scholarly journals Light-induced assembly of living bacteria with honeycomb substrate

2020 ◽  
Vol 6 (9) ◽  
pp. eaaz5757 ◽  
Author(s):  
Shiho Tokonami ◽  
Shinya Kurita ◽  
Ryo Yoshikawa ◽  
Kenji Sakurai ◽  
Taichi Suehiro ◽  
...  
Keyword(s):  
High Performance ◽  
Electrical Current ◽  
High Density ◽  
High Survival ◽  
Density Condition ◽  
Environmental Technology ◽  
Self Organized ◽  
Promising Solution ◽  
Energy Conversion Devices ◽  
Living Bacteria

Some bacteria are recognized to produce useful substances and electric currents, offering a promising solution to environmental and energy problems. However, applications of high-performance microbial devices require a method to accumulate living bacteria into a higher-density condition in larger substrates. Here, we propose a method for the high-density assembly of bacteria (106 to 107 cells/cm2) with a high survival rate of 80 to 90% using laser-induced convection onto a self-organized honeycomb-like photothermal film. Furthermore, the electricity-producing bacteria can be optically assembled, and the electrical current can be increased by one to two orders of magnitude simply by increasing the number of laser irradiations. This concept can facilitate the development of high-density microbial energy conversion devices and provide new platforms for unconventional environmental technology.

scholarly journals Integration of full divertor detachment with improved core confinement for tokamak fusion plasmas

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
L. Wang ◽  
H. Q. Wang ◽  
S. Ding ◽  
A. M. Garofalo ◽  
X. Z. Gong ◽  
...  
Keyword(s):  
Steady State ◽  
High Performance ◽  
Confinement Loss ◽  
Fusion Plasmas ◽  
Large Radius ◽  
Transport Barrier ◽  
Self Organized ◽  
Steady State Operation ◽  
Core Plasma ◽  
Promising Solution

AbstractDivertor detachment offers a promising solution to the challenge of plasma-wall interactions for steady-state operation of fusion reactors. Here, we demonstrate the excellent compatibility of actively controlled full divertor detachment with a high-performance (βN ~ 3, H98 ~ 1.5) core plasma, using high-βp (poloidal beta, βp > 2) scenario characterized by a sustained core internal transport barrier (ITB) and a modest edge transport barrier (ETB) in DIII-D tokamak. The high-βp high-confinement scenario facilitates divertor detachment which, in turn, promotes the development of an even stronger ITB at large radius with a weaker ETB. This self-organized synergy between ITB and ETB, leads to a net gain in energy confinement, in contrast to the net confinement loss caused by divertor detachment in standard H-modes. These results show the potential of integrating excellent core plasma performance with an efficient divertor solution, an essential step towards steady-state operation of reactor-grade plasmas.

Sub-20nm Device Voltage-Sensitive SRAM Characterization and Failure Analysis

2018 ◽  
Author(s):  
Seng Nguon Ting ◽  
Hsien-Ching Lo ◽  
Donald Nedeau ◽  
Aaron Sinnott ◽  
Felix Beaudoin
Keyword(s):  
Failure Analysis ◽  
High Performance ◽  
Yield Loss ◽  
Technology Development ◽  
High Density ◽  
High K ◽  
Yield Learning ◽  
Oxide Deposition ◽  
Edge Profile ◽  
High K Dielectric

Abstract With rapid scaling of semiconductor devices, new and more complicated challenges emerge as technology development progresses. In SRAM yield learning vehicles, it is becoming increasingly difficult to differentiate the voltage-sensitive SRAM yield loss from the expected hard bit-cells failures. It can only be accomplished by extensively leveraging yield, layout analysis and fault localization in sub-micron devices. In this paper, we describe the successful debugging of the yield gap observed between the High Density and the High Performance bit-cells. The SRAM yield loss is observed to be strongly modulated by different active sizing between two pull up (PU) bit-cells. Failure analysis focused at the weak point vicinity successfully identified abnormal poly edge profile with systematic High k Dielectric shorts. Tight active space on High Density cells led to limitation of complete trench gap-fill creating void filled with gate material. Thanks to this knowledge, the process was optimized with “Skip Active Atomic Level Oxide Deposition” step improving trench gap-fill margin.

scholarly journals A Brief Overview of On-Chip Voltage Regulation in High-Performance and High-Density Integrated Circuits

IEEE Access ◽  
2021 ◽  
Vol 9 ◽  
pp. 813-826
Author(s):  
Farid Uddin Ahmed ◽  
Zarin Tasnim Sandhie ◽  
Liaquat Ali ◽  
Masud H. Chowdhury
Keyword(s):  
Integrated Circuits ◽  
High Performance ◽  
Voltage Regulation ◽  
High Density ◽  
On Chip

scholarly journals Porous Carbon Architecture Assembled by Cross-Linked Carbon Leaves with Implanted Atomic Cobalt for High-Performance Li–S Batteries

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Ruirui Wang ◽  
Renbing Wu ◽  
Chaofan Ding ◽  
Ziliang Chen ◽  
Hongbin Xu ◽  
...  
Keyword(s):  
Active Sites ◽  
High Performance ◽  
Specific Capacity ◽  
Three Dimension ◽  
Zeolitic Imidazolate Framework ◽  
Shuttle Effect ◽  
Promising Solution ◽  
Fading Rate ◽  
Kinetics Of ◽  
Sulfur Cathodes

AbstractThe practical application of lithium–sulfur batteries is severely hampered by the poor conductivity, polysulfide shuttle effect and sluggish reaction kinetics of sulfur cathodes. Herein, a hierarchically porous three-dimension (3D) carbon architecture assembled by cross-linked carbon leaves with implanted atomic Co–N4 has been delicately developed as an advanced sulfur host through a SiO2-mediated zeolitic imidazolate framework-L (ZIF-L) strategy. The unique 3D architectures not only provide a highly conductive network for fast electron transfer and buffer the volume change upon lithiation–delithiation process but also endow rich interface with full exposure of Co–N4 active sites to boost the lithium polysulfides adsorption and conversion. Owing to the accelerated kinetics and suppressed shuttle effect, the as-prepared sulfur cathode exhibits a superior electrochemical performance with a high reversible specific capacity of 695 mAh g−1 at 5 C and a low capacity fading rate of 0.053% per cycle over 500 cycles at 1 C. This work may provide a promising solution for the design of an advanced sulfur-based cathode toward high-performance Li–S batteries.

Highly doped and exposed Cu(i)–N active sites within graphene towards efficient oxygen reduction for zinc–air batteries

2016 ◽  
Vol 9 (12) ◽  
pp. 3736-3745 ◽  
Author(s):  
Haihua Wu ◽  
Haobo Li ◽  
Xinfei Zhao ◽  
Qingfei Liu ◽  
Jing Wang ◽  
...  
Keyword(s):  
Oxygen Reduction ◽  
Active Sites ◽  
High Performance ◽  
High Density ◽  
Catalyst Loading ◽  
Zinc Air Batteries

High-density coordination unsaturated copper(i)–nitrogen embedded in graphene demonstrates a high performance and stability in primary zinc–air batteries with ultralow catalyst loading.

A high performance, high density sea of modules FPGA architecture

2002 ◽  
Author(s):  
K. El-Ayat ◽  
S. Kaptanoglu ◽  
R. Chan ◽  
J. Lien ◽  
W. Plants ◽  
...  
Keyword(s):  
High Performance ◽  
High Density ◽  
Fpga Architecture
Sign in / Sign up

Export Citation Format

Share Document