Nonlinear electroviscoelastic potential flow instability theory of two superposed streaming dielectric fluids

2014 ◽  
Vol 92 (10) ◽  
pp. 1249-1257 ◽  
Author(s):  
M.F. El-Sayed ◽  
N.T. Eldabe ◽  
M.H. Haroun ◽  
D.M. Mostafa
Keyword(s):  
Surface Tension ◽  
Electric Field ◽  
Potential Flow ◽  
Flow Instability ◽  
Three Dimensional ◽  
Three Dimensions ◽  
Physical Parameters ◽  
Two Dimensional ◽  
Dielectric Fluids ◽  
Fluid Velocities

The nonlinear electrohydrodynamic Kelvin–Helmholtz instability of two superposed viscoelastic Walters B′ dielectric fluids in the presence of a tangential electric field is investigated in three dimensions using the potential flow analysis. The method of multiple scales is used to obtain a dispersion relation for the linear problem, and a nonlinear Ginzburg–Landau equation with complex coefficients for the nonlinear problem. The linear and nonlinear stability conditions are obtained and discussed both analytically and numerically. In the linear stability analysis, we found that the fluid velocities and kinematic viscosities have destabilizing effects, and the electric field, kinematic viscoelasticities, and surface tension have stabilizing effects; and that the system in the three-dimensional disturbances is more stable than in the corresponding case of two-dimensional disturbances. While in the nonlinear analysis, for both two- and three-dimensional disturbances, we found that the fluid velocities, surface tension, and kinematic viscosities have destabilizing effects, and the electric field, kinematic viscoelasticities have stabilizing effects, and that the system in the three-dimensional disturbances is more unstable than its behavior in the two-dimensional disturbances for most physical parameters except the kinematic viscosities.

Mine Impact Burial Prediction From One to Three Dimensions

2008 ◽  
Vol 62 (1) ◽  
Author(s):  
Peter C. Chu
Keyword(s):  
Three Dimensional ◽  
Time History ◽  
Three Dimensions ◽  
Vertical Position ◽  
Burial Depth ◽  
Prediction Errors ◽  
Two Dimensional ◽  
Dimensional Model ◽  
One Dimensional ◽  
Dimensional Models

The Navy’s mine impact burial prediction model creates a time history of a cylindrical or a noncylindrical mine as it falls through air, water, and sediment. The output of the model is the predicted mine trajectory in air and water columns, burial depth/orientation in sediment, as well as height, area, and volume protruding. Model inputs consist of parameters of environment, mine characteristics, and initial release. This paper reviews near three decades’ effort on model development from one to three dimensions: (1) one-dimensional models predict the vertical position of the mine’s center of mass (COM) with the assumption of constant falling angle, (2) two-dimensional models predict the COM position in the (x,z) plane and the rotation around the y-axis, and (3) three-dimensional models predict the COM position in the (x,y,z) space and the rotation around the x-, y-, and z-axes. These models are verified using the data collected from mine impact burial experiments. The one-dimensional model only solves one momentum equation (in the z-direction). It cannot predict the mine trajectory and burial depth well. The two-dimensional model restricts the mine motion in the (x,z) plane (which requires motionless for the environmental fluids) and uses incorrect drag coefficients and inaccurate sediment dynamics. The prediction errors are large in the mine trajectory and burial depth prediction (six to ten times larger than the observed depth in sand bottom of the Monterey Bay). The three-dimensional model predicts the trajectory and burial depth relatively well for cylindrical, near-cylindrical mines, and operational mines such as Manta and Rockan mines.

Numerical study of electric field effects on the deformation of two-dimensional liquid drops in simple shear flow at arbitrary Reynolds number

2009 ◽  
Vol 626 ◽  
pp. 367-393 ◽  
Author(s):  
STEFAN MÄHLMANN ◽  
DEMETRIOS T. PAPAGEORGIOU
Keyword(s):  
Steady State ◽  
Shear Flow ◽  
Electric Field ◽  
Electric Fields ◽  
Simple Shear ◽  
Simple Shear Flow ◽  
Physical Parameters ◽  
Shear Stresses ◽  
Two Dimensional ◽  
Liquid Drops

