.T. Verdonk
Keyword(s):  
Electron Microscope ◽  
Olfactory Epithelium ◽  
Three Dimensional ◽  
Supporting Cell ◽  
Structural Features ◽  
Extensive Study ◽  
Sprague Dawley ◽  
Freezing Method ◽  
Respiratory Epithelia ◽  
Three Dimensional Presentation

Previously we presented an extensive study of the distributions of intramembranous particles of structures in apical surfaces of nasal olfactory and respiratory epithelia of the Sprague-Dawley rat. For the same structures these distributions were compared in samples which were i) chemically fixed and cryo-protected with glycerol before cryo-fixation, after excision, and ii)ultra-rapidly frozen by means of the slam-freezing method. Since a three-dimensional presentation markedly improves visualization of structural features micrographs were presented as stereopairs. Two exposures were made by tiling the sample stage of the electron microscope 6° in either direction with an eucentric goniometer. The negatives (Agfa Pan 25 Professional) were reversed with Kodak Technical Pan Film 2415 developed in D76 1:1. The prints were made from these reversed negatives. As an example tight-junctional features of an olfactory supporting cell in a region where this cell conjoined with two other cells are presented (Fig. 1).

Scanning Electron Microscopy in Hybrid Microelectronics

1976 ◽  
Vol 34 ◽  
pp. 456-457
Author(s):  
S. Khadpe ◽  
R. Faryniak
Keyword(s):  
Integrated Circuits ◽  
Thick Film ◽  
Integrated Circuit ◽  
Failure Modes ◽  
Three Dimensional ◽  
Circuit Components ◽  
Hybrid Microcircuit ◽  
Electrical Connections ◽  
Scanning Electron

The Scanning Electron Microscope (SEM) is an important tool in Thick Film Hybrid Microcircuits Manufacturing because of its large depth of focus and three dimensional capability. This paper discusses some of the important areas in which the SEM is used to monitor process control and component failure modes during the various stages of manufacture of a typical hybrid microcircuit.Figure 1 shows a thick film hybrid microcircuit used in a Motorola Paging Receiver. The circuit consists of thick film resistors and conductors screened and fired on a ceramic (aluminum oxide) substrate. Two integrated circuit dice are bonded to the conductors by means of conductive epoxy and electrical connections from each integrated circuit to the substrate are made by ultrasonically bonding 1 mil aluminum wires from the die pads to appropriate conductor pads on the substrate. In addition to the integrated circuits and the resistors, the circuit includes seven chip capacitors soldered onto the substrate. Some of the important considerations involved in the selection and reliability aspects of the hybrid circuit components are: (a) the quality of the substrate; (b) the surface structure of the thick film conductors; (c) the metallization characteristics of the integrated circuit; and (d) the quality of the wire bond interconnections.

Semi-automated methods for 3-D reconstruction of macromolecular complexes

1995 ◽  
Vol 53 ◽  
pp. 42-43
Author(s):  
B. Carragher ◽  
M. Whittaker
Keyword(s):  
Three Dimensional ◽  
Time Saving ◽  
Macromolecular Complexes ◽  
Symmetry Properties ◽  
Dimensional Reconstruction ◽  
Experienced Operator ◽  
Projection Images ◽  
The Individual ◽  
Natural Symmetry

Techniques for three-dimensional reconstruction of macromolecular complexes from electron micrographs have been successfully used for many years. These include methods which take advantage of the natural symmetry properties of the structure (for example helical or icosahedral) as well as those that use single axis or other tilting geometries to reconstruct from a set of projection images. These techniques have traditionally relied on a very experienced operator to manually perform the often numerous and time consuming steps required to obtain the final reconstruction. While the guidance and oversight of an experienced and critical operator will always be an essential component of these techniques, recent advances in computer technology, microprocessor controlled microscopes and the availability of high quality CCD cameras have provided the means to automate many of the individual steps.During the acquisition of data automation provides benefits not only in terms of convenience and time saving but also in circumstances where manual procedures limit the quality of the final reconstruction.

Towards Predicting Relative Belt Edge Endurance With the Finite Element Method

1990 ◽  
Vol 18 (4) ◽  
pp. 216-235 ◽  
Author(s):  
J. De Eskinazi ◽  
K. Ishihara ◽  
H. Volk ◽  
T. C. Warholic
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Three Dimensional ◽  
The Finite Element Method ◽  
Shear Deformations ◽  
Element Analysis ◽  
Vertical Loading ◽  
Predicted Values ◽  
Element Method

Abstract The paper describes the intention of the authors to determine whether it is possible to predict relative belt edge endurance for radial passenger car tires using the finite element method. Three groups of tires with different belt edge configurations were tested on a fleet test in an attempt to validate predictions from the finite element results. A two-dimensional, axisymmetric finite element analysis was first used to determine if the results from such an analysis, with emphasis on the shear deformations between the belts, could be used to predict a relative ranking for belt edge endurance. It is shown that such an analysis can lead to erroneous conclusions. A three-dimensional analysis in which tires are modeled under free rotation and static vertical loading was performed next. This approach resulted in an improvement in the quality of the correlations. The differences in the predicted values of various stress analysis parameters for the three belt edge configurations are studied and their implication on predicting belt edge endurance is discussed.

scholarly journals Agent-Based Modeling Demonstrates How Local Chemotactic Behavior Can Shape Biofilm Architecture

mSphere ◽  
2019 ◽  
Vol 4 (3) ◽  
Author(s):  
Emily G. Sweeney ◽  
Andrew Nishida ◽  
Alexandra Weston ◽  
Maria S. Bañuelos ◽  
Kristin Potter ◽  
...  
Keyword(s):  
Helicobacter Pylori ◽  
Three Dimensional ◽  
Structural Features ◽  
Agent Based Modeling ◽  
Emergent Properties ◽  
Cellular Interactions ◽  
Biofilm Growth ◽  
Content Type ◽  
Agent Based ◽  
H Pylori

