Scale-up of agitated crystallizers; Cooling batch crystallization of potassium aluminium sulphate

1982 ◽  
Vol 47 (4) ◽  
pp. 1189-1194 ◽  
Author(s):  
Jaroslav Nývlt ◽  
Piotr Karpiński ◽  
Stanislav Žáček ◽  
Miloslav Karel ◽  
Jerzy Budz ◽  
...  
Keyword(s):  
Experimental Error ◽  
Scale Up ◽  
Laboratory Scale ◽  
Small Scale ◽  
Sieve Analysis ◽  
Aluminium Sulphate ◽  
Derived Relations ◽  
Batch Crystallization ◽  
Mean Size ◽  
The Mean

The crystallization of potassium aluminium sulphate was conducted by cooling a solution saturated at 70°C to a temperature of 25°C at three various cooling rates. The measurements were performed on a small scale (160 cm3) and a large laboratory scale (0.021 m3). The mean size of product crystals was determined by sieve analysis, and the system constant, BN, was calculated using previously derived relations. The BN value is the same, within experimental error, for all the experiments and scales, indicating that agitated-vessel cooling crystallizers can be modelled successfully even on a very small laboratory scale.

Scale-up of stirred crystallisers. Batch precipitation of aluminium potassium sulphate

1982 ◽  
Vol 47 (11) ◽  
pp. 3027-3031 ◽  
Author(s):  
Piotr Karpiński ◽  
Stanislav Žáček ◽  
Jaroslav Nývlt ◽  
Jerzy Budz
Keyword(s):  
Size Distribution ◽  
Kinetic Constant ◽  
Scale Up ◽  
Potassium Sulphate ◽  
Aluminium Sulphate ◽  
Mixing Intensity ◽  
Mean Size ◽  
Relative Kinetic ◽  
Series Of Experiments ◽  
The Mean

Aluminium potassium sulphate has been precipitated batchwise by mixing equal volumes of 0.6 mol/l solutions of potassium sulphate and aluminium sulphate with eventual addition of water in advance. The experiments were performed at 20 and 25 °C in the volume 100 to 200 cm3 and in the volume 0.021 m3. From the size distribution of product crystals, the mean size of crystals has been evaluated and calculated the system kinetic constant of crystallization BN. The system constant is different in both series of experiments and can be correlated with the size of the crystallizer or with mixing intensity. Its value and the value of relative kinetic exponent g/n is comparable with the values obtained in experiments with cooling of solutions.

System constant and its significance in industrial crystallisation

1979 ◽  
Vol 44 (12) ◽  
pp. 3549-3554 ◽  
Author(s):  
Jaroslav Nývlt ◽  
Miroslav Broul
Keyword(s):  
Steady State ◽  
Nucleation Rate ◽  
Derived Relations ◽  
Specific Output ◽  
Simple Arrangement ◽  
Mean Size ◽  
General Derivation ◽  
The Mean ◽  
Fundamental Equations ◽  
Selection Of

Fundamental equations describing behaviour of the continuous stirred crystalliser in steady state include a system constant B, whose value strongly depends on selection of the size of initial crystals LN. To avoid this dependence and to see that the equations be applicable for crystalliser design also in the case when the value LN approaches zero, a general derivation of the dependence between the mean size of crystals L and specific output of the crystalliser mc has been derived on basis of the numerical nucleation rate. The derived relations do not include the quantity LN and they can be transformed by a simple arrangement to the published relations.

The Estimation of Blood Platelet Survival

1972 ◽  
Vol 28 (03) ◽  
pp. 447-456 ◽  
Author(s):  
E. A Murphy ◽  
M. E Francis ◽  
J. F Mustard
Keyword(s):  
Standard Deviation ◽  
Least Squares ◽  
Experimental Error ◽  
Blood Platelet ◽  
Least Squares Estimation ◽  
Systematic Relationship ◽  
Platelet Survival ◽  
The Mean ◽  
Normally Distributed

SummaryThe characteristics of experimental error in measurement of platelet radioactivity have been explored by blind replicate determinations on specimens taken on several days on each of three Walker hounds.Analysis suggests that it is not unreasonable to suppose that error for each sample is normally distributed ; and while there is evidence that the variance is heterogeneous, no systematic relationship has been discovered between the mean and the standard deviation of the determinations on individual samples. Thus, since it would be impracticable for investigators to do replicate determinations as a routine, no improvement over simple unweighted least squares estimation on untransformed data suggests itself.

