scholarly journals Strongly interacting dipolar-polaritons

2018 ◽  
Vol 4 (10) ◽  
pp. eaat8880 ◽  
Author(s):  
Itamar Rosenberg ◽  
Dror Liran ◽  
Yotam Mazuz-Harpaz ◽  
Kenneth West ◽  
Loren Pfeiffer ◽  
...  
Keyword(s):  
Electric Field ◽  
Interaction Strength ◽  
Dipolar Interaction ◽  
Electronic Excitations ◽  
Quantum Simulators ◽  
Strongly Interacting ◽  
Wide Range ◽  
Exciton Polaritons ◽  
Topological States ◽  
Large Interaction

Exciton-polaritons are mutually interacting quantum hybridizations of confined photons and electronic excitations. Here, we demonstrate a system of optically guided, electrically polarized exciton-polaritons (“dipolaritons”) that displays up to 200-fold enhancement of the polariton-polariton interaction strength compared to unpolarized polaritons. The magnitude of the dipolar interaction enhancement can be turned on and off and can be easily tuned over a very wide range by varying the applied polarizing electric field. The large interaction strengths and the very long propagation distances of these fully guided dipolaritons open up new opportunities for realizing complex quantum circuitry and quantum simulators, as well as topological states based on exciton-polaritons, for which the interactions between polaritons need to be large and spatially or temporally controlled. The results also raise fundamental questions on the origin of these large enhancements.

scholarly journals Sorting Fermionization from Crystallization in Many-Boson Wavefunctions

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
S. Bera ◽  
B. Chakrabarti ◽  
A. Gammal ◽  
M. C. Tsatsos ◽  
M. L. Lekala ◽  
...  
Keyword(s):  
Interaction Strength ◽  
Dipolar Interaction ◽  
Spatial Dimension ◽  
Strongly Correlated ◽  
Body Density ◽  
One Dimensional ◽  
Confinement Potential ◽  
Strongly Interacting ◽  
The One ◽  
Infinite Repulsion

AbstractFermionization is what happens to the state of strongly interacting repulsive bosons interacting with contact interactions in one spatial dimension. Crystallization is what happens for sufficiently strongly interacting repulsive bosons with dipolar interactions in one spatial dimension. Crystallization and fermionization resemble each other: in both cases – due to their repulsion – the bosons try to minimize their spatial overlap. We trace these two hallmark phases of strongly correlated one-dimensional bosonic systems by exploring their ground state properties using the one- and two-body density matrix. We solve the N-body Schrödinger equation accurately and from first principles using the multiconfigurational time-dependent Hartree for bosons (MCTDHB) and for fermions (MCTDHF) methods. Using the one- and two-body density, fermionization can be distinguished from crystallization in position space. For N interacting bosons, a splitting into an N-fold pattern in the one-body and two-body density is a unique feature of both, fermionization and crystallization. We demonstrate that this splitting is incomplete for fermionized bosons and restricted by the confinement potential. This incomplete splitting is a consequence of the convergence of the energy in the limit of infinite repulsion and is in agreement with complementary results that we obtain for fermions using MCTDHF. For crystalline bosons, in contrast, the splitting is complete: the interaction energy is capable of overcoming the confinement potential. Our results suggest that the spreading of the density as a function of the dipolar interaction strength diverges as a power law. We describe how to distinguish fermionization from crystallization experimentally from measurements of the one- and two-body density.

Development of PEF extraction technology by Maguin

2015 ◽  
pp. 758-760
Author(s):  
Romain Delecourt ◽  
Loïc Marsal
Keyword(s):  
Sugar Beet ◽  
Electric Field ◽  
Pulsed Electric Field ◽  
Extraction Technology ◽  
Application System ◽  
Wide Range ◽  
Type Machine

Maguin (France) is still active in the application of pulsed electric field (PEF) technology. After having carried out successful tests on a 10 t/h pilot screw-type machine on sugar beet cossettes, a new application system based on a roller technology has been developed. This technology allows a wide range of application due to its flexibility with flowrates and materials. A variety of process schemes are proposed to ensure the best performance of the PEF technology.

