Large Holocene landslides from Pylon Peak, southwestern British Columbia

2004 ◽  
Vol 41 (2) ◽  
pp. 165-182 ◽  
Author(s):  
Pierre A Friele ◽  
John J Clague
Keyword(s):  
Population Density ◽  
Volcanic Rock ◽  
Debris Flows ◽  
Volcanic Rocks ◽  
Rock Avalanche ◽  
Volcanic Belt ◽  
Preliminary Evidence ◽  
Pyroclastic Rock ◽  
Wet Climate ◽  
Two Phases

Mount Meager massif, the northernmost volcano of the Cascade volcanic belt, has been the site of very large (>107 m3) landslides in the Holocene Epoch. We document two complex landslides at Pylon Peak, one of the peaks of the Mount Meager massif, about 7900 14C and 3900 14C years ago (about 8700 and 4400 calendar years ago). Together, the two landslides displaced ~ 6 × 108 m3 of volcanic rock from the south flank of Pylon Peak into nearby Meager Creek valley. Each landslide consisted of at least two phases, an early debris flow resulting from failure of hydrothermally altered pyroclastic rock at mid levels on the mountain and a later rock avalanche from a higher source. Both debris flows likely traveled down Meager Creek, and preliminary evidence from drilling indicates the 4400-year-old event traveled down Lillooet River into areas that are now settled and where population density is increasing rapidly. The mobility of the debris flows was due to the high content of fine, weathered volcanic sediment and the availability of sufficient water. The causes of the landslides are a wet climate and the presence of weak, hydrothermally altered volcanic rock containing abundant phreatic water on glacially oversteepened slopes. The landslides may have been triggered by earthquakes or by upwelling of magma to shallow depths within the volcano. However, they may also have occurred without specific triggers following extended periods of progressive weakening of the volcanic rocks.

scholarly journals Slope Failure in a Period of Increased Landslide Activity: Sennwald Rock Avalanche, Switzerland

Geosciences ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 331
Author(s):  
Selçuk Aksay ◽  
Susan Ivy-Ochs ◽  
Kristina Hippe ◽  
Lorenz Grämiger ◽  
Christof Vockenhuber
Keyword(s):  
Slope Failure ◽  
Rock Avalanche ◽  
Eastern Alps ◽  
Rock Failure ◽  
Rhine River ◽  
Stratigraphic Sequence ◽  
Exposure Age ◽  
Wet Climate ◽  
Cosmogenic Nuclide Dating ◽  
Additional Support

The Säntis nappe is a complex fold-and-thrust structure in eastern Switzerland, consisting of numerous tectonic discontinuities and a range of hillslopes prone to landsliding and large slope failures that modify the topography irreversibly. A slope failure, namely the Sennwald rock avalanche, occurred in the southeast wall of this fold-and-thrust structure due to the rock failure of Lower Cretaceous Helvetic limestones along the Rhine River valley. In this research, this palaeolandslide is examined in a multidisciplinary approach for the first time with detection and mapping of avalanche deposits, dynamic run-out modelling and cosmogenic nuclide dating. During the rock failure, the avalanche deposits were transported down the hillslope in a spreading-deck fashion, roughly preserving the original stratigraphic sequence. The distribution of landslide deposits and surface exposure age of the rock failure support the hypothesis that the landslide was a single catastrophic event. The 36Cl surface exposure age of avalanche deposits indicates an age of 4.3 ± 0.5 ka. This time coincides with a notably wet climate period, noted as a conditioning factor for landslides across the Alps in the mid-Holocene. The contemporaneity of our event at its location in the Eastern Alps provide additional support for the contention of increased regional seismic activity in mid-Holocene.

scholarly journals Reservoir characteristics in the Cretaceous volcanic rocks of Songliao Basin, China: A case of dynamics and evolution of the volcano-porosity and diagenesis

