scholarly journals Oxidation of Linoleoyl Residue of Its Esters with Hydrophobic Substance

2009 ◽  
Vol 10 (3) ◽  
pp. 177-180
Author(s):  
Yasumasa MINEMOTO ◽  
Akio TAKEDA ◽  
Hiroto SAITO ◽  
Makoto YOSHIDA ◽  
Eiji NAKAJIMA ◽  
...  
Keyword(s):  
Hydrophobic Substance

γ-Cyclodextrin-BSA for Nano-Encapsulation of Hydrophobic Substance

2021 ◽  
pp. 101009
Author(s):  
Wen Hedi ◽  
Liu Jingbo ◽  
Yu Yiding ◽  
Sun Yuxi ◽  
Liu Jiyun ◽  
...  
Keyword(s):  
Hydrophobic Substance

scholarly journals The Auxiliary Effect of Copper Ions on the Depressant Effect of Sodium Thioglycolate in Chalcopyrite Flotation

Minerals ◽  
2020 ◽  
Vol 10 (2) ◽  
pp. 157
Author(s):  
Chonghui Zhang ◽  
Tingshu He ◽  
Wei Chen ◽  
Xianzhong Bu ◽  
Sen Wang ◽  
...  
Keyword(s):  
Zeta Potential ◽  
Photoelectron Spectroscopy ◽  
Active Sites ◽  
Copper Ions ◽  
Depressant Effect ◽  
X Ray ◽  
Adsorption Sites ◽  
Effect Of Copper ◽  
Adsorption Layers ◽  
Hydrophobic Substance

Sodium thioglycolate is a chalcopyrite depressant, but its depressant effect is weak. The paper investigated the effect of CuSO4 on the depressant performance of sodium thioglycolate towards chalcopyrite through flotation tests, Zeta potential measurements, X-ray photoelectron spectroscopy (XPS) analyses and Fourier-transform infrared (FTIR) spectra measurements. It was found that copper ions could improve the depressant effect of sodium thioglycolate on chalcopyrite. The results showed that copper ions could adsorb on the surface of chalcopyrite and form mixed copper sulfide and cupric oxides/hydroxides adsorption layers. As a result, the mineral composition on the chalcopyrite surface was changed. With sodium thioglycolate treatment, the Zeta potential and the adsorption sites of chalcopyrite surface were both increased, and the hydrophobic substance Sn2−/S0 concentration was decreased. The electrostatic repulsion of chalcopyrite surface with sodium thioglycolate was also decreased, which made the sodium thioglycolate interact with chalcopyrite more easily. The more active sites could adsorb more sodium thioglycolate, which improved the hydrophilia of chalcopyrite. At the same time, the decrease of Sn2−/S0 concentration could further improve the hydrophilia of chalcopyrite. The results show that the copper ions could exhibit auxiliary effect with sodium thioglycolate and could further enhance the depressant effect of sodium thioglycolate on the chalcopyrite flotation. This paper provides new insights into the depression of chalcopyrite flotation by sodium thioglycolate.

scholarly journals Antibacterial and hemolytic activities of linenscin OC2, a hydrophobic substance produced by Brevibacterium linens OC2

2006 ◽  
Vol 153 (2) ◽  
pp. 295-301 ◽  
Author(s):  
Catherine Boucabeille ◽  
Dominique Mengin-Lecreulx ◽  
Gilles Henckes ◽  
Jean-Marc Simonet ◽  
Jean Heijenoort
Keyword(s):  
Brevibacterium Linens ◽  
Hydrophobic Substance

scholarly journals Evaluation of Drug-Loading Ability of Poly(Lactic Acid)/Hydroxyapatite Core–Shell Particles

Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 1959
Author(s):  
Seiya Suzuki ◽  
Sungho Lee ◽  
Tatsuya Miyajima ◽  
Katsuya Kato ◽  
Ayae Sugawara-Narutaki ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Lactic Acid ◽  
Drug Loading ◽  
Poly Lactic Acid ◽  
Core Shell ◽  
Vitamin K1 ◽  
Acidic Conditions ◽  
Living Organisms ◽  
Shell Particles ◽  
Hydrophobic Substance