The vibration of electrified water drops

1971 ◽  
Vol 322 (1551) ◽  
pp. 523-534 ◽  
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Axial Ratio ◽  
Uniform Electric Field ◽  
Interferometric Technique ◽  
Photographic Analysis ◽  
Wide Range ◽  
Water Drops ◽  
Strength And Deformation ◽  
A Charge

Pressure has been used as the principal parameter in calculations of the fundamental vibrational frequencies of spherical drops of radius R , density ρ, and surface tension T carrying a charge Q or uncharged spheroidal drops of axial ratio a / b situated in a uniform electric field of strength E . Freely vibrating charged drops have a frequency f = f 0 ( 1 - Q 2 /16π R 3 T ) ½ , as shown previously by Rayleigh (1882) using energy considerations; f 0 is the vibrational frequency of non-electrified drops (Rayleigh 1879). The fundamental frequency of an uncharged drop in an electric field will decrease with increasing field strength and deformation a / b and will equal zero when E ( R )/ T ) ½ = 1.625 and a / b = 1.86; these critical values correspond to the disintegration conditions derived by Taylor (1964). An interferometric technique involving a laser confirmed the accuracy of the calculations concerned with charged drops. The vibration of water drops of radius around 2 mm was studied over a wide range of temperatures as they fell through electric fields either by suspending them in a vertical wind tunnel or allowing them to fall between a pair of vertical electrodes. Photographic analysis of the vibrations revealed good agreement between theory and experiment over the entire range of conditions studied even though the larger drops were not accurately spheroidal and the amplitude of the vibrations was large.

Electrostatic Dispensing of Dry Dielectric Materials

2001 ◽  
Vol 700 ◽  
Author(s):  
Malinda M. Tupper ◽  
Marjorie E. Chopinaud ◽  
Takamichi Ogawa ◽  
Michael J. Cima
Keyword(s):  
Electric Field ◽  
Field Intensity ◽  
Electric Field Intensity ◽  
Dielectric Materials ◽  
Nonuniform Electric Field ◽  
Sodium Fluorescein ◽  
Silica Spheres ◽  
Electrode Geometry ◽  
Wide Range ◽  
Silica Beads

AbstractDispensing micron-scale dielectric materials can be achieved through the use of dielectrophoresis. Electrodes are designed to create a nonuniform electric field. This method is expected to be applicable for transfer of a wide range of dielectric powders as well as small, shaped components. Small, 150 μm diameter silica spheres, as well as sodium fluorescein powder have been dispensed by this method. Selecting the appropriate electrode geometry and electric field intensity controls the amount collected. As little as 1.0 μg of sodium fluorescein powder, and as much as 16 mg of silica beads have been collected, and repeatability within 10 % of the total amount dispensed has been achieved.

Fabrication of Ionic Polymer Metal Composite Actuator with Palladium Electrodes and Evaluation of its Bending Response

2009 ◽  
Vol 1190 ◽  
Author(s):  
Takuma Kobayashi ◽  
Takeshi Kuribayashi ◽  
Masaki Omiya
Keyword(s):  
Electric Field ◽  
Sample Length ◽  
Metal Composite ◽  
Ionic Polymer Metal Composite ◽  
Ionic Polymer ◽  
Palladium Electrode ◽  
Wide Range ◽  
Polymer Metal ◽  
Bending Response ◽  
Tip Displacement

