High ozone chemisorption by using metal–cluster complexes: a DFT study on the nickel-decorated B12P12 nanoclusters

2017 ◽  
Vol 95 (8) ◽  
pp. 845-850 ◽  
Author(s):  
Ali Shokuhi Rad
Keyword(s):  
Adsorption Energy ◽  
Electronic Structures ◽  
Density Functional ◽  
Metal Cluster ◽  
Bond Distance ◽  
Frontier Orbital ◽  
Functional Theory ◽  
The Density Functional Theory ◽  
Charge Analysis ◽  
Orbital Analysis

In the present study, by using first-principle study within the density functional theory (DFT), we investigated the ozone (O3) chemisorption on the surface of pristine and nickel-decorated B12P12 nanoclusters. The important emphasis of this study is to follow changes in the electronic structures of the aforementioned nanoclusters upon adsorption of the O3 molecule. Although we found strong chemisorption of O3 on a pristine nanocluster (–282.7 kJ/mol), significant increases in adsorption were found by modifying the nanocluster’s surface. Firstly, we found there are three possible sites on the surface of the nanocluster for nickel (Ni) decoration. For each Ni-decorated nanocluster, we searched its potential for adsorption of O3 by using quantum chemical calculations. Depending on the location of decorated Ni, we found considerable increased values of O3 adsorption energy (–340.8, –376.8, and –382.4 kJ/mol). We carried out calculations by taking into account the values of adsorption energy, bond distance, dipole moment study, charge analysis, frontier orbital analysis, and density of states of all relaxed systems.

scholarly journals Density functional theory insights into the bonding of CH3OH and CH3O with Ir(111) surface

2021 ◽  
Vol 24 (1) ◽  
Author(s):  
Thong Le Minh Pham ◽  
Khoa Thanh Phung ◽  
Thang Viet Ho ◽  
Thi Anh Le ◽  
An Thai Thi Nguyen
Keyword(s):  
Density Functional Theory ◽  
Adsorption Energy ◽  
Density Functional ◽  
Molecular Characteristics ◽  
Functional Theory ◽  
Adsorption Structure ◽  
The Density Functional Theory ◽  
Production Of Hydrogen ◽  
Charge Analysis ◽  
The Difference

Introduction: Understanding the adsorption characteristics of CH3OH and CH3O on the noble metal surfaces is essential for designing better catalysts for the on-board production of hydrogen from CH3OH. This study aims to provide insights into the adsorption behavior of these molecules on Ir(111) surface. Methods: The adsorption structure, the adsorption energy, and the bonding mechanism of CH3OH and CH3O with Ir(111) surface were investigated by means of the density functional theory (DFT) calculations and the Bader charge analysis. Results: The DFT results show that the adsorption of CH3OH and CH3O is driven by the formation of Ir–O bond at the top site of the surface by the overlap of O-2p and Ir-5d orbitals. The overlap of these orbitals is greater in the absorption of CH3O, resulting in stronger adsorption energy of CH3O (2.23 eV vs. 0.32 eV). In agreement with the adsorption strength, the charge transfer from CH3O to the surface is significantly larger than from CH3OH (0.386 e vs. 0.073 e). Conclusion: Although driven by the same adsorption bond, the difference in the molecular characteristics leads to a marked difference in the absorption strength of CH3OH and CH3O on Ir(111) surface.

Nickel-decorated B12P12 nanoclusters as a strong adsorbent for SO2 adsorption: Quantum chemical calculations

2017 ◽  
Vol 95 (10) ◽  
pp. 958-962 ◽  
Author(s):  
Ali Shokuhi Rad ◽  
Ali Mirabi ◽  
Majid Peyravi ◽  
Mahmoud Mirzaei
Keyword(s):  
Density Functional ◽  
Bond Distance ◽  
Functional Theory ◽  
Boron Phosphide ◽  
So2 Adsorption ◽  
Highly Sensitive ◽  
Charge Analysis ◽  
Sensitive Sensor ◽  
Modified Surface ◽  
Orbital Analysis