2018 ◽  
Vol 37 (2) ◽  
pp. 607-625 ◽  
Author(s):  
Haitao Sun ◽  
Dakang Zhong ◽  
Weijia Zhan
Keyword(s):  
Volcanic Rocks ◽  
Songliao Basin ◽  
Pyroclastic Rock ◽  
Rock Composition ◽  
Volcanic Tuff ◽  
Volcanic Breccia ◽  
Pore Evolution ◽  
Diagenetic Evolution ◽  
Pore Types ◽  
Volcanic Reservoirs

To explain the strong spatial heterogeneity of volcanic reservoirs porosity in the Songliao Basin and provide new ideas for predicting good volcanic reservoirs in other similar basins, the relationship between the pore evolution process and lithology of volcanic reservoirs has been described in this article. With the description and interpretation of core, thin section, scanning electron microscope, and the results of mercury injection experiment, this article clarifies the lithology, pore types, and pore structure features of the volcanic reservoirs in the Songliao Basin. The rocks of volcanic reservoirs in study area contain pyroclastic rock and volcanic lavas. The most common lithologies are rhyolite, volcanic breccia, and volcanic tuff. The pore size, morphology, and structure vary greatly between these three lithologies, the reason of which we think is the different volcanic eruption process as well as rock composition and its structure. The digenetic evolution of rhyolite includes gas dissipation of magmatic condensation; vesicles fulfilling by hydrothermal fluid; kaolinization and sericitization of feldspar phenocrysts; carbonation, devitrification, and recrystallization of felsic matrix; and finally, the dissolution of feldspar phenocrysts and felsic matrix. As for volcanic breccia, it usually go through the compaction, quartz and calcite filling the original pores between volcanic breccias, and dissolution of mineral debris together with tuff matrix. Similar with the rhyolite, volcanic tuff also undergoes the carbonation and kaolinization of felsic matrix, the dissolution of feldspar and felsic matrix, and compaction. Due to these comprehensive processes, a comprehensive analysis of volcanic rock lithology, which can indicate lithology distribution vertically and horizontally, is very necessary during volcanic reservoirs evaluation and prediction. These detailed analyses will help explorers to find potential reservoirs by distinguishing the diagenetic evolution and pore characteristic of volcanic reservoirs.

scholarly journals Urdu Translation and Adaptation of Brief COPE Scale

2020 ◽  
Vol 35 (1) ◽  
pp. 1-21
Author(s):  
Asma Nisa ◽  
Salma Siddiqui
Keyword(s):  
Coping Strategies ◽  
Depression Scale ◽  
Preliminary Evidence ◽  
World Health ◽  
World Health Organization Quality ◽  
Brief Cope ◽  
Quality Of Life Scale ◽  
Convergent And Divergent Validity ◽  
Two Phases ◽  
Health Organization

The phenomenon of coping has received remarkable recognition and instruments have been developed to survey diverse coping strategies. This study was aimed to translate, adapt, and validate Brief Coping Orientation of Problems Experienced (Brief COPE) inventory (Carver, 1997) in Urdu language by focusing on dispositional coping. The study includes two phases: Phase I comprised of translation and adaptation of Brief COPE in Urdu while in Phase II, psychometric analyses were carried out. The sample of 400 students (men = 200, women = 200) with age range between 19 to 25 years was taken from universities of Islamabad. The Brief COPE (Urdu), World Health Organization - Quality of Life Scale-Brief (Khan, Akhter, Ayub, Alam, & Naeem, 2003), and Aga Khan University Anxiety and Depression Scale (Ali, Reza, Khan, & Jehan, 1998) were administered. Factor analysis of Brief COPE yielded three factors namely, Problem Focused Coping, Avoidance Coping and Emotion Focused Coping that explained 33.66% of variance. The subscales demonstrated acceptable alpha reliability. Psychological distress correlated with avoidance and emotion focused coping; whereas problem focused coping correlated with better life satisfaction. Brief COPE demonstrated good preliminary evidence of internal consistency, convergent, and divergent validity for coping strategies, therefore, could be used in research and clinical settings in future in our culture.

scholarly journals Multivariate Analysis, Mass Balance Techniques, and Statistical Tests as Tools in Igneous Petrology: Application to the Sierra de las Cruces Volcanic Range (Mexican Volcanic Belt)