The effect of an electric field on a periodic array of two-dimensional liquid drops suspended in simple shear flow is studied numerically. The shear is produced by moving the parallel walls of the channel containing the fluids at equal speeds but in opposite directions and an electric field is generated by imposing a constant voltage difference across the channel walls. The level set method is adapted to electrohydrodynamics problems that include a background flow in order to compute the effects of permittivity and conductivity differences between the two phases on the dynamics and drop configurations. The electric field introduces additional interfacial stresses at the drop interface and we perform extensive computations to assess the combined effects of electric fields, surface tension and inertia. Our computations for perfect dielectric systems indicate that the electric field increases the drop deformation to generate elongated drops at steady state, and at the same time alters the drop orientation by increasing alignment with the vertical, which is the direction of the underlying electric field. These phenomena are observed for a range of values of Reynolds and capillary numbers. Computations using the leaky dielectric model also indicate that for certain combinations of electric properties the drop can undergo enhanced alignment with the vertical or the horizontal, as compared to perfect dielectric systems. For cases of enhanced elongation and alignment with the vertical, the flow positions the droplets closer to the channel walls where they cause larger wall shear stresses. We also establish that a sufficiently strong electric field can be used to destabilize the flow in the sense that steady-state droplets that can exist in its absence for a set of physical parameters, become increasingly and indefinitely elongated until additional mechanisms can lead to rupture. It is suggested that electric fields can be used to enhance such phenomena.

Monkey superior colliculus represents rapid eye movements in a two-dimensional motor map

1993 ◽  
Vol 69 (3) ◽  
pp. 965-979 ◽  
Author(s):  
K. Hepp ◽  
A. J. Van Opstal ◽  
D. Straumann ◽  
B. J. Hess ◽  
V. Henn
Keyword(s):  
Eye Movements ◽  
Superior Colliculus ◽  
Degrees Of Freedom ◽  
Three Dimensional ◽  
Three Dimensions ◽  
Eye Position ◽  
Two Dimensional ◽  
Vestibular Nystagmus ◽  
Rapid Eye Movements ◽  
Q Model

1. Although the eye has three rotational degrees of freedom, eye positions, during fixations, saccades, and smooth pursuit, with the head stationary and upright, are constrained to a plane by ListingR's law. We investigated whether Listing's law for rapid eye movements is implemented at the level of the deeper layers of the superior colliculus (SC). 2. In three alert rhesus monkeys we tested whether the saccadic motor map of the SC is two dimensional, representing oculocentric target vectors (the vector or V-model), or three dimensional, representing the coordinates of the rotation of the eye from initial to final position (the quaternion or Q-model). 3. Monkeys made spontaneous saccadic eye movements both in the light and in the dark. They were also rotated about various axes to evoke quick phases of vestibular nystagmus, which have three degrees of freedom. Eye positions were measured in three dimensions with the magnetic search coil technique. 4. While the monkey made spontaneous eye movements, we electrically stimulated the deeper layers of the SC and elicited saccades from a wide range of initial positions. According to the Q-model, the torsional component of eye position after stimulation should be uniquely related to saccade onset position. However, stimulation at 110 sites induced no eye torsion, in line with the prediction of the V-model. 5. Activity of saccade-related burst neurons in the deeper layers of the SC was analyzed during rapid eye movements in three dimensions. No systematic eye-position dependence of the movement fields, as predicted by the Q-model, could be detected for these cells. Instead, the data fitted closely the predictions made by the V-model. 6. In two monkeys, both SC were reversibly inactivated by symmetrical bilateral injections of muscimol. The frequency of spontaneous saccades in the light decreased dramatically. Although the remaining spontaneous saccades were slow, Listing's law was still obeyed, both during fixations and saccadic gaze shifts. In the dark, vestibularly elicited fast phases of nystagmus could still be generated in three dimensions. Although the fastest quick phases of horizontal and vertical nystagmus were slower by about a factor of 1.5, those of torsional quick phases were unaffected. 7. On the basis of the electrical stimulation data and the properties revealed by the movement field analysis, we conclude that the collicular motor map is two dimensional. The reversible inactivation results suggest that the SC is not the site where three-dimensional fast phases of vestibular nystagmus are generated.(ABSTRACT TRUNCATED AT 400 WORDS)

Investigation of Three-Dimensional Flow in Microchannels With Patterned Surfaces

2007 ◽  
Author(s):  
Auro Ashish Saha ◽  
Sushanta K. Mitra
Keyword(s):  
Surface Tension ◽  
Flow Instability ◽  
Numerical Study ◽  
Three Dimensional ◽  
Surface Characteristics ◽  
Bottom Wall ◽  
Surface Tension Effect ◽  
Hydrophobic Region ◽  
Side Walls ◽  
Dimensional Simulation

A three-dimensional numerical simulation of flow in patterned microchannel with alternate layers of hydrophilic and hydrophobic surfaces at the bottom wall is studied here. Surface characteristics of the microchannel are accounted by specifying the contact angle and the surface tension of the fluid. Meniscus profiles with varying amplitude and shapes are obtained under the different specified surface conditions. Flow instability increases as the fluid at the bottom wall traverses alternately from hydrophilic region to hydrophobic region. To understand the surface tension effect of the side walls, a two-dimensional numerical study has also been carried out for the microchannel and the results are compared with three-dimensional simulation. The surface tension effect of the side walls enhances the capillary effect for three-dimensional case.

