Evolution of thermal and mechanical properties of mine tailings and fly ash mixtures during curing period

2014 ◽  
Vol 51 (5) ◽  
pp. 570-582 ◽  
Author(s):  
Joon Kyu Lee ◽  
Julie Q. Shang
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Fly Ash ◽  
Mine Tailings ◽  
Mechanical Characteristics ◽  
Early Stage ◽  
Expansive Soils ◽  
Thermal And Mechanical Properties ◽  
Curing Period ◽  
Compaction Energy

Fly ash is often used as a binder for modifying the properties of geomaterials, such as organic and expansive soils, sludge from water treatment, dredged sediments, mine tailings, etc. Changes in thermal and mechanical properties of compacted mixtures of mine tailings and fly ash are studied over a curing period of 120 h. The study includes the measurement of thermal conductivity, temperature, unconfined compressive strength, and elastic modulus. Effects of the amount of fly ash added to mine tailings, molding water content, and compaction energy on these properties are investigated. Pore-size distribution and surface texture are analyzed to characterize the microstructures of fly ash treated–mine tailings. Relationships between the thermal conductivity and properties that capture packing and mechanical characteristics of mine tailings and fly ash mixtures are established. These observations provide enhanced understanding of thermal, mechanical, and structural properties of fly ash–treated mine tailings, which is associated with the hydration process at the early stage of the mixtures.

Effect of Fly Ash on Thermal and Mechanical Properties of Expanded Perlite Insulation Product

2012 ◽  
Vol 204-208 ◽  
pp. 4151-4155
Author(s):  
Zhan Bing Li ◽  
Xiu Wen Wu ◽  
Xiao Chao Chen
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Compressive Strength ◽  
Fly Ash ◽  
Moisture Content ◽  
National Standards ◽  
Dihydrogen Phosphate ◽  
Thermal And Mechanical Properties ◽  
Expanded Perlite ◽  
Mass Percentage

Expanded perlite insulation samples were prepared with expanded perlite as aggregate, aluminum dihydrogen phosphate as binder and fly ash as addition by mixing, molding, drying and calcination. The effects of fly ash mass percentage on the compressive strength, thermal conductivity, moisture content and density of the samples were studied. The results indicated that the combination properties of adding 10 % fly ash were the best among the all samples according to the national standards (GB/T10303-2001) No 350 Qualified of expanded perlite insulation products. Its compressive strength, thermal conductivity, moisture content and density were 0.456 Mpa, 0.08165 W/ (m K), 0.02 mass % and 259 kg/m3, respectively.

scholarly journals Flame-retardant MXene/Polyimide Film with Outstanding Thermal and Mechanical Properties Based on the Secondary Orientation Strategy

2021 ◽  
Author(s):  
Yue Zhu ◽  
Qingyu Peng ◽  
Haowen Zheng ◽  
Fuhua Xue ◽  
Pengyang Li ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Transition Metal ◽  
Mechanical Performance ◽  
Polyimide Film ◽  
Polymeric Films ◽  
Two Dimensional ◽  
Thermal And Mechanical Properties ◽  
Metal Carbides ◽  
Transition Metal Carbides

With the development of multifunction and miniaturization in modern electronics, polymeric films with strong mechanical performance and high thermal conductivity are urgently needed. Two-dimensional transition metal carbides and nitrides (MXenes)...

Influence of additive composition on thermal and mechanical properties of β–Si3N4 ceramics

2004 ◽  
Vol 19 (11) ◽  
pp. 3270-3278 ◽  
Author(s):  
Xinwen Zhu ◽  
Hiroyuki Hayashi ◽  
You Zhou ◽  
Kiyoshi Hirao
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Fracture Toughness ◽  
Nitrogen Pressure ◽  
High Fracture Toughness ◽  
Oxygen Impurity ◽  
Thermal And Mechanical Properties ◽  
High Fracture ◽  
Doped Materials ◽  
Gas Pressure Sintering

Dense β–Si3N4 ceramics were fabricated from α–Si3N4 raw powder by gas-pressure sintering at 1900 °C for 12 h under a nitrogen pressure of 1 MPa, using four different kinds of additive compositions: Yb2O3–MgO, Yb2O3–MgSiN2, Y2O3–MgO, and Y2O3–MgSiN2. The effects of additive composition on the microstructure and thermal and mechanical properties of β–Si3N4 ceramics were investigated. It was found that the replacement of Yb2O3 by Y2O3 has no significant effect on the thermal conductivity and fracture toughness, but the replacement of MgO by MgSiN2 leads to an increase in thermal conductivity from 97 to 113 Wm-1K-1and fracture toughness from 8 to 10 MPa m1/2, respectively. The enhanced thermal conductivity of the MgSiN2-doped materials is attributed to the purification of β–Si3N4 grain and increase of Si3N4–Si3N4 contiguity, resulting from the enhanced growth of large elongated grains. The improved fracture toughness of the MgSiN2-doped materials is attributed to the increase of grain size and fraction of large elongated grains. However, the same thermal conductivity between the Yb2O3- and Y2O3-doped materials is related to not only their similar microstructures, but also the similar abilities of removing oxygen impurity in Si3N4 lattice between Yb2O3 and Y2O3. The same fracture toughness between the Yb2O3- and Y2O3-doped materials is consistent with their similar microstructures. This work implies that MgSiN2 is an effective sintering aid for developing not only high thermal conductivity (>110 Wm−1K−1) but also high fracture toughness (>10 MPa m1/2) of Si3N4 ceramics.