2014 ◽  
Vol 2014 ◽  
pp. 1-32 ◽  
Author(s):  
Fernando Velasco-Tapia
Keyword(s):  
Multivariate Analysis ◽  
Mass Balance ◽  
Magma Mixing ◽  
Statistical Tests ◽  
Tectonic Setting ◽  
Volcanic Rocks ◽  
Volcanic Belt ◽  
Cocos Plate ◽  
Igneous Petrology ◽  
Mexican Volcanic Belt

Magmatic processes have usually been identified and evaluated using qualitative or semiquantitative geochemical or isotopic tools based on a restricted number of variables. However, a more complete and quantitative view could be reached applying multivariate analysis, mass balance techniques, and statistical tests. As an example, in this work a statistical and quantitative scheme is applied to analyze the geochemical features for the Sierra de las Cruces (SC) volcanic range (Mexican Volcanic Belt). In this locality, the volcanic activity (3.7 to 0.5 Ma) was dominantly dacitic, but the presence of spheroidal andesitic enclaves and/or diverse disequilibrium features in majority of lavas confirms the operation of magma mixing/mingling. New discriminant-function-based multidimensional diagrams were used to discriminate tectonic setting. Statistical tests of discordancy and significance were applied to evaluate the influence of the subducting Cocos plate, which seems to be rather negligible for the SC magmas in relation to several major and trace elements. A cluster analysis following Ward’s linkage rule was carried out to classify the SC volcanic rocks geochemical groups. Finally, two mass-balance schemes were applied for the quantitative evaluation of the proportion of the end-member components (dacitic and andesitic magmas) in the comingled lavas (binary mixtures).

Density determinations of basic volcanic rocks of the Yellowknife supergroup by gravity measurements in mine shafts—Yellowknife, Northwest Territories

Geophysics ◽  
1980 ◽  
Vol 45 (1) ◽  
pp. 18-31 ◽  
Author(s):  
R. A. Gibb ◽  
M. D. Thomas
Keyword(s):  
Volcanic Rocks ◽  
Volcanic Belt ◽  
Mine Shaft ◽  
Average Interval ◽  
Basaltic Rocks ◽  
Surface Samples ◽  
Gravity Measurements ◽  
Vertical Density ◽  
Basic Volcanic

Gravity measurements were made in two gold mine shafts sunk in the Archean Yellowknife greenstone belt to determine the in‐situ densities of basic volcanic rocks of the Kam formation, Yellowknife supergroup. Thirteen stations were occupied between the surface and a depth of 608 m at an average interval of about 50 m in the C shaft of Giant Yellowknife Mines Limited, and 14 stations were occupied between the surface and a depth of 1598 m at an average interval of about 120 m in the Robertson shaft of Con mine, Cominco Limited. Densities were computed using the terminology of borehole gravimetry with appropriate corrections for surface terrain and underground voids such as shafts, drifts, and stopes. Weighted mean in‐situ densities of [Formula: see text] (36 to 608 m depth) and [Formula: see text] (surface to 1598 m depth) were obtained from the gravity measurements for the Giant and Robertson sections, respectively; these values compare with mean densities of 2.82 and [Formula: see text] obtained from rock samples collected at the underground gravity stations. Sheared specimens and massive specimens collected at both underground and surface gravity stations have mean densities of 2.80 and [Formula: see text], respectively. Unaltered surface samples collected at stratigraphic intervals of about 150 m throughout the entire volcanic sequence have a mean density of [Formula: see text]. Core samples obtained from holes drilled from the bottom of C shaft extend the vertical density profile for the Giant section from a depth of 608 to 1416 m; the mean density of these samples is [Formula: see text]. The lower bulk densities obtained from the mine shaft experiments reflect in part the high proportion of sheared rocks and in part the presence of lower‐density members of the Kam formation (andesite, dacite, tuff, breccia, and agglomerate) in the vicinity of the shafts, as opposed to purely massive basaltic rocks. A density of [Formula: see text] based on the proportion of low‐ and high‐density rocks in the volcanic belt is considered to be more representative of the Kam formation as a whole.