Electric-field-dependent absorption of ZnSe-based quantum wells: The transition from two-dimensional to three-dimensional behavior

1998 ◽  
Vol 58 (16) ◽  
pp. 10709-10720 ◽  
Author(s):  
D. Merbach ◽  
E. Schöll ◽  
W. Ebeling ◽  
P. Michler ◽  
J. Gutowski
Keyword(s):  
Electric Field ◽  
Quantum Wells ◽  
Three Dimensional ◽  
Two Dimensional ◽  
Field Dependent ◽  
Dependent Absorption

scholarly journals Design and Testing of Swept and Leaned Outlet Guide Vanes to Reduce Stator-Strut-Splitter Aerodynamic Flow Interactions

1998 ◽  
Author(s):  
A. R. Wadia ◽  
P. N. Szucs ◽  
K. L. Gundy-Burlet
Keyword(s):  
Dimensional Analysis ◽  
Test Performance ◽  
Potential Flow ◽  
Flow Analysis ◽  
Three Dimensional ◽  
Angle Distribution ◽  
Two Dimensional ◽  
Guide Vanes ◽  
Flow Interactions ◽  
Design And Testing

Large circumferential varying pressure levels produced by aerodynamic flow interactions between downstream stators and struts present a potential noise and stability margin liability in a compression component. These interactions are presently controlled by tailoring the camber and/or stagger angles of vanes neighboring the fan frame struts. This paper reports on the design and testing of a unique set of swept and leaned fan outlet guide vanes (OGVs) that do not require this local tailoring even though the OGVs are closely coupled with the fan frame struts and splitter to reduce engine length. The swept and leaned OGVs not only reduce core-duct diffusion, but they also reduce the potential flow interaction between the stator and the strut relative to that produced by conventional radial OGVs. First, the design of the outlet guide vanes using a single bladerow three-dimensional viscous flow analysis is outlined. Next, a two-dimensional potential flow analysis was used for the coupled OGV-frame system to obtain a circumferentially non-uniform stator stagger angle distribution to further reduce the upstream static pressure disturbance. Recognizing the limitations of the two-dimensional potential flow analysis for this highly three-dimensional set of leaned OGVs, as a final evaluation of the OGV-strut system design, a full three-dimensional viscous analysis of a periodic circumferential sector of the OGVs, including the fan frame struts and splitter, was performed. The computer model was derived from a NASA-developed code used in simulating the flow field for external aerodynamic applications with complex geometries. The three-dimensional coupled OGV-frame analysis included the uniformly-staggered OGVs configuration and the variably-staggered OGVs configuration determined by the two-dimensional potential flow analysis. Contrary to the two-dimensional calculations, the three-dimensional analysis revealed significant flow problems with the variably-staggered OGVs configuration and showed less upstream flow non-uniformity with the uniformly-staggered OGVs configuration. The flow redistribution in both the radial and tangential directions, captured fully only in the three-dimensional analysis, was identified as the prime contributor to the lower flow non-uniformity with the uniformly-staggered OGVs configuration. The coupled three-dimensional analysis was also used to validate the design at off-design conditions. Engine test performance and stability measurements with both uniformly- and variably-staggered OGVs configurations with and without the presence of inlet distortion confirmed the conclusions from the three-dimensional analysis.

Bringing Dynamic Geometry to Three Dimensions

2015 ◽  
pp. 68-99
Author(s):  
Nicholas H. Wasserman
Keyword(s):  
Teaching And Learning ◽  
Spatial Reasoning ◽  
Mathematics Classroom ◽  
Three Dimensional ◽  
Dynamic Geometry ◽  
State Standards ◽  
Three Dimensions ◽  
Two Dimensional ◽  
The Common ◽  
K 12

Contemporary technologies have impacted the teaching and learning of mathematics in significant ways, particularly through the incorporation of dynamic software and applets. Interactive geometry software such as Geometers Sketchpad (GSP) and GeoGebra has transformed students' ability to interact with the geometry of plane figures, helping visualize and verify conjectures. Similar to what GSP and GeoGebra have done for two-dimensional geometry in mathematics education, SketchUp™ has the potential to do for aspects of three-dimensional geometry. This chapter provides example cases, aligned with the Common Core State Standards in mathematics, for how the dynamic and unique features of SketchUp™ can be integrated into the K-12 mathematics classroom to support and aid students' spatial reasoning and knowledge of three-dimensional figures.

