The wavenumbers of NO2 stretching vibrations and transmission of substituent effects in 2- and 4-substituted 3-nitropyridine series

1985 ◽  
Vol 50 (11) ◽  
pp. 2443-2452 ◽  
Author(s):  
Alexander Perjéssy ◽  
Danuta Rasala ◽  
Piotr Tomasik ◽  
Ryszard Gawinecki
Keyword(s):  
Nitro Group ◽  
Substituent Effect ◽  
Substituent Effects ◽  
Correlation Equations ◽  
Stretching Vibration ◽  
Stretching Vibrations ◽  
Transmission Factors

The wavenumbers of both the symmetric and asymmetric stretching vibrations of the nitro group were measured in chloroform for the series of 2-X- and 4-X-substituted 3-nitropyridines as well as for o-X-substituted nitrobenzenes. The νas(NO2) and νs(NO2) values of both nitropyridine series were compared with those of corresponding nitrobenzenes. It has been found that the substituent effects in pyridines are transmitted to the 3-nitro group more readily from the 4-position, than from the 2-position. This transmission in 2-X-substituted 3-nitropyridines is comparable with that in the series of o-substituted benzene analogues. The transmission factors, γ, were determined according to Charton's definition for both 2,3- and 4,3-disubstituted pyridine rings. The separation of overall substituent effect into its inductive (field), resonance and steric components is discussed in terms of multiparameter correlation equations for wavenumber of asymmetric NO2 stretching vibration.

Infrared spectra and substituent effects in 2-(3-, and 4-substituted phenylmethylene)-1,3-cycloheptanediones

1983 ◽  
Vol 48 (2) ◽  
pp. 586-595 ◽  
Author(s):  
Alexander Perjéssy ◽  
Pavol Hrnčiar ◽  
Ján Šraga
Keyword(s):  
Substituent Effects ◽  
Phenyl Group ◽  
Wave Number ◽  
Vibrational Coupling ◽  
Wave Numbers ◽  
Stretching Vibration ◽  
Stretching Vibrations ◽  
The Relationship ◽  
Derivatives Of ◽  
Effect Of Structure

The wave numbers of the fundamental C=O and C=C stretching vibrations, as well as that of the first overtone of C=O stretching vibration of 2-(3-, and 4-substituted phenylmethylene)-1,3-cycloheptanediones and 1,3-cycloheptanedione were measured in tetrachloromethane and chloroform. The spectral data were correlated with σ+ constants of substituents attached to phenyl group and with wave number shifts of the C=O stretching vibration of substituted acetophenones. The slope of the linear dependence ν vs ν+ of the C=C stretching vibration of the ethylenic group was found to be more than two times higher than that of the analogous correlation of the C=O stretching vibration. Positive values of anharmonicity for asymmetric C=O stretching vibration can be considered as an evidence of the vibrational coupling in a cyclic 1,3-dicarbonyl system similarly, as with derivatives of 1,3-indanedione. The relationship between the wave numbers of the symmetric and asymmetric C=O stretching vibrations indicates that the effect of structure upon both vibrations is symmetric. The vibrational coupling in 1,3-cycloheptanediones and the application of Seth-Paul-Van-Duyse equation is discussed in relation to analogous results obtained for other cyclic 1,3-dicarbonyl compounds.

Preparation of 3-cyano-4-(R-vinyl)-5,5-dimethyl-Δ3-butenolides and substituent effects on their infrared spectra

1989 ◽  
Vol 54 (6) ◽  
pp. 1666-1674 ◽  
Author(s):  
Alexander Perjéssy ◽  
Aida Avetisovna Avetisyan ◽  
Anna Alexandrovna Aknazaryan ◽  
Gagik Surenovich Melikyan
Keyword(s):  
Infrared Spectra ◽  
Substituent Effects ◽  
Aromatic Aldehydes ◽  
The Other ◽  
Wave Numbers ◽  
Different Types ◽  
Group A ◽  
Stretching Vibrations ◽  
Transmission Factors ◽  
Statistical Results