scholarly journals The Processes of Melt Differentiation in Arc Volcanic Rock: Insights from OIB-type Arc Magmas in the Central Mexican Volcanic Belt: Reply to a Critical Comment by Claus Siebe (2013)

2013 ◽  
Vol 54 (8) ◽  
pp. 1551-1554 ◽  
Author(s):  
S. M. Straub ◽  
A. Gomez-tuena ◽  
G. F. Zellmer ◽  
R. Espinasa-Perena ◽  
F. M. Stuart ◽  
...  
Keyword(s):  
Volcanic Rock ◽  
Volcanic Belt ◽  
Critical Comment ◽  
Arc Magmas ◽  
Mexican Volcanic Belt

Geochemistry and U/Pb geochronology of the Williams Brook area, Tobique-Chaleur zone, New Brunswick: stratigraphic and geotectonic setting of gold mineralization

2021 ◽  
Author(s):  
Dennis Sánchez-Mora ◽  
Christopher R.M. McFarlane ◽  
James A Walker ◽  
David R. Lentz
Keyword(s):  
New Brunswick ◽  
Gold Mineralization ◽  
Tectonic Setting ◽  
Volcanic Rocks ◽  
Crustal Contamination ◽  
Volcanic Belt ◽  
Temporal Variations ◽  
Lower Percentage ◽  
Oblique Convergence ◽  
Felsic Volcanic

Gold mineralization at Williams Brook in northern New Brunswick is hosted within the Siluro-Devonian, bimodal, volcano-sedimentary rocks of the Tobique-Chaleur Zone (Wapske Formation). Gold mineralization occurs in two styles: 1) as disseminations (refractory gold) in rhyolite, and 2) in cross-cutting quartz veins (free gold). Dating of the felsic volcanic host rocks by in situ LA-ICP-MS zircon U-Pb geochronology returned ages of 422 ± 3, 409 ± 2, 408 ± 3, 405 ± 2, 401 ± 9 Ma. Zr/Y of subvolcanic felsic intrusion (<8 for syn-mineralization and >8 for post-mineralization) suggests evolution from transitional to more alkalic affinities. Two mineralizing events are recognized; the first is a disseminated mineralization style formed at ~422–416 Ma and the second consists of quartz vein-hosted gold emplaced at 410–408 Ma. Felsic rocks from Williams Brook and elsewhere in the Tobique Group (i.e. Wapske, Costigan Mountain, and Benjamin formations), and the Coastal Volcanic Belt have similar Th/Nb ratios of ~0.1 to 1, reflecting similar levels of crustal contamination, and similar Nb and Y content, suggesting A-type affinities. These data indicate a similar environment of formation. Regionally, mafic rocks show similar within-plate continental signatures and an E-MORB mantle source that formed from partial melts of 10–30%. Mafic volcanic rocks from Williams Brook have a more alkaline affinity (based on Ti/V), and derivation from lower percentage partial melting (~5%). The chemical and temporal variations in the Williams Brook rocks suggest that they were erupted in an evolving transpressional tectonic setting during the oblique convergence of Gondwana and Laurentia.

scholarly journals Estimation of flow velocity for a debris flow via the two-phase fluid model

2015 ◽  
Vol 22 (1) ◽  
pp. 109-116 ◽  
Author(s):  
S. Guo ◽  
P. Xu ◽  
Z. Zheng ◽  
Y. Gao
Keyword(s):  
Debris Flow ◽  
Real World ◽  
Empirical Formula ◽  
Debris Flows ◽  
Fluid Model ◽  
Two Phase ◽  
Liquid Phases ◽  
Two Phases ◽  
Phase Fluid ◽  
Steady Velocity

Abstract. The two-phase fluid model is applied in this study to calculate the steady velocity of a debris flow along a channel bed. By using the momentum equations of the solid and liquid phases in the debris flow together with an empirical formula to describe the interaction between two phases, the steady velocities of the solid and liquid phases are obtained theoretically. The comparison of those velocities obtained by the proposed method with the observed velocities of two real-world debris flows shows that the proposed method can estimate the velocity for a debris flow.

Sign in / Sign up

Export Citation Format

Share Document