Inheritance of exine ornamentation and pollen shape in the interspecific tetraploid hybrids of Gloriosa

1986 ◽  
Vol 64 (12) ◽  
pp. 3134-3140 ◽  
Author(s):  
C. Ravi kumar ◽  
P. K. K. Nair
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Light Microscopy ◽  
Maternal Inheritance ◽  
Parental Species ◽  
Pollen Grains ◽  
The Other ◽  
Exine Ornamentation ◽  
Pollen Shape ◽  
Scanning Electron

Scanning electron microscopy and light microscopy of the pollen of three tetraploid (2n = 44) species, Gloriosa virescens Lindle, G. carsonii Baker, and G. richmondensis Hort., and three of their hybrids showed that the pollen in Gloriosa L. fundamentally consists of three pollen shape types, spheroidal, ellipsoidal, and spindle shaped, having monocolpate aperture and a striate exine ornamentation pattern. The three parental species can be differentiated from each other on the basis of pollen shape and their characteristic striate exine ornamentation. However, in all three hybrids the composition of pollen shape suggests maternal inheritance of the character. Furthermore, in each of the three hybrids, new exine ornamentation features have appeared which differ from those of the other hybrids and from their respective parents. All the pollen grains in each of the hybrids are uniform with the same characteristic exine ornamentation. They show no segregation of exine features into the parental categories, which would be expected if exine ornamentation was under sporophytic control. The potential of exine features as genetic markers in hybrids is discussed.

Pollen morphology of Sabinaria magnifica (Cryosophileae, Coryphoideae, Arecaceae)

Phytotaxa ◽  
2015 ◽  
Vol 207 (1) ◽  
pp. 135 ◽  
Author(s):  
Giovanni Raul Bogota ◽  
Carina Hoorn ◽  
Wim Star ◽  
Rob Langelaan ◽  
Hannah Banks ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Light Microscopy ◽  
Pollen Morphology ◽  
Pollen Grains ◽  
The Other ◽  
Transmission Electron ◽  
Palm Species ◽  
Scanning Electron

Sabinaria magnifica is so far the only known species in the recently discovered tropical palm genus Sabinaria (Arecaceae). Here we present a complete description of the pollen morphology of this palm species based on light microscopy (LM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). We also made SEM-based comparisons of Sabinaria with other genera within the tribe Cryosophileae. Pollen grains of Sabinaria magnifica resemble the other genera in the heteropolar, slightly asymmetric monads, and the monosulcate and tectate exine with perforate surface. Nevertheless, there are some clear differences with Thrinax, Chelyocarpus and Cryosophila in terms of aperture and exine. S. magnifica differs from its closest relative, Itaya amicorum, in the exine structure. This study shows that a combination of microscope techniques is essential for the identification of different genera within the Cryosophileae and may also be a necessary when working with other palynologically less distinct palm genera. 

scholarly journals Distinguishing Oblacinska sour cherry clones (Prunus cerasus L.) by pollen morphology

Genetika ◽  
2020 ◽  
Vol 52 (1) ◽  
pp. 187-198 ◽  
Author(s):  
Dragan Nikolic ◽  
Dragan Milatovic ◽  
Aleksandar Radovic ◽  
Jugoslav Trajkovic
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Pollen Morphology ◽  
Pollen Grains ◽  
Sour Cherry ◽  
Prunus Cerasus ◽  
Morphological Parameters ◽  
Exine Ornamentation ◽  
Pollen Shape ◽  
Scanning Electron

Morphology and ultrastructure of pollen grains were studied in 13 Obla?inska sour cherry clones in three years using scanning electron microscopy (SEM). All studied clones had isopolar, radially symmetric and tricolpate pollen grains. Length and width of pollen grains varied in a range of 50.03-55.97 ?m and 25.16-28.37 ?m respectively. Pollen shape in all the studied clones was identified as prolate. The smallest colpus length was found in the clone 8 (43.73 ?m), and the highest in the clone 3 (49.16 ?m). The highest colpus and mesocolpium width had the clone 3 (1.73 ?m; 14.87 ?m) and the lowest had the clone 7 (1.46 ?m; 13.78 ?m). All studied clones had striate exine ornamentation. Number of ridges per 100 ?m2 of the exine surface was the highest in the clone 11 (16.7) and lowest in the clone 2 (14.1). Ridge and furrow width ranged from 0.46 to 0.61 ?m and from 0.45 to 0.59 ?m, respectively. The clones have been classified into three clusters based on all studied properties. Pollen grains examination by SEM indicated that several morphological parameters (pollen size and exine characteristics) can be used to distinguish Obla?inska sour cherry clones.