Twenty nine 3-cyano-4-(R-vinyl)-5,5-dimethyl-Δ3-butenolides were prepared by condensation of 3-cyano-4,5,5-trimethyl-Δ3-butenolide with aliphatic and aromatic aldehydes. The wave numbers of C=O, C=N and C=C stretching vibrations of synthesized compounds were measured in trichloro- and tetrachloromethane. The spectral data were correlated with substituent conotants using Hammett-Brown and the improved and extended Seth-Paul-Van Duyse equation. The statistical results of correlations were compared with those of ethyl α-cyanocinnamates, ethyl benzoates and benzonitriles. The transmission factors for one and two C=C bonds were determined in the regions of π' = 0.46-0.57 and 0.27-0.37, respectively. In 3-cyano-4-(arylvinyl)-5,5-dimethyl-Δ3-butenolides a considerable conjugation exists between the arylvinyl moiety and both the C=O and C=N groups. On the other hand, in 3-cyano-4-(alkylvinyl)-5,5-dimethyl-Δ3-butenolides probably only the endocyclic C=C bond takes part in a marked resonance interaction with alkylvinyl group. A generally valid relationship was found between the slopes of ν(C=O) vs σ+ and ν(C=N) vs σ+ correlations for different types of compounds measured in CHCl3 and CCl4.

Substituent effect on wave numbers of C=O valence vibrations in ferrocene derivatives

1983 ◽  
Vol 48 (6) ◽  
pp. 1635-1646 ◽  
Author(s):  
Alexander Perjéssy ◽  
Štefan Toma
Keyword(s):  
Linear Correlation ◽  
Substituent Effect ◽  
Empirical Relation ◽  
Ferrocene Derivatives ◽  
Wave Numbers ◽  
Complex Structural ◽  
Transmission Factors

Wave numbers of C=O valence vibrations of 83 ferrocene derivatives have been measured in tetrachloromethane. For a series of 154 compounds containing ferrocene skeleton linear correlation has been found between wave numbers of C=O vibration and X+(R) constants of structural fragments in the sense of modified and extended Seth-Paul-Van Duyse equation. Validity has been verified of the recently derived empirical relation for calculation of the X+(R) constants of complex structural fragments from values of constants of substituents and transmission factors for simple structural groupings. The transmission factors γ and π' for 1,3- and 1,1'-ferrocene system have been found to be well applicable to calculation of constants of structural fragments containing ferrocene skeleton.

Chemometric Analysis of Substituent Effects. VIII. Alternative Interpretation of Substituent Effects (AISE)

1995 ◽  
Vol 60 (9) ◽  
pp. 1502-1528 ◽  
Author(s):  
Oldřich Pytela
Keyword(s):  
Multiple Bond ◽  
Substituent Effects ◽  
Alternative Interpretation ◽  
Class I ◽  
Reaction Centre ◽  
Correlation Equations ◽  
Class Iii ◽  
Substituent Constant ◽  
Chemical Models ◽  
The Individual

Alternative interpretation of substituent effects (AISE) starts from the presumption that a substituent only possesses a single property described by a single substituent constant. This property is transmitted to the reaction centre by three different ways depending on the interaction type in the triad reaction centre - basic skeleton - substituent. For interpretation it is substantial whether or not the substituent has p electrons at the atom adjacent to the basic skeleton. If it has none, the substituent belongs to class I and operates only by its basic effect described by the mentioned single substituent constant. Substituents of class II possess a free electron pair at the atom adjacent to the basic skeleton, and those of class III have a multiple bond between the first and the second atoms which is polarized in the direction from the basic skeleton. Substituent effects in class I are described by a substituent constant identical with σI constant. Substituents in classes II and III show additional effects proportional to the same constant. Hence, a separate treatment of substituent effects in the individual classes provides three straight lines intersecting in a common point. Mathematically, the description of substituent effects in this approach is expressed by a family of lines with a single explaining variable. The point of intersection, which is referred to as the iso-effect point, is not identical with the classic standard substituent - hydrogen - but is near to CN substituent. The approach given has the advantage of adopting a single substituent constant whose scale can be adjusted relatively precisely. Its drawback (like in the case of the correlation equations derived from the principle of separation of substituent effects) lies in a more extensive set of substituents needed for a correlation. The AISE principle has been applied to 318 series of experimental data describing effects of 32 substituents in a large variety of chemical models (aliphatic, alicyclic, aromatic, heteroaromatic, with or without direct conjugation between reaction centre and substituent) in both chemical reactions and equilibria. A comparison with two other correlation relations with two and three substituent constants for interpretation of substituent effects based on the principle of separation of the individual substituent effects showed that the closeness of AISE based correlations is comparable with that of the correlation equations currently used. It was somewhat less successful in the models with direct conjugation between reaction centre and substituent but the AISE principle can be used even in these cases.