Quantification of small-scale heterogeneity in aquatic aminopeptidase activity

2020 ◽  
Vol 84 ◽  
pp. 127-140
Author(s):  
BM Gaas ◽  
JW Ammerman
Keyword(s):  
Chlorophyll Fluorescence ◽  
Leucine Aminopeptidase ◽  
Hudson River ◽  
Aminopeptidase Activity ◽  
Small Scale ◽  
Analysis Instrument ◽  
Sequential Samples ◽  
Degree Of Confidence ◽  
The Mean ◽  
Hydrolysis Of

Leucine aminopeptidase (LAP) is one of the enzymes involved in the hydrolysis of peptides, and is sometimes used to indicate potential nitrogen limitation in microbes. Small-scale variability has the potential to confound interpretation of underlying patterns in LAP activity in time or space. An automated flow-injection analysis instrument was used to address the small-scale variability of LAP activity within contiguous regions of the Hudson River plume (New Jersey, USA). LAP activity had a coefficient of variation (CV) of ca. 0.5 with occasional values above 1.0. The mean CVs for other biological parameters—chlorophyll fluorescence and nitrate concentration—were similar, and were much lower for salinity. LAP activity changed by an average of 35 nmol l-1 h-1 at different salinities, and variations in LAP activity were higher crossing region boundaries than within a region. Differences in LAP activity were ±100 nmol l-1 h-1 between sequential samples spaced <10 m apart. Variogram analysis indicated an inherent spatial variability of 52 nmol l-1 h-1 throughout the study area. Large changes in LAP activity were often associated with small changes in salinity and chlorophyll fluorescence, and were sensitive to the sampling frequency. This study concludes that LAP measurements in a sample could realistically be expected to range from zero to twice the average, and changes between areas or times should be at least 2-fold to have some degree of confidence that apparent patterns (or lack thereof) in activity are real.

Batch Precipitation of Lead Iodide

1994 ◽  
Vol 59 (6) ◽  
pp. 1301-1304
Author(s):  
Jaroslav Nývlt ◽  
Stanislav Žáček
Keyword(s):  
Aqueous Solution ◽  
Particle Size ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Crystal Size ◽  
Lead Nitrate ◽  
Lead Iodide ◽  
Constant Rate ◽  
Mean Size ◽  
The Mean

Lead iodide was precipitated by a procedure in which an aqueous solution of potassium iodide at a concentration of 0.03, 0.10 or 0.20 mol l-1 was stirred while an aqueous solution of lead nitrate at one-half concentration was added at a constant rate. The mean size of the PbI2 crystals was determined by evaluating the particle size distribution, which was measured sedimentometrically. The dependence of the mean crystal size on the duration of the experiment exhibited a minimum for any of the concentrations applied. The reason for this is discussed.

Batch Crystallization with Crystals Attrition

1993 ◽  
Vol 58 (8) ◽  
pp. 1855-1860 ◽  
Author(s):  
Jaroslav Nývlt ◽  
Stanislav Žáček
Keyword(s):  
Mathematical Model ◽  
Calcium Sulfate ◽  
Crystal Size ◽  
Theoretical Description ◽  
Secondary Nucleation ◽  
Batch Crystallization ◽  
Batch Time ◽  
The Mean

The dependence of the mean crystal size of the products from batch crystallizers on the batch time occasionally exhibits a maximum, which can be explained by secondary nucleation due to the attrition of crystals. A kinetic equatation of nucleation, comprising a term for crystal attrition, can be used for the theoretical description of such behaviour. A mathematical model of a batch crystallizer with crystal attrition has been verified on the calcium sulfate precipitation.

scholarly journals Trends and Clinico-Epidemiological Features of Human Rabies Cases in Bangladesh, 2006–2018

2020 ◽  
Vol 41 (S1) ◽  
pp. s416-s416
Author(s):  
Sumon Ghosh ◽  
Md. Sohel Rana ◽  
Sukanta Chowdhury
Keyword(s):  
Effective Means ◽  
Scale Up ◽  
Traditional Healers ◽  
Human Rabies ◽  
Epidemiological Analysis ◽  
Increasing Trend ◽  
The Mean ◽  
Death Cases ◽  
Death Data

Background: Vaccinating dogs against rabies is an effective means of reducing human rabies. Methods: We analyzed 1,327 clinically diagnosed human rabies deaths and mass dog vaccination (MDV) data during 2006–2018 to quantify the impacts of MDV on human rabies incidence in Bangladesh and a subset of rabies death data (n = 422) for clinico-epidemiological analysis. Results: We found a positive and increasing trend of dog population vaccination (P = .01 and τ = 0.71) and a negative and declining trend (P < .001 and τ = −0.88) of human rabies cases (correlation coefficient, −0.82). Among 422 human rabies death cases, most victims (78%) sought treatment from traditional healers, and 12% received postexposure prophylaxis (PEP). The mean incubation period of rabies cases with exposure sites on the head and neck (35 days) was shorter than the upper limb (mean, 64 days; P = .02) and lower limb (mean, 89 days; P < .01). MDV is effective for reducing human rabies cases in Bangladesh. Conclusions: Creating awareness among the animal bite victims to stop relying on traditional healers rather seeking PEP, addressing the role of traditional healers through an awareness education program in respect to the treatment of dog bites, ensuring availability of PEP, and continuing to scale up MDV can help prevent human rabies deaths.Funding: NoneDisclosures: None

scholarly journals Quantification of Measurement and Model Effects in Monopile Foundation Scour Protection Experiments