scholarly journals Pollen Morphological Investigations of Salvia L. In Southeastern of Turkey and Its Taxonomic Implication

2021 ◽  
Vol 28 (2) ◽  
pp. 395-403
Author(s):  
Fatma Mungan Kiliç
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Light Microscopy ◽  
Pollen Morphology ◽  
Pollen Grains ◽  
Surface Sculpture ◽  
Plant Taxon ◽  
Pollen Shape ◽  
Micromorphological Characters ◽  
Scanning Electron

In this study, the pollen morphology and exine structure of nine species of the genus Salvia L. (Lamiaceae) were investigated using light microscopy and scanning electron microscopy (SEM). Six micromorphological characters (pollen shape, polar length, equatorial width, exine and intine thickness, colpus length and colpus width) of pollen grains of Salvia have been identified. The palynological observations revealed that pollen grains of most studied taxa of Salvia were suboblate shape and possess hekzacolpate aperture. Tectal surface sculpture was a good criterion to identify particular taxa from Salvia. The pollen of which is characterized by reticulate, the pollen ornamentation was similar in all studied taxa. Bangladesh J. Plant Taxon. 28(2): 395-403, 2021 (December)

scholarly journals Pollen morphology of the Balkan-Carpathian endemic Campanula lingulata Waldst. & Kit. (Campanulaceae)

2016 ◽  
pp. 75-82
Author(s):  
Marina Macukanovic-Jocic ◽  
Snezana Jaric
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Light Microscopy ◽  
Endemic Species ◽  
Pollen Morphology ◽  
Average Length ◽  
Pollen Grains ◽  
Polar Axis ◽  
First Time ◽  
Scanning Electron

Palynomorphological characteristics of Campanula lingulata, the Balkan-Carpathian endemic species growing in Serbia, have been investigated using light microscopy and scanning electron microscopy for the first time, in order to provide some information helpful for a better understanding of the taxonomic position of this species within the genus, as well as to contribute to the pollen atlas of Serbian apiflora. The pollen grains are radially symmetrical, isopolar, 3-zonoporate and medium-sized monads oblate-sphaeroidal in shape. Mean of the polar axis (P) is 27.6?1.9 ?m, while the average length of the equatorial axis (E) is 28.8?1.6 ?m. The apertures are operculate. The sculpturing pattern of the exine is microre?ticulate-microechinatae. The exine surface is covered with evenly distributed supratectal spinules of variable length and sparse granules. The longest supratectal spinules are 0.64?0.05 ?m in length and the smallest sculptural elements are less than 0.2 ?m high. The microechinae density per sample area of 5 ?m x 5 ?m averages 17.4?2.4.

Problems associated with ageing squid from their statoliths: towards a more structured approach

1994 ◽  
Vol 6 (2) ◽  
pp. 215-222 ◽  
Author(s):  
Marek R. Lipinski ◽  
M. Deon Durholtz
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Regression Analysis ◽  
Light Microscopy ◽  
The Other ◽  
Etching Solution ◽  
Significant Difference ◽  
Structured Approach ◽  
Fish Otoliths ◽  
Scanning Electron

It appears that squid statoliths cannot yet be regarded as accurate an ageing tool as fish otoliths. Statoliths from the same pair, prepared differently for viewing and counting increments, were compared. Increment counts do not imply age in days, because this was not validated. One statolith from each pair was examined by light microscopy (LM) after preparation following a new method. The other was viewed by Scanning Electron microscopy (SEM) with a modified etching solution. Shape of each statolith was similar when compared by multiple regression analysis (11 variables, n=53). There was a weak but significant difference between sexes (statoliths of females were slightly larger). All other differences were insignificant. Microscopic observation and increment counts of increments were successfully carried out for 37 pairs of statoliths. Significant differences between two independent counts were found for the LM method, but no significant differences were found between two independent SEM counts. Counts were significantly different when interpreted by both LM and SEM, probably because of poor resolution in the LM readings and over-resolution (growth layers prominent and numerous) in those read by SEM. Recommendations are made on how ageing studies, based on statoliths, should be structured and the results evaluated.