scholarly journals The magnetorotational instability prefers three dimensions

2020 ◽  
Vol 476 (2233) ◽  
pp. 20190622
Author(s):  
Jeffrey S. Oishi ◽  
Geoffrey M. Vasil ◽  
Morgan Baxter ◽  
Andrew Swan ◽  
Keaton J. Burns ◽  
...  
Keyword(s):  
Shear Rate ◽  
Angular Velocity ◽  
Laboratory Experiments ◽  
Three Dimensional ◽  
Linear Instability ◽  
Three Dimensions ◽  
Two Dimensional ◽  
Magnetorotational Instability ◽  
Dynamo Action ◽  
Wide Range

The magnetorotational instability (MRI) occurs when a weak magnetic field destabilizes a rotating, electrically conducting fluid with inwardly increasing angular velocity. The MRI is essential to astrophysical disc theory where the shear is typically Keplerian. Internal shear layers in stars may also be MRI-unstable, and they take a wide range of profiles, including near-critical. We show that the fastest growing modes of an ideal magnetofluid are three-dimensional provided the shear rate, S , is near the two-dimensional onset value, S c . For a Keplerian shear, three-dimensional modes are unstable above S  ≈ 0.10 S c , and dominate the two-dimensional modes until S  ≈ 2.05 S c . These three-dimensional modes dominate for shear profiles relevant to stars and at magnetic Prandtl numbers relevant to liquid-metal laboratory experiments. Significant numbers of rapidly growing three-dimensional modes remainy well past 2.05 S c . These finding are significant in three ways. First, weakly nonlinear theory suggests that the MRI saturates by pushing the shear rate to its critical value. This can happen for systems, such as stars and laboratory experiments, that can rearrange their angular velocity profiles. Second, the non-normal character and large transient growth of MRI modes should be important whenever three-dimensionality exists. Finally, three-dimensional growth suggests direct dynamo action driven from the linear instability.

scholarly journals On the Measure-Preserving Mappings with Three-Dimensions

1993 ◽  
Vol 132 ◽  
pp. 73-89
Author(s):  
Yi-Sui Sun
Keyword(s):  
Fixed Point ◽  
Invariant Manifolds ◽  
Three Dimensional ◽  
Invariant Curve ◽  
Three Dimensions ◽  
Two Dimensional ◽  
Kolmogorov Entropy ◽  
Numerical Exploration ◽  
Area Preserving ◽  
Dimensional Mapping

AbstractWe have systematically made the numerical exploration about the perturbation extension of area-preserving mappings to three-dimensional ones, in which the fixed points of area preserving are elliptic, parabolic or hyperbolic respectively. It has been observed that: (i) the invariant manifolds in the vicinity of the fixed point generally don’t exist (ii) when the invariant curve of original two-dimensional mapping exists the invariant tubes do also in the neighbourhood of the invariant curve (iii) for the perturbation extension of area-preserving mapping the invariant manifolds can only be generated in the subset of the invariant manifolds of original two-dimensional mapping, (iv) for the perturbation extension of area preserving mappings with hyperbolic or parabolic fixed point the ordered region near and far from the invariant curve will be destroyed by perturbation more easily than the other one, This is a result different from the case with the elliptic fixed point. In the latter the ordered region near invariant curve is solid. Some of the results have been demonstrated exactly.Finally we have discussed the Kolmogorov Entropy of the mappings and studied some applications.

An Intrinsically Three-Dimensional Fractal

2014 ◽  
Vol 24 (06) ◽  
pp. 1430017 ◽  
Author(s):  
M. Fernández-Guasti
Keyword(s):  
Bifurcation Diagram ◽  
Chaotic Behavior ◽  
Logistic Map ◽  
Three Dimensional ◽  
Periodic Points ◽  
Three Dimensions ◽  
Two Dimensional ◽  
Hyperbolic Numbers ◽  
Self Similar ◽  
One To One

The quadratic iteration is mapped using a nondistributive real scator algebra in three dimensions. The bound set S has a rich fractal-like boundary. Periodic points on the scalar axis are necessarily surrounded by off axis divergent magnitude points. There is a one-to-one correspondence of this set with the bifurcation diagram of the logistic map. The three-dimensional S set exhibits self-similar 3D copies of the elementary fractal along the negative scalar axis. These 3D copies correspond to the windows amid the chaotic behavior of the logistic map. Nonetheless, the two-dimensional projection becomes identical to the nonfractal quadratic iteration produced with hyperbolic numbers. Two- and three-dimensional renderings are presented to explore some of the features of this set.

Sign in / Sign up

Export Citation Format

Share Document