In this study, we have researched the interaction of SO2 molecule onto boron phosphide (B12P12) and Ni-decorated B12P12 nanoclusters using density functional theory (DFT). While SO2 has weak physisorption on the surface of pristine B12P12 (–7.4 kJ/mol), high chemisorption is found in the case of Ni-decorated B12P12 depending on the location of the Ni-decorated atom (–140.9, –167.7, and –166.5 kJ/mol). We found three major sites for appropriate decoration of Ni on the surface of a nanocluster, so we tried to find the maximum SO2 adsorption of this modified surface by taking into account the calculations of adsorption energy, bond distance, dipole moment study, charge analysis, frontier orbital analysis, and density of states of all relaxed systems. Our observations reveal that Ni-decorated B12P12 are highly sensitive for SO2 molecules, which is beneficial for design of sensitive sensor.

scholarly journals Heterofullerene MC59 (M = B, Si, Al) as Potential Carriers for Hydroxyurea Drug Delivery

Nanomaterials ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 115
Author(s):  
Peng Wang ◽  
Ge Yan ◽  
Xiaodong Zhu ◽  
Yingying Du ◽  
Da Chen ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Adsorption Energy ◽  
Electronic Structures ◽  
Density Functional ◽  
Density Functional Theory Calculations ◽  
Functional Theory ◽  
The Past ◽  
Charge Density Difference ◽  
The Density Functional Theory ◽  
Geometric And Electronic Properties

As a representative nanomaterial, C60 and its derivatives have drawn much attention in the field of drug delivery over the past years, due to their unique geometric and electronic structures. Herein, the interactions of hydroxyurea (HU) drug with the pristine C60 and heterofullerene MC59 (M = B, Si, Al) were investigated using the density functional theory calculations. The geometric and electronic properties in terms of adsorption configuration, adsorption energy, Hirshfeld charge, frontier molecular orbitals, and charge density difference are calculated. In contrast to pristine C60, it is found that HU molecule is chemisorbed on the BC59, SiC59, and AlC59 molecules with moderate adsorption energy and apparent charge transfer. Therefore, heterofullerene BC59, SiC59, and AlC59 are expected to be promising carriers for hydroxyurea drug delivery.

Electronic structure of the thermoelectric materials PbTe and AgPb18SbTe20 from first-principles calculations

2010 ◽  
Vol 25 (6) ◽  
pp. 1030-1036 ◽  
Author(s):  
Pengxian Lu ◽  
Zigang Shen ◽  
Xing Hu
Keyword(s):  
Band Structure ◽  
Thermoelectric Properties ◽  
First Principles ◽  
Electronic Structures ◽  
Density Functional ◽  
Partial Density ◽  
Functional Theory ◽  
The Density Functional Theory ◽  
Scanning Transmission ◽  
Linearized Augmented Plane Wave

To investigate the effects of substituting Ag and Sb for Pb on the thermoelectric properties of PbTe, the electronic structures of PbTe and AgPb18SbTe20 were calculated by using the linearized augmented plane wave based on the density-functional theory of the first principles. By comparing the differences in the band structure, the partial density of states (PDOS), the scanning transmission microscope, and the electron density difference for PbTe and AgPb18SbTe20, we explained the reason from the aspect of electronic structures why the thermoelectric properties of AgPb18SbTe20 could be improved significantly. Our results suggest that the excellent thermoelectric properties of AgPb18SbTe20 should be attributed in part to the narrowing of its band gap, band structure anisotropy, the much extrema and large DOS near Fermi energy, as well as the large effective mass of electrons. Moreover, the complex bonding behaviors for which the strong bonds and the weak bonds are coexisted, and the electrovalence and covalence of Pb–Te bond are mixed should also play an important role in the enhancement of the thermoelectric properties of the AgPb18SbTe20.