AbstractWe built up the way of fabricating IPMC actuator with palladium electrodes and we found that it showed large bending response than Au-plated IPMC actuator. An ionic polymer-metal composite (IPMC) consisting of a thin perfuorinated ionomer membrane, electrodes plated on both faces, undergoes large bending motion when a small electric field is applied across its thickness in a hydrated state. The characteristics of IPMC are ease of miniaturization, low density, and mechanical flexibility. Therefore, it is considered to have a wide range of applications from MEMS sensor to artificial muscle. However, there are problems on IPMC. First, its mechanical and electric characteristics have not been clarified because of the complex mechanism of the deformation. Second, it is high-priced because most of IPMC actuators use gold or platinum as electrodes. In order for IPMC actuator to be widely put to practical use, we should solve these problems. Hence, this research focuses on fabrication of IPMC actuator with palladium electrode, which is cheaper than gold or platinum, and evaluation of its mechanical properties such as its tip displacement. We fabricated IPMC consisting of a thin Nafion® membrane, which is the film with fluorocarbon back-bones and mobile cations, sandwiched between two thin palladium plates. The surface resistivity was 2.88±0.18Ω/sq., so it could be said to be enough small. Then, we observed its cross section by using FE-SEM. As a result, palladium plates were evenly coated and its thickness was about 30μm. Also, we carried out an actuation test for two kinds of IPMCs: one was fabricated by using Nafion®117 (thickness 183μm), the other was by Nafion®115 (thickness 127μm). In this test, the relationship between voltage (0˜4V) across its thickness and tip displacement for the cantilevered strip of the IPMC was measured. Then we found that IPMCs showed large bending motion under a low electric field. When Nafion®117 sample was subjected to voltage of 1.5V, the ratio of the tip displacement to the sample length was 0.35, which was lager bending than Au-plated IPMC actuator, whose ratio of the tip displacement to the sample length was 0.12 [1]. When Nafion®115 sample was applied to 1.5V, the ratio of the tip displacement to the sample length was 0.22. Then, we found that Nafion®117 bended in a larger way than Nafion®115. Reference [1]Sia Nemat-Nesser and Yongxian Wu,”Comparative experimental study of ionic polymer-metal composites with different backbone ionomers and in various cation forms”, Journal of Applied Physics,93,5255 (2003)

scholarly journals Improving of electrical channels for magnetotelluric sounding instrumentation

2015 ◽  
Vol 4 (2) ◽  
pp. 149-154 ◽  
Author(s):  
A. M. Prystai ◽  
V. O. Pronenko
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Deep Structure ◽  
Experimental Tests ◽  
Magnetotelluric Sounding ◽  
Earth’S Crust ◽  
Geomagnetic Variations ◽  
The Earth ◽  
Wide Range ◽  
Earth's Crust

Abstract. The study of the deep structure of the Earth's crust is of great interest for both applied (e.g. mineral exploration) and scientific research. For this the electromagnetic (EM) studies which enable one to construct the distribution of electrical conductivity in the Earth's crust are of great use. The most common method of EM exploration is magnetotelluric sounding (MT). This passive method of research uses a wide range of natural geomagnetic variations as a powerful source of electromagnetic induction in the Earth, producing telluric current variations there. It includes the measurements of variations of natural electric and magnetic fields in orthogonal directions at the surface of the Earth. By this, the measurements of electric fields are much more complicated metrological processes, and, namely, they limit the precision of MT prospecting. This is especially complicated at deep sounding when measurements of long periods are of interest. The increase in the accuracy of the electric field measurement can significantly improve the quality of MT data. Because of this, the development of a new version of an instrument for the measurements of electric fields at MT – both electric field sensors and the electrometer – with higher levels relative to the known instrument parameter level – was initiated. The paper deals with the peculiarities of this development and the results of experimental tests of the new sensors and electrometers included as a unit in the long-period magnetotelluric station LEMI-420 are given.

scholarly journals Experimental methodology and procedure for SAPPHIRE:a Semi-automatic APParatus for High-voltage Ice nucleation REsearch

2020 ◽  
Author(s):  
Jens-Michael Löwe ◽  
Markus Schremb ◽  
Volker Hinrichsen ◽  
Cameron Tropea
Keyword(s):  
Electric Field ◽  
High Voltage ◽  
Surface Defects ◽  
Ice Nucleation ◽  
Experimental Methodology ◽  
Cloud Formation ◽  
Crystal Formation ◽  
Strong Impact ◽  
Wide Range ◽  
Accuracy And Repeatability