Silica deposition in the inflorescence bracts of wheat (Triticum aestivum). I. Scanning electron microscopy and light microscopy

1988 ◽  
Vol 66 (5) ◽  
pp. 829-838 ◽  
Author(s):  
M. J. Hodson ◽  
A. G. Sangster
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Triticum Aestivum ◽  
Light Microscopy ◽  
Triticum Aestivum L ◽  
The Other ◽  
Deposition Pattern ◽  
Membranous Structure ◽  
Silica Deposition ◽  
Scanning Electron

Silica deposition in the lower glume, lemma, and palea of wheat (Triticum aestivum L. cv. Highbury) was investigated using scanning electron microscopy and light microscopy. Silica was present in the outer walls of all the epidermal cells including prickles and papillae of the glume and lemma awns. The glume and the lemma were similar in epidermal silica deposition pattern, both having numerous silicified short trichomes and papillae on inner and outer surfaces. Epidermal long cells and short cells were also silicified. Macrohairs were restricted to isolated areas in these bracts, particularly on the inner surfaces just beneath the awns. The palea was a thin membranous structure differing markedly from the other two bracts. Most of the palea is pressed between the caryopsis and the next floret, and both surfaces are almost devoid of trichomes in these areas. However, at the apex and margins of the palea, macrohairs and papillae were abundant. The results are discussed with respect to possible taxonomic, anatomical, medical, and archaeological implications.

Morphological, cytological, palynological and molecular evidence on two new hybrids from Turkey: an example of homoploid hybridization in Origanum (Lamiaceae)

Phytotaxa ◽  
2018 ◽  
Vol 371 (3) ◽  
pp. 145 ◽  
Author(s):  
TUNCAY DİRMENCİ ◽  
TANER ÖZCAN ◽  
TÜRKER YAZICI ◽  
TURAN ARABACI ◽  
ESRA MARTİN
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Somatic Chromosome ◽  
Pollen Grains ◽  
Molecular Evidence ◽  
Hybrid Swarms ◽  
Pollen Characters ◽  
Exine Ornamentation ◽  
Nuclear Its ◽  
Scanning Electron

Two new hybrids of Origanum, O. ×malyeri and O. ×sevcaniae, are described and illustrated in detail. The general morphology, pollen and chromosome features, and nuclear (ITS) and chloroplast (rpl32) genomes of collected specimens were studied. Origanum ×malyeri is a hybrid between O. boissieri and O. vulgare subsp. hirtum and O. ×sevcaniae is another hybrid between O. vulgare subsp. hirtum and O. vogelii. These two new hybrids have some morphological intermediate characters between their parents. The pollen morphology of O. ×sevcaniae and its parents were studied and documented in detail using light microscopy (LM) and scanning electron microscopy (SEM). O. ×sevcaniae pollen is small to medium (P=18.49–21.03 µm, E=22.20–26.63 µm), suboblate (73%) to oblate (22%), the range of P/E ratio is from 0.73 to 0.85. Pollen grains are hexacolpate with granular membranes. Pollen grains were identified as bireticulate exine ornamentation with scanning electron microscopy examinations. The somatic chromosome number of O. boissieri, O. vulgare subsp. hirtum, O. vogelii, and O. ×sevcaniae were counted as 2n = 30. Pollen characters and somatic chromosome numbers of O. ×malyeri could not be examined because it has only female flowers and has not any nutlets. Also, according to molecular results, O. ×malyeri and O. ×sevcaniae have some polymorphic nucleotide regions in their nuclear ITS genomes and which means they have two different DNA dataset belonging to their parents. Also, some individuals of O. ×sevcaniae parents have single nucleotide polymorphism, too. These individuals live together with their hybrids and hybridization is probably a continuing process in that hybrid swarms. These present results support previous reports for the speciation of Origanum members via hybridization.