ABSTRACTBacteria are often found living in aggregated multicellular communities known as biofilms. Biofilms are three-dimensional structures that confer distinct physical and biological properties to the collective of cells living within them. We used agent-based modeling to explore whether local cellular interactions were sufficient to give rise to global structural features of biofilms. Specifically, we asked whether chemorepulsion from a self-produced quorum-sensing molecule, autoinducer-2 (AI-2), was sufficient to recapitulate biofilm growth and cellular organization observed for biofilms ofHelicobacter pylori, a common bacterial resident of human stomachs. To carry out this modeling, we modified an existing platform, Individual-based Dynamics of Microbial Communities Simulator (iDynoMiCS), to incorporate three-dimensional chemotaxis, planktonic cells that could join or leave the biofilm structure, and cellular production of AI-2. We simulated biofilm growth of previously characterizedH. pyloristrains with various AI-2 production and sensing capacities. Using biologically plausible parameters, we were able to recapitulate both the variation in biofilm mass and cellular distributions observed with these strains. Specifically, the strains that were competent to chemotax away from AI-2 produced smaller and more heterogeneously spaced biofilms, whereas the AI-2 chemotaxis-defective strains produced larger and more homogeneously spaced biofilms. The model also provided new insights into the cellular demographics contributing to the biofilm patterning of each strain. Our analysis supports the idea that cellular interactions at small spatial and temporal scales are sufficient to give rise to larger-scale emergent properties of biofilms.IMPORTANCEMost bacteria exist in aggregated, three-dimensional structures called biofilms. Although biofilms play important ecological roles in natural and engineered settings, they can also pose societal problems, for example, when they grow in plumbing systems or on medical implants. Understanding the processes that promote the growth and disassembly of biofilms could lead to better strategies to manage these structures. We had previously shown thatHelicobacter pyloribacteria are repulsed by high concentrations of a self-produced molecule, AI-2, and thatH. pylorimutants deficient in AI-2 sensing form larger and more homogeneously spaced biofilms. Here, we used computer simulations of biofilm formation to show that localH. pyloribehavior of repulsion from high AI-2 could explain the overall architecture ofH. pyloribiofilms. Our findings demonstrate that it is possible to change global biofilm organization by manipulating local cell behaviors, which suggests that simple strategies targeting cells at local scales could be useful for controlling biofilms in industrial and medical settings.

Effect of post‐processing treatments on the quality of three‐dimensional printed rice starch constructs

2021 ◽  
Author(s):  
Radhika Theagarajan ◽  
Shubham Nimbkar ◽  
Jeyan Arthur Moses ◽  
Chinnaswamy Anandharamakrishnan
Keyword(s):  
Three Dimensional ◽  
Rice Starch ◽  
Post Processing

scholarly journals Porous Characteristics of Three-Dimensional Disordered Graphene Networks

Crystals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 127
Author(s):  
YongChao Wang ◽  
YinBo Zhu ◽  
HengAn Wu
Keyword(s):  
Pore Size ◽  
Low Temperatures ◽  
Gas Adsorption ◽  
Three Dimensional ◽  
Md Simulations ◽  
Structural Features ◽  
Atomic Scale ◽  
Critical Factors ◽  
Chlorination Process ◽  
Porous Morphology

The porous characteristics of disordered carbons are critical factors to their performance on hydrogen storage and electrochemical capacitors. Even though the porous information can be estimated indirectly by gas adsorption experiments, it is still hard to directly characterize the porous morphology considering the complex 3D connectivity. To this end, we construct full-atom disordered graphene networks (DGNs) by mimicking the chlorination process of carbide-derived carbons using annealing-MD simulations, which could model the structure of disordered carbons at the atomic scale. The porous characteristics, including pore volume, pore size distribution (PSD), and specific surface area (SSA), were then computed from the coordinates of carbon atoms. From the evolution of structural features, pores grow dramatically during the formation of polyaromatic fragments and sequent disordered framework. Then structure is further graphitized while the PSD shows little change. For the obtained DGNs, the porosity, pore size, and SSA increase with decreasing density. Furthermore, SSA tends to saturate in the low-density range. The DGNs annealed at low temperatures exhibit larger SSA than high-temperature DGNs because of the abundant free edges.

scholarly journals Three-Dimensional Structures of Carbohydrates and Where to Find Them

2020 ◽  
Vol 21 (20) ◽  
pp. 7702 ◽  
Author(s):  
Sofya I. Scherbinina ◽  
Philip V. Toukach
Keyword(s):  
Experimental Data ◽  
Molecular Modeling ◽  
Computational Methods ◽  
Three Dimensional ◽  
Structural Diversity ◽  
Structural Data ◽  
Structural Features ◽  
Data Validation ◽  
Data Generation ◽  
Efficient Treatment

Analysis and systematization of accumulated data on carbohydrate structural diversity is a subject of great interest for structural glycobiology. Despite being a challenging task, development of computational methods for efficient treatment and management of spatial (3D) structural features of carbohydrates breaks new ground in modern glycoscience. This review is dedicated to approaches of chemo- and glyco-informatics towards 3D structural data generation, deposition and processing in regard to carbohydrates and their derivatives. Databases, molecular modeling and experimental data validation services, and structure visualization facilities developed for last five years are reviewed.

Sign in / Sign up

Export Citation Format

Share Document