Poly(lactic acid)/hydroxyapatite (PLA/HAp) core–shell particles are prepared using the emulsification method. These particles are safe for living organisms because they are composed of biodegradable polymers and biocompatible ceramics. These particles are approximately 50–100 nm in size, and their hydrophobic substance loading can be controlled. Hence, PLA/HAp core–shell particles are expected to be used as drug delivery carriers for hydrophobic drugs. In this work, PLA/HAp core–shell particles with a loading of vitamin K1 were prepared, and their drug-loading ability was evaluated. The particles were 40–80 nm in diameter with a PLA core and a HAp shell. The particle size increased with an increase in the vitamin K1 loading. The drug-loading capacity (LC) value of the particles, an indicator of their drug-loading ability, was approximately 250%, which is higher than the previously reported values. The amount of vitamin K1 released from the particles increased as the pH of the soaking solution decreased because the HAp shell easily dissolved under the acidic conditions. The PLA/HAp particles prepared in this work were found to be promising candidates for drug delivery carriers because of their excellent drug-loading ability and pH sensitivity.

scholarly journals Explosion Suppression Control Technology of FG Strong Adsorption Material for Leakage / Flowing Fire of Hazardous Chemicals

2021 ◽  
Vol 299 ◽  
pp. 01003
Author(s):  
Jianshe Huang ◽  
Wujun Hu ◽  
Ying Huang ◽  
Enlei Jing ◽  
Jianyue Fu ◽  
...  
Keyword(s):  
Oil Spill ◽  
Land Surface ◽  
Production Operation ◽  
Hazardous Chemicals ◽  
Environmental Disasters ◽  
Explosion Suppression ◽  
Strong Adsorption ◽  
In Fire ◽  
Hydrophobic Substance ◽  
Disposal Cost

At present, in the process of production, operation, storage, transportation, use and disposal of petroleum and chemical solvents, major environmental disasters, such as fire, explosion and personal injury caused by leakage, are common. The disasters are often aggravated by the backward emergency disposal technology and improper operation. FG polymer is an inert, strong adsorptive material for hydrophobic substance, and the material is safe itself and non-toxic to aquatic fish and plants. In this study, FG polymer is tested in fire-fighting, explosion suppression and controling flowing fire. The result shows that the FG strong adsorption material can quickly absorb oil spill and leakage of hazardous chemicals on water and land surface, therefore controlling and eliminating the spread of flowing fire, isolating oxygen, extinguishing fire, suppressing explosion, and effectively avoiding environmental pollution. This technology can replace the backward emergency disposal methods such as oil spill dispersant, PP absorbent felt. With this technology being applied in emergence rescue, the disposal cost can be reduced by more than 50%, additionally the abilities of risk prevention, hidden danger elimination, and accident suppression can be enhanced significantly.

scholarly journals The development of methods for the determination of residues of the herbicide halauxifen-methyl in barley and rape

2018 ◽  
pp. 59-65 ◽  
Author(s):  
Mikhail F. Zayats ◽  
Sergey M. Leschev
Keyword(s):  
Aqueous Solution ◽  
Distribution Coefficients ◽  
Extraction Constant ◽  
Weak Base ◽  
Salting Out ◽  
Green Mass ◽  
Distribution Constants ◽  
Maximum Allowable Content ◽  
Hydrophobic Substance

Optimal conditions for the extraction of halauxifen-methyl from grain, straw and green mass of barley; seeds, oil and green mass of rape, as well as the conditions for the purification of extracts were selected on the basis of the distribution constants (P) and distribution coefficients (D) experimentally determined at a temperature of (20 ± 1) °C. At the first stage, acetonitrile, or acidified acetonitrile, or a mixture of water and acetonitrile were used to extract the pesticide. Halauxi fen-methyl was found to be a weakly hydrophobic substance and it exhibits the properties of a weak base in aqueous solutions. For the purification of plant material extracts hexane – 1 mol/L aqueous solution of hydrochloric acid and hexane – 10 % K2HPO4 aqueous solution were successfully used (to neutralize the acid and increase the extraction constant due to the salting out effect). The samples obtained after purification are sufficiently pure. So, the residual amounts of halauxifen-methyl can be determined by widespread liquid chromatography with diode array (ultraviolet) detection at the level, which is equal or lower to the maximum allowable content of herbicide in barley and rape.

scholarly journals The research of the structure and content of the seed coat of Gleditsia and some changes in its structure during the swelling