Density Functional Theory Studies of Electronic Structures and Hyperfine Interactions of Muonium in Imidazole

2015 ◽  
Vol 749 ◽  
pp. 134-138 ◽  
Author(s):  
Pek Lan Toh ◽  
Shukri Sulaiman ◽  
Mohamed Ismail Mohamed Ibrahim ◽  
Lee Sin Ang
Keyword(s):  
Density Functional Theory ◽  
Electronic Structures ◽  
Density Functional ◽  
Hyperfine Interactions ◽  
Geometry Optimization ◽  
Optimization Procedure ◽  
Functional Theory ◽  
The Density Functional Theory ◽  
Total Energies ◽  
Structure Calculations

We carried out ab initio electronic structure calculations in the frameworks of the Density Functional Theory (DFT) to study the electronic structures and hyperfine interaction of muonium (Mu) in imidazole (C3H4N2) and 1–methylimidazole (CH3C3H3N2). The local energy minima and hyperfine interactions of the Mu trapped at the three studies sites were determined by performing geometry optimization procedure. The results show the total energies for all three studied sites are close to one another. The Mu hyperfine interactions were also determined, with the corresponding values vary from 343.00 MHz to 471.28 MHz for the imidazole–Mu cluster, and from 380.21 MHz – 465.57 MHz to 475.93 MHz for the cluster of 1–methylimidazole–Mu, respectively.

Calculation of electronic structure and mechanical properties of DO3–Fe75-xSi25Nix intermetallic compounds by first principles

2015 ◽  
Vol 29 (13) ◽  
pp. 1550087
Author(s):  
R. Ma ◽  
M. P. Wan ◽  
J. Huang ◽  
Q. Xie
Keyword(s):  
Mechanical Properties ◽  
Intermetallic Compounds ◽  
First Principles ◽  
Electronic Structures ◽  
Density Functional ◽  
Elastic Parameters ◽  
Functional Theory ◽  
Ni Content ◽  
The Density Functional Theory ◽  
The Difference

Based on the density functional theory (DFT), the plane-wave pseudopotential method was used to investigate the electronic structures and mechanical properties of DO 3– Fe 75-x Si 25 Ni x(x = 0, 3.125, 6.25 and 9.375) intermetallic compounds. The elastic parameters were calculated, and then the bulk modulus, shear modulus and elastic modulus were derived. The paper then focuses on the discussion of ductility and plasticity. The results show that by adding appropriate Ni to Fe 3 Si intermetallic compound can improve the ductility. But the hardness will increase when the Ni content exceeds 6.25%. Analysis of density of states (DOS) and overlap populations indicates that with the difference of the strength of bonding and activity, there were some differences of ductility among different Ni contents. The Fe 71.875 Ni 3.125 Si 25 has the lowest hardness because the covalent bonding (Fe–Si bond and Si–Ni bond) has the minimum covalent electrons.

Density Functional Theory Calculations of Arsenic(III) Structures on Perfect TiO2 Anatase (1 0 1) Surface

2011 ◽  
Vol 233-235 ◽  
pp. 491-494 ◽  
Author(s):  
Lin Yu ◽  
Yue Liu ◽  
Zhi Gang Wei ◽  
Gui Qiang Diao ◽  
Ming Sun ◽  
...  
Keyword(s):  
Density Functional Theory ◽  
Adsorption Energy ◽  
Density Functional ◽  
Function Method ◽  
Photocatalytic Oxidation ◽  
Density Functional Theory Calculations ◽  
Functional Theory ◽  
Low Concentrations ◽  
The Density Functional Theory ◽  
The World

There are many areas in the world where the ground water has been contaminated by arsenic. One process to purify the water is to use TiO2 to adsorb the arsenic. As the TiO2 surface can be cleaned and reused, it has a promising potential as a water purifier. In this paper, the plane-wave function method, based on the density functional theory, has been used to calculate the structures of arsenic(III) on a perfect TiO2 anatase (1 0 1) surface. All the arsenic(III) solution species such as H3AsO3, H2AsO3-1, HAsO3-2 and AsO3-3 are put onto the surface with many different possible structures to obtain the adsorption energy. Based on the adsorption energy, the bidentate binuclear (BB) adsorption configurations of arsenic(III) on the surface are more favorable at low concentrations, whereas BB form and monodentate mononuclear (MM) form may coexist at higher concentrations. The models and results fit well with published experimental results. The results and conclusions will be of benefit to further research on arsenite adsorption and its photocatalytic oxidation on a TiO2 surface.