2021 ◽  
Vol 9 (6) ◽  
pp. 585
Author(s):  
Minghao Wu ◽  
Leen De Vos ◽  
Carlos Emilio Arboleda Chavez ◽  
Vasiliki Stratigaki ◽  
Maximilian Streicher ◽  
...  
Keyword(s):  
Standard Deviation ◽  
Flow Field ◽  
Three Dimensional ◽  
Small Scale ◽  
Maximum Wave Height ◽  
Chaotic Flow ◽  
The Mean ◽  
Scour Protection ◽  
Damage Number ◽  
Measurement Effects

The present work introduces an analysis of the measurement and model effects that exist in monopile scour protection experiments with repeated small scale tests. The damage erosion is calculated using the three dimensional global damage number S3D and subarea damage number S3D,i. Results show that the standard deviation of the global damage number σ(S3D)=0.257 and is approximately 20% of the mean S3D, and the standard deviation of the subarea damage number σ(S3D,i)=0.42 which can be up to 33% of the mean S3D. The irreproducible maximum wave height, chaotic flow field and non-repeatable armour layer construction are regarded as the main reasons for the occurrence of strong model effects. The measurement effects are limited to σ(S3D)=0.039 and σ(S3D,i)=0.083, which are minor compared to the model effects.

scholarly journals Effects of topical gel formulation of Ficus carica latex on cutaneous leishmaniasis induced by Leishmania major in BALB/c mice

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Ali Pouryousef ◽  
Erfan Eslami ◽  
Sepehr Shahriarirad ◽  
Sina Zoghi ◽  
Mehdi Emami ◽  
...  
Keyword(s):  
Cutaneous Leishmaniasis ◽  
Murine Model ◽  
Leishmania Major ◽  
Considerable Effect ◽  
Ficus Carica ◽  
Control Group ◽  
Topical Gel ◽  
The Third ◽  
Mean Size ◽  
The Mean

Abstract Objectives The current study aimed to evaluate the effects of Ficus carica latex on the treatment of cutaneous leishmaniasis (CL), induced by Leishmania major. A 5% topical gel with F. carica latex was prepared. BALB/c mice were infected by inoculation of amastigotes form of L. major. Thirty BALB/c mice were divided into five groups, where the first group was treated daily, the second group twice per day, and the third group every other day with the 5% topical gel, for 3 weeks. The sizes of the lesions were measured before and during the course of treatment. Results Although the mean size of lesions in the mice group treated with the 5% F. carica gel, especially in the group receiving daily treatment, was less than the mean size of the lesions in the control group, yet, the differences was not statistically significant (p > 0.05). The findings of the current study demonstrated that the 5% F. carica latex with a 3-week course of treatment had no considerable effect in recovery or control of CL induced by L. major in the murine model. Using higher concentration of F. carica latex and with longer treatment lengths may increase its efficacy in the treatment of CL.

scholarly journals Mudrock Microstructure: A Technique for Distinguishing between Deep-Water Fine-Grained Sediments

Minerals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 653
Author(s):  
Shereef Bankole ◽  
Dorrik Stow ◽  
Zeinab Smillie ◽  
Jim Buckman ◽  
Helen Lever
Keyword(s):  
Grain Size ◽  
Deep Water ◽  
Sedimentary Facies ◽  
X Ray Diffraction ◽  
Weak Current ◽  
Large Area ◽  
Fine Grained ◽  
Mean Size ◽  
The Mean ◽  
Water Facies

Distinguishing among deep-water sedimentary facies has been a difficult task. This is possibly due to the process continuum in deep water, in which sediments occur in complex associations. The lack of definite sedimentological features among the different facies between hemipelagites and contourites presented a great challenge. In this study, we present detailed mudrock characteristics of the three main deep-water facies based on sedimentological characteristics, laser diffraction granulometry, high-resolution, large area scanning electron microscopy (SEM), and the synchrotron X-ray diffraction technique. Our results show that the deep-water microstructure is mainly process controlled, and that the controlling factor on their grain size is much more complex than previously envisaged. Retarding current velocity, as well as the lower carrying capacity of the current, has an impact on the mean size and sorting for the contourite and turbidite facies, whereas hemipelagite grain size is impacted by the natural heterogeneity of the system caused by bioturbation. Based on the microfabric analysis, there is a disparate pattern observed among the sedimentary facies; turbidites are generally bedding parallel due to strong currents resulting in shear flow, contourites are random to semi-random as they are impacted by a weak current, while hemipelagites are random to oblique since they are impacted by bioturbation.

Sign in / Sign up

Export Citation Format

Share Document