scholarly journals Influence of the Direction of Mixture Compaction on the Selected Properties of a Hemp-Lime Composite

Materials ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4629
Author(s):  
Przemysław Brzyski ◽  
Piotr Gleń ◽  
Mateusz Gładecki ◽  
Monika Rumińska ◽  
Zbigniew Suchorab ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Temperature Distribution ◽  
Preparation Method ◽  
Thermal And Mechanical Properties ◽  
Compaction Process ◽  
External Wall ◽  
Capillary Uptake ◽  
Parallel Direction ◽  
The Individual

The aim of the research presented in the article was to check the differences in the hygro-thermal and mechanical properties of hemp-lime composites with different shives fractions, depending on the direction of mixture compaction. The research part of the paper presents the preparation method and investigation on the composites. Thermal conductivity, capillary uptake, as well as flexural and compressive strengths were examined. Additionally, an analysis of the temperature distribution in the external wall insulated with the tested composites was performed. The results confirm that the direction of compaction influences the individual properties of the composites in a similar way, depending on the size of the shives. The differences are more pronounced in the case of the composite containing longer fractions of shives. Both thermal conductivity of the material and the capillary uptake ability are lower in the parallel direction of the compaction process. Composites exhibit greater stiffness, but they fail faster with increasing loads when loaded in the direction perpendicular to compaction.

Epoxy/oil fly ash composites prepared throughin situpolymerization: Enhancement of thermal and mechanical properties

2014 ◽  
Vol 37 (2) ◽  
pp. 512-522 ◽  
Author(s):  
Shanmugam Nagendiran ◽  
Adel Badghaish ◽  
Ibnelwaleed A. Hussein ◽  
Abdelrahman Nasr Shuaib ◽  
Sarfaraz Ahmed Furquan ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Fly Ash ◽  
Thermal And Mechanical Properties ◽  
Oil Fly Ash

scholarly journals Strength Characteristics of High Strength Concrete (HSC) with and without Coarse Aggregate

2019 ◽  
Vol 9 (2) ◽  
pp. 4701-4704
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Fly Ash ◽  
Flexural Strength ◽  
Silica Fume ◽  
High Strength Concrete ◽  
Mechanical Characteristics ◽  
Coarse Aggregate ◽  
High Strength ◽  
Set Up

This paper aimed to investigate the mechanical characteristics of HSC of M60 concrete adding 25% of fly ash to cement and sand and percentage variations of silica fumes 0%,5% and 10% to cement with varying sizes of 10mm,6mm,2mm and powder of granite aggregate with w/c of 0.32. Specimens are tested for compressive strength using 10cm X 10cmX10cm cubes for 7,14,28 days flexural strength was determined by using 10cmX10cmX50cm beam specimens at 28 days and 15cm diameter and 30cm height cylinder specimens at 28 days using super plasticizers of conplast 430 as a water reducing agent. In this paper the experimental set up is made to study the mechanical properties of HSC with and without coarse aggregate with varying sizes as 10mm, 6mm, 2mm and powder. Similarly, the effect of silica fume on HSC by varying its percentages as 0%, 5% and 10% in the mix studied. For all mixes 25% extra fly ash has been added for cement and sand.

STUDYING THE EFFECT OF DIFFERENT ADDITIVES ON THE THERMAL CONDUCTIVITY AND MECHANICAL CHARACTERISTICS OF EPOXY-BASED COMPOSITE MATERIALS

2021 ◽  
Vol 25 (Special) ◽  
pp. 2-72-2-77
Author(s):  
Hassanein M. Nhoo ◽  
◽  
Raad. M. Fenjan ◽  
Ahmed A. Ayash ◽  
◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Particle Size ◽  
Tensile Strength ◽  
Mechanical Characteristics ◽  
Volume Fraction ◽  
Pyrolysis Process ◽  
Volume Percent ◽  
Fair Comparison ◽  
Filler Level