2021 ◽  
Vol 206 (03) ◽  
pp. 46-52
Author(s):  
Anastasiya Balakina ◽  
Elena Nefed'eva ◽  
Yuliya Larikova
Keyword(s):  
Mechanical Properties ◽  
Seed Coat ◽  
Thin Shell ◽  
Tight Coupling ◽  
Hard Seed ◽  
Physical Chemical ◽  
Honey Locust ◽  
Parenchymal Cells ◽  
Hard Seed Coat ◽  
Hydrophobic Substance

Abstract. The goal is to study the structure and content of the seed coat of Gleditsia triacanthos L. with a hard seed coat, and some changes in its structure when this seeds swell. Research methods. One of the main reasons for hard-seeding is the hard, waterproof seed skin. In practice, before sowing, solid seeds are subjected to various types of treatments: physical or chemical, which increases the permeability of the seed shell to water. The seeds were treated with acetone, provided that the suberin, which is part of the seed shell with a solid cover, is a highly polymer hydrophobic substance with mandatory component – saturated and unsaturated acidic triglycerides and triglycerides, and partially dissolves in a solution of acetone. The presence of lignified elements, suberin and polysaccharides in the seed coat of honey-locust was confirmed by IR spectra of the surface of the seed coat, as well as histochemical reactions. The structure and composition of the seed coat were studied on the example of seeds of honey-locust. The results. In the coat of the seed of honey-locust there are identified three major layers with different physical-chemical and mechanical properties that vary with their functions. The cells of the epidermis of the seed coat of honey-locust have a thin shell with partial lignification. The hypoderm consists of cells impregnated with the hydrophobic substance suberin, whose shape is elongated parallel to the surface and provides a tight coupling between them. The parenchyma is the most powerful layer, consisting of parenchymal cells that are laid loosely. Scientific novelty. The research made it possible to find out the functions of individual layers of the Gleditsia seed coat, as well as to track changes in the structure of the seed coat when this seed swells.

Preparation of Water-Repellent and Flame-Retardant Coating on Mulberry Paper

2013 ◽  
Vol 770 ◽  
pp. 100-103
Author(s):  
Sunisa Jindasuwan ◽  
Nattinee Sukmanee ◽  
Chanida Supanpong ◽  
On-uma Nimittrakoolchai ◽  
Sitthisuntorn Supothina
Keyword(s):  
Flame Retardant ◽  
Weight Ratio ◽  
Consumer Products ◽  
Water Repellent ◽  
Hydroxyl Groups ◽  
Monoammonium Phosphate ◽  
Water Contact ◽  
Coating Solution ◽  
Hydrophobic Substance ◽  
Mulberry Paper

A mulberry paper has been used to produce many consumer products such as lantern, card, packaging and decorating articles. Similar to other cellulosic materials, the mulberry paper bears abundant hydroxyl groups on its surface. Besides easily ignited, it can absorb water or humidity. To improve its thermal stability and to reduce deterioration caused by moisture adsorption, the mulberry paper was coated with a flame-retardant substance which was monoammonium phosphate (MAP) and a hydrophobic substance which was poly (methylhydrogen siloxane) (PMHS). The coating was conducted by immersing the mulberry paper in coating solution for 2 min followed by drying at 50 °C for 30 min. By varying a weight ratio of the PMHS and MAP, the PMHS:MAP weight ratio of 10:10 was found to be the optimum coating solution. The coated mulberry paper had good thermal property according to the thermogravimetric analysis. The uncoated mulberry paper showed residue of about 21% while the coated mulberry paper showed the increased residue of more than 50%. The burning test revealed that the coated mulberry paper was self-extinguished after removal of the ignition source while complete burning was observed on the uncoated paper. Moreover, it was water repellent with a water contact angle of 101.48 ± 5.81 degrees.

Influence of hydrophobic substance on enhancing washing durability of water soluble flame-retardant coating

2013 ◽  
Vol 275 ◽  
pp. 239-243 ◽  
Author(s):  
Sunisa Jindasuwan ◽  
Nattinee Sukmanee ◽  
Chanida Supanpong ◽  
Mantana Suwan ◽  
On-uma Nimittrakoolchai ◽  
...  
Keyword(s):  
Flame Retardant ◽  
Water Soluble ◽  
Washing Durability ◽  
Hydrophobic Substance
Sign in / Sign up

Export Citation Format

Share Document