Abstract. Ice nucleation is of great interest for various processes such as cloud formation in the scope of atmospheric research, and icing of airplanes, ships or structures. Ice nucleation research aims to improve the knowledge about the physical mechanisms and, therefore improve the safety and reliability of the applications affected by ice nucleation. Several influencing factors like liquid supercooling or contamination with nucleants, as well as external disturbances such as an electric field or surface defects affect ice nucleation. Especially for ice crystal formation in clouds and icing of high-voltage equipment, an external electric field may have a strong impact on ice nucleation. Although ice nucleation has been widely investigated for numerous conditions, the effect of an electric field on nucleation is not yet completely understood; results reported in literature are even contradictory. In the present study, an advanced experimental approach for the examination of ice nucleation in water droplets exposed to an electric field is demonstrated. It comprises a method for droplet ensemble preparation and an experimental setup, which allows observation of the droplet ensemble during its exposure to well-defined thermal and electric fields, which are both variable over a wide range. The entire approach aims at maximizing the accuracy and repeatability of the experiments in order to enable examination of even the most minor influences on ice nucleation. For that purpose, the boundary conditions the droplet sample is exposed to during the experiment are examined in particular detail using experimental and numerical methods. The methodological capabilities and accuracy have been demonstrated based on several test nucleation experiments without an electric field, indicating almost perfect repeatability.

scholarly journals Microcavity-Like Exciton-Polaritons can be the Primary Photoexcitation in Bare Organic Semiconductors

2021 ◽  
Author(s):  
Akshay Rao ◽  
Raj Pandya ◽  
Richard Chen ◽  
Qifei Gu ◽  
Jooyoug Sung ◽  
...  
Keyword(s):  
Organic Semiconductors ◽  
Room Temperature ◽  
External Cavity ◽  
Materials Chemistry ◽  
Strong Light ◽  
Organic Systems ◽  
Reflectivity Spectra ◽  
Wide Range ◽  
Exciton Polaritons ◽  
Photonic States

Abstract Exciton-polaritons (EPs) are quasiparticles formed by the hybridization of excitons with light modes. As organic semiconductors sustain stable excitons at room-temperature, these materials are being actively studied for room temperature polaritonic devices1–3. This is typically in the form of cavity-based systems, where molecules are confined between metallic or dielectric mirrors 4–6 or in a plasmonic gap 7,8. In such systems strong light-matter coupling gives rise to polariton splittings on the order of 200 to 300 meV 6. A wide range of phenomena have been demonstrated in cavity-polariton systems including super-fluidity9, precisely controlled chemical reactions10 and long-range energy propagation11. Here, using a range of chemically diverse model organic systems we show that interactions between excitons and moderately confined photonic states within the (thin) film can lead to the formation of EPs, with a defined lifetime, even in the absence of external cavities. We demonstrate the presence of EPs via angular dependent splittings in reflectivity spectra on the order of 30 meV and collective emission from ~5 ×107 coupled molecules. Additionally, we show that at room temperature these EPs can transport energy up to ~270 nm at velocities of ~5 ×106 m s-1. This propagation velocity and distance is sensitive to, and can be tuned by, the refractive index of the external environment. However, although sensitive to the nanoscale morphology the formation of the exciton-polariton states is a general phenomenon, independent of underlying materials chemistry, with the principal material requirements being a high oscillator strength per unit volume and low disorder. These results and design rules will enable the harnessing of EP effects for a new application in optoelectronics, light harvesting 9,12,13 and cavity controlled chemistry without the limiting requirement of an external cavity.

Mechanical effect of an electric field on nanostructure elements

2021 ◽  
Vol 3 ◽  
pp. 79-82
Author(s):  
V. P. Babaev ◽  
◽  
S. V. Zaitsev ◽  
K. A. Inshakova ◽  
A. N. Shaykin ◽  
...  
Keyword(s):  
Electric Field ◽  
Electric Potential ◽  
High Intensity ◽  
Structural Damage ◽  
High Surface ◽  
Mechanical Effect ◽  
Surface Curvature ◽  
Electrical Discharges ◽  
Experimental Estimation ◽  
Wide Range

A computational and experimental estimation of the magnitude of forces acting in a high-intensity electric field on elements of nanoconstructions with a high surface curvature is made. Depending on the magnitude of the electric potential and vacuum conditions, these forces can vary both in magnitude and direction over a wide range. They can cause structural damage, as well as provoke unwanted electrical discharges. The possibilities of useful application of these effects are analyzed.

Sign in / Sign up

Export Citation Format

Share Document