Kinetic Study of Hydrolysis of Benzoates. Part XXVI. Variation of the Substituent Effect with Solvent in Alkaline Hydrolysis of Substituted Alkyl Benzoates

2006 ◽  
Vol 71 (11-12) ◽  
pp. 1557-1570 ◽  
Author(s):  
Vilve Nummert ◽  
Mare Piirsalu ◽  
Ilmar A. Koppel
Keyword(s):  
Kinetic Study ◽  
Alkaline Hydrolysis ◽  
Rate Constants ◽  
Substituent Effect ◽  
Substituent Effects ◽  
Alkyl Substituent ◽  
Solvent Parameters ◽  
Substituent Constants ◽  
Hydrolysis Of ◽  
Main Factor

The second-order rate constants k2 (dm3 mol-1 s-1) for the alkaline hydrolysis of substituted alkyl benzoates C6H5CO2R have been measured spectrophotometrically in aqueous 0.5 M Bu4NBr at 50 and 25 °C (R = CH3, CH2Cl, CH2CN, CH2C≡CH, CH2C6H5, CH2CH2Cl, CH2CH2OCH3, CH2CH3) and in aqueous 5.3 M NaClO4 at 25 °C (R = CH3, CH2Cl, CH2CN, CH2C≡CH). The dependence of the alkyl substituent effects on different solvent parameters was studied using the following equations:      ∆ log k = c0 + c1σI + c2EsB + c3∆E + c4∆Y + c5∆P + c6∆EσI + c7∆YσI + c8∆PσI     ∆ log k = c0 + c1σ* + c2EsB + c3∆E + c4∆Y + c5∆P + c6∆Eσ* + c7∆Yσ* + c8∆Pσ* .  ∆ log k = log kR - log kCH3. σI and σ* are the Taft inductive and polar substituent constants. E, Y and P are the solvent electrophilicity, polarity and polarizability parameters, respectively. In the data treatment ∆E = ES - EH2O , ∆Y = YS - YH2O , ∆P = PS - PH2O were used. The solvent electrophilicity, E, was found to be the main factor responsible for changes in alkyl substituent effects with medium. When σI constants were used, variation of the polar term of alkyl substituents with the solvent electrophilicity E was found to be similar to that observed earlier for meta and para substituents, but twice less when σ* constants were used. The steric term for alkyl substituents was approximately independent of the solvent parameters.

scholarly journals Distinguishing Features and Identification Criteria for K-Dioctahedral 1M Micas (Illite-Aluminoceladonite and Illite-Glauconite-Celadonite Series) from Middle-Infrared Spectroscopy Data

Minerals ◽  
2020 ◽  
Vol 10 (2) ◽  
pp. 153 ◽  
Author(s):  
Bella B. Zviagina ◽  
Victor A. Drits ◽  
Olga V. Dorzhieva
Keyword(s):  
Infrared Region ◽  
Spectroscopy Data ◽  
Unit Cell Parameters ◽  
Cation Composition ◽  
Cell Parameters ◽  
Sharp Maximum ◽  
Stretching Vibration ◽  
Stretching Vibrations ◽  
Middle Infrared ◽  
Distinguishing Features

A representative collection of K-dioctahedral 1M micas ranging in composition from (Mg, Fe)-poor illites to aluminoceladonites through Mg-rich illites (Fe-poor varieties) and from Fe-bearing, Mg-rich illites to celadonites through Fe-illites, Al-glauconites and glauconites (Fe-bearing varieties) was studied by Fourier-transform infrared (FTIR) spectroscopy in the middle-infrared region. Analysis and comparison of the relationships between the band positions and cation compositions of Fe-poor and Fe-bearing K-dioctahedral micas provided a generalized set of FTIR identification criteria that include the band positions and profiles in the regions of Si–O bending, Si–O stretching, and OH-stretching vibrations. FTIR data allow unambiguous identification of illites, aluminoceladonites, and celadonites, as well as distinction between Fe-illites and illites proper, as well as between Al-glauconites and glauconites. Specifically, a sharp maximum from the AlOHMg stretching vibration at ~3600 cm−1, the presence of a MgOHMg stretching vibration at 3583–3585 cm−1, as well as characteristic band positions in the Si–O bending (435–439, 468–472 and 509–520 cm−1) and stretching regions (985–1012 and 1090–1112 cm−1) are clearly indicative of aluminoceladonite. The distinction between Fe-illites and Al-glauconites, which have similar FTIR features, requires data on cation composition and unit-cell parameters.

Sign in / Sign up

Export Citation Format

Share Document