scholarly journals Spinnerets and silk-producing system of Segestria senoculata (Araneae, Araneomorphae, Segestriidae)

2016 ◽  
Vol 48 (3) ◽  
pp. 388 ◽  
Author(s):  
S. Karschová ◽  
J. Hajer
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Light Microscopy ◽  
Current Knowledge ◽  
The Other ◽  
Sem Study ◽  
First Time ◽  
Scanning Electron

The spinning apparatus and silk of <em>Segestria senoculata</em> were studied with the use of scanning electron microscopy and light microscopy, which confirmed the presence of four categories of spigots connected with four types of spinning glands (<em>i.e</em>., <em>Glandulae ampullaceae major, Glandulae ampullaceae minor, Glandulae piriformes and Glandulae pseudaciniformes</em>). New data about the morphology of spinnerets and spigots were obtained for both the adults and nymphal stages of both sexes. For the first time the silken threads of retreats, signal threads and attachment discs of the members of <em>Segestria</em> were subjected to a detailed SEM study. The data resulting from studying the spinning apparatus of <em>S. senoculata</em> was compared to current knowledge of the silk producing systems of families belonging to the Dysderoidea superfamily. Silks that are emitted from spigots in the course of retreat construction are not (similarly to the other dysderoids) processed by the spider’s legs during the subsequent process of hardening. Apart from the major ampullate glands/spigots, segestriids also possess developed minor ampullate glands. Minor ampullate threads are used by <em>S. senoculata</em> spiders when making their signal threads.

Pollen morphology of Lagotis (Scrophulariaceae)

1995 ◽  
Vol 73 (5) ◽  
pp. 701-709 ◽  
Author(s):  
Charles L. Argue
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Light Microscopy ◽  
Key Words ◽  
Pollen Morphology ◽  
Pollen Grains ◽  
As Species ◽  
Close Relationship ◽  
Scanning Electron

The pollen grains of 18 species of Lagotis have been examined using light microscopy and scanning electron microscopy of whole and fractured pollen. The grains are characterized by tricolporate apertures with smooth to sparsely granular ectocolpus membranes; lolongate endoapertures with unthickened margins included within the ectocolpi; relatively large exinous processes over the endoaperture; and columellate, semitectate, reticulate to microreticulate exines with or without supramurial processes. Lumina are reduced in size toward the colpus, but the transition is gradual, and a sharply bounded, differentially sculptured colpus border is absent. Lagotis pollen is distinct from that of the Selagineae and Globularia and indistinct from that of some Veroniceae; however, the characters shared with the latter are of wide occurrence in the Scrophulariaceae. Pollen morphology supports the distinction between L. brachystachya and L. stolonifera. It is consistent with the postulated close relationship between L. micrantha and L. integra, and provides no evidence to support the reestablishment of L. cashmeriana, L. minor, L. pallasii, or L. kunawurensis as species distinct from L. glauca. Key words: pollen morphology, Lagotis, Globularia, Selagineae, Veroniceae.

scholarly journals 24A study on pollen morphology of the family Oleaceae Hoffmanns. & Link in Vietnam

2021 ◽  
Vol 63 (9) ◽  
pp. 19-24
Author(s):  
Hong Quang Bui ◽  
◽  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Light Microscopy ◽  
Pollen Morphology ◽  
Pollen Grains ◽  
Morphological Features ◽  
Prolate Spheroidal ◽  
The Family ◽  
Scanning Electron ◽  
Sem Analyses

This paper uses scanning electron microscopy (SEM) analyses and light microscopy (LM) to study pollen grains of species of the family Oleaceae Hoffmanns. & Link distributed in Vietnam, including 23 species belonging to 6 genera of the family (Oleaceae). Pollen grains of all species (Oleaceae) in Vietnam are isopolar, radial, 3- prolate pollen grains small size, with two types: subprolate type (Jasminum and Olea) and prolate spheroidal type (Jasminum, Fraxinus, Ligustrum, Osmanthus, and Chengiodendron). The surface of the pollen grains in most species is reticulate. These are important morphological features to classify the Nhai family through pollen morphology

Sign in / Sign up

Export Citation Format

Share Document