The current paper deals with investigating the effect of two different fillers on the thermal and mechanical characteristics of epoxy-based composite. The filler used throughout the study are: charcoal and Pyrex, both of them are different in nature and have not been investigated thoroughly or even compared fairly in terms of their effect on polymer matrix. Further, they can be considered as a cheap filler, charcoal can be obtained from a simple pyrolysis process of plants (charcoal) and Pyrex waste can be collected easily. Both types are added to the selected matrix with volume percent ranged from 10 to 60 with increments of 10. To ensure a fair comparison, the particle size is fixed (is about 1.7 micrometer). The results showed that the epoxy thermal conductivity has enhanced by about two orders of magnitudes over the studied range of filler. In terms of mechanical properties, the charcoal improves the tensile strength about 84% at 60% volume fraction while the Pyrex effect is about 40% at the same filler level. On the contrast, the results of compressive strength do not show an appreciable improvement overall. It decreases by about 12% at 60% volume fraction of charcoal while increases about the same percent with Pyrex at the same filler level.

scholarly journals Utilization of SiC and Cu Particles to Enhance Thermal and Mechanical Properties of Al Matrix Composites

Materials ◽  
2019 ◽  
Vol 12 (17) ◽  
pp. 2770 ◽  
Author(s):  
Dongxu Wu ◽  
Congliang Huang ◽  
Yukai Wang ◽  
Yi An ◽  
Chuwen Guo
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
High Thermal Conductivity ◽  
Low Density ◽  
Matrix Composites ◽  
Thermal And Mechanical Properties ◽  
Cu Content ◽  
Sic Particles ◽  
Al Matrix Composites ◽  
Al Matrix

In this work, SiC and Cu particles were utilized to enhance the thermal and mechanical properties of Al matrix composites. The ball-milling and cold-compact methods were applied to prepare Al matrix composites, and the uniform distribution of SiC and Cu particles in the composite confirms the validity of our preparation method. After characterizing the thermal conductivity and the compressibility of the prepared composites, results show that small particles have a higher potential to improve compressibility than large particles, which is attributed to the size effect of elastic modulus. The addition of SiC to the Al matrix will improve the compressibility behavior of Al matrix composites, and the compressibility can be enhanced by 100% when SiC content is increased from 0 to 30%. However, the addition of SiC particles has a negative effect on thermal conductivity because of the low thermal conductivity of SiC particles. The addition of Cu particles to Al-SiC MMCs could further slightly improve the compressibility behavior of Al-SiC/Cu MMCs, while the thermal conductivity could be enhanced by about 100% when the Cu content was increased from 0 to 30%. To meet the need for low density and high thermal conductivity in applications, it is more desirable to enhance the specific thermal conductivity by enlarging the preparation pressure and/or sintering temperature. This work is expected to supply some information for preparing Al matrix composites with low density but high thermal conductivity and high compressibility.

Identification and enhancement of the thermal and mechanical properties of two types of plasters successively derived from gypsum: from the Safi basin and the High Atlas of Marrakech, Morocco

2020 ◽  
Author(s):  
imane baba ◽  
Mounsif Ibnoussina ◽  
Omar Witam
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Mechanical Strength ◽  
Setting Time ◽  
Density Measurement ◽  
Raw Material ◽  
Mechanical And Thermal Properties ◽  
Thermal And Mechanical Properties ◽  
X Ray Diffraction ◽  
High Atlas

<p>Over the past few decades, the construction industry has focused on sustainable, environmentally friendly and easily recyclable materials. The objective of this work is to characterize and enhance the thermal conductivity, mechanical strength and setting time of a composite material based on plaster and lime. This material is designed for use in plasters.</p><p>Two types of gypsum are studied, the first one belongs to the Safi basin, the second one characterizes the High Atlas of Marrakech and precisely Douar Tafza. Geologically speaking, the two sites have many similarities. They are characterized by a Meso-Cenozoic age coverage covering a deformed Paleozoic age basement.</p><p>The characterization of the plaster's raw material, gypsum, was necessary to determine its physical and geotechnical properties, mineralogy, thermal behaviour and microscopic structure. Several analyses have been developed such as: pycnometer density measurement, X-ray diffraction, infrared spectroscopy and scanning electron microscopy.</p><p>We made samples, of standardized dimensions, of two mixtures based on the two types of plaster reinforced by the addition of two types of lime from different localities. The latter are from Marrakech and the Agadir region. The water/plaster mass ratio was set at 0.75 and the addition of lime was achieved by increasing its percentage in slices by 12.5% and up to 50%.</p><p>The reinforcement of plaster with lime has enhanced its thermal and mechanical properties and setting time. The measurements show that the addition of lime has reduced the thermal conductivity and increased the mechanical strength of both types of plaster. In addition, following the addition of lime, the setting time has decreased and the basicity of the material has increased. Noting that the intrinsic properties of the raw material influence the mechanical and thermal properties of the material.</p><p><strong>Keywords:</strong>   plaster, enhancement, properties, mechanical, thermal, Morocco</p>

Sign in / Sign up

Export Citation Format

Share Document