Density Functional Theory Calculations of Arsenic(V) Structures on Perfect TiO2 Anatase (1 0 1) Surface

2011 ◽  
Vol 233-235 ◽  
pp. 495-498 ◽  
Author(s):  
Zhi Gang Wei ◽  
Yan Di Zou ◽  
Hai Xia Zeng ◽  
Xue Chun Zhong ◽  
Zhen Jun Cheng ◽  
...  
Keyword(s):  
Density Functional Theory ◽  
Adsorption Energy ◽  
Density Functional ◽  
Function Method ◽  
Photocatalytic Oxidation ◽  
Density Functional Theory Calculations ◽  
Functional Theory ◽  
Low Concentrations ◽  
The Density Functional Theory ◽  
The World

There are many areas in the world where the ground water has been contaminated by arsenic. One process to purify the water is to use TiO2 to adsorb the arsenic. As the TiO2 surface can be cleaned and reused, it has a promising potential as a water purifier. In this paper, the plane-wave function method, based on the density functional theory, has been used to calculate the structures of arsenic(III) on a perfect TiO2 anatase (1 0 1) surface. All the arsenic(III) solution species such as H3AsO3, H2AsO3-1, HAsO3-2 and AsO3-3 are put onto the surface with many different possible structures to obtain the adsorption energy. Based on the adsorption energy, the bidentate binuclear (BB) adsorption configurations of arsenic(III) on the surface are more favorable at low concentrations, whereas BB form and monodentate mononuclear (MM) form may coexist at higher concentrations. The models and results fit well with published experimental results. The results and conclusions will be of benefit to further research on arsenite adsorption and its photocatalytic oxidation on a TiO2 surface.

Density functional theory study of acrolein adsorption on graphyne

2015 ◽  
Vol 93 (11) ◽  
pp. 1261-1265
Author(s):  
A.R. Karami
Keyword(s):  
Density Functional Theory ◽  
Electronic Properties ◽  
Adsorption Energy ◽  
Density Functional ◽  
Mulliken Charge ◽  
Density Functional Theory Study ◽  
Donor Molecule ◽  
Functional Theory ◽  
Charge Analysis ◽  
Semiconducting Property

We have used density functional theory to study the effect of acrolein adsorption on the electronic properties of graphyne. It is found that the acrolein molecule is physisorbed on graphyne sheets with small adsorption energy and large adsorption distance. Mulliken charge analysis indicates that charge is transferred from the acrolein molecule to the graphyne sheets. In the presence of this charge donor molecule, α- and β-graphyne with semimetallic properties and γ-graphyne with semiconducting property become n-type semiconductors. The sensitivity of the electronic properties of graphyne to the presence of acrolein indicates that graphyne sheets are appropriate materials to use as a sensor for acrolein detection.

First-principles study of the structural and elastic properties of Ti5Si3 with substitutions Zr, V, Nb, and Cr

2010 ◽  
Vol 25 (12) ◽  
pp. 2317-2324 ◽  
Author(s):  
Hui-Yuan Wang ◽  
Wen-Ping Si ◽  
Shi-Long Li ◽  
Nan Zhang ◽  
Qi-Chuan Jiang
Keyword(s):  
Density Functional Theory ◽  
Elastic Properties ◽  
First Principles ◽  
Electronic Structures ◽  
Density Functional ◽  
Elastic Moduli ◽  
Site Occupancy ◽  
Formation Enthalpy ◽  
Functional Theory ◽  
The Density Functional Theory

The formation enthalpy, electronic structures, and elastic moduli of the intermetallic compound Ti5Si3 with substitutions Zr, V, Nb, and Cr are investigated by using first-principles methods based on the density-functional theory. Our calculation shows that the site occupancy behaviors of alloying elements in Ti5Si3, determined by their atom radius, are consistent with the available experimental observations. Furthermore, using the Voigt–Reuss–Hill (VRH) approximation method, we obtained the bulk modulus B, shear modulus G, and the Young’s modulus E. Among these four substitutions, the V, Nb, and Cr substitutions can improve the ductility of Ti5Si3 effectively, while Zr substitution has little effect on the elastic properties of Ti5Si3. The elastic property variations of Ti5Si3 due to different substitutions are found to be correlated with the Me4d–Me4d antibonding and the strengthened Me4d–Si bonding in the solids.

Sign in / Sign up

Export Citation Format

Share Document