Adjusting the soundboard’s modal parameters without mechanical change: A modal active control approach

2014 ◽  
Vol 136 (4) ◽  
pp. 2132-2132 ◽  
Author(s):  
Adrien Mamou-Mani
Keyword(s):  
Active Control ◽  
Modal Parameters ◽  
Control Approach ◽  
Mechanical Change

scholarly journals A Critical Review of Supersonic Flow Control for High-Speed Applications

2021 ◽  
Vol 11 (15) ◽  
pp. 6899
Author(s):  
Abdul Aabid ◽  
Sher Afghan Khan ◽  
Muneer Baig
Keyword(s):  
Supersonic Flow ◽  
Flow Control ◽  
Active Control ◽  
Critical Review ◽  
High Speed ◽  
Passive Control ◽  
Control Method ◽  
Sudden Expansion ◽  
Control Approach ◽  
Cost Efficient

In high-speed fluid dynamics, base pressure controls find many engineering applications, such as in the automobile and defense industries. Several studies have been reported on flow control with sudden expansion duct. Passive control was found to be more beneficial in the last four decades and is used in devices such as cavities, ribs, aerospikes, etc., but these need additional control mechanics and objects to control the flow. Therefore, in the last two decades, the active control method has been used via a microjet controller at the base region of the suddenly expanded duct of the convergent–divergent (CD) nozzle to control the flow, which was found to be a cost-efficient and energy-saving method. Hence, in this paper, a systemic literature review is conducted to investigate the research gap by reviewing the exhaustive work on the active control of high-speed aerodynamic flows from the nozzle as the major focus. Additionally, a basic idea about the nozzle and its configuration is discussed, and the passive control method for the control of flow, jet and noise are represented in order to investigate the existing contributions in supersonic speed applications. A critical review of the last two decades considering the challenges and limitations in this field is expressed. As a contribution, some major and minor gaps are introduced, and we plot the research trends in this field. As a result, this review can serve as guidance and an opportunity for scholars who want to use an active control approach via microjets for supersonic flow problems.

scholarly journals Synchronization and Anti-Synchronization of Two Identical Hyperchaotic Systems Based on Active Backstepping Design

2011 ◽  
pp. 117-122
Author(s):  
Atefeh Saedian ◽  
Hassan Zarabadipoor
Keyword(s):  
Numerical Simulations ◽  
Active Control ◽  
Chaos Control ◽  
Control Method ◽  
Design Method ◽  
Backstepping Design ◽  
Backstepping Technique ◽  
Control Approach ◽  
Hyperchaotic Systems

This paper presents an active backstepping design method for synchronization and anti-synchronization of two identical hyperchaotic Chen systems. The proposed control method, combining backstepping design and active control approach, extends the application of backstepping technique in chaos control. Based on this method, different combinations of controllers can be designed to meet the needs of different applications. Numerical simulations are shown to verify the results.

Seismic Response Control for Four High-Rise Building Structures Using Connected Control Method

2007 ◽  
Author(s):  
Kazuto Seto ◽  
Chinori Iio ◽  
Shigeru Inaba ◽  
Shingo Mitani ◽  
Fadi Dohnal ◽  
...  
Keyword(s):  
Seismic Response ◽  
Active Control ◽  
Control Method ◽  
Control Force ◽  
Building Structures ◽  
Response Control ◽  
Control Approach ◽  
Seismic Response Control ◽  
High Rise ◽  
Lq Control

This paper presents a vibration control method for multiple high-rise buildings against large earthquake motion. This method is called as “Connected Control Method (CCM)” and has the merit of obtaining enough control force to protect high-rise buildings from large earthquakes using passive and semiactive devices. In this paper, first a modeling approach for four scaled building structures is shown and effectiveness of the CCM using LQ control approach for them is demonstrated by seismic response control results. Next, in order to reduce the supplied power, a semi-active control approach in place of active control is applied for the CCM. For this purpose, a new MR damper is developed and designed to have a close performance with results of the LQ control. This performance is verified by measured frequency responses.

scholarly journals Active control and sound synthesis—two different ways to investigate the influence of the modal parameters of a guitar on its sound

2016 ◽  
Vol 139 (3) ◽  
pp. 1411-1419 ◽  
Author(s):  
Simon Benacchio ◽  
Adrien Mamou-Mani ◽  
Baptiste Chomette ◽  
Victor Finel
Keyword(s):  
Active Control ◽  
Sound Synthesis ◽  
Modal Parameters

scholarly journals Cooperative Control Method of Active and Semiactive Control: New Framework for Vibration Control

2014 ◽  
Vol 2014 ◽  
pp. 1-11 ◽  
Author(s):  
Kazuhiko Hiramoto
Keyword(s):  
Vibration Control ◽  
Active Control ◽  
Cooperative Control ◽  
Control Method ◽  
Design Method ◽  
Control Object ◽  
Control Device ◽  
Semiactive Control ◽  
Control Input ◽  
Control Approach

A new control design framework for vibration control, the cooperative control of active and semiactive control, is proposed in the paper. In the cooperative control, a structural system having both of an actuator and a semiactive control device, for example, MR damper and so forth, is defined as the control object. In the proposed control approach, the higher control performance is aimed by the cooperative control between the active control with the actuator and the semiactive control with the semiactive control device. A design method to determine the active control input and the command signal to drive the semiactive control device based on the one-step prediction of the control output is proposed. A simulation example of a control system design for a benchmark building is presented to show the effectiveness of the proposed control framework.

Active Control of a Circular Membrane to Reduce Transient Noise Transmission

1995 ◽  
Vol 117 (3A) ◽  
pp. 252-258 ◽  
Author(s):  
J. L. van Niekerk ◽  
B. H. Tongue
Keyword(s):  
Feedback Control ◽  
Active Control ◽  
Sliding Mode ◽  
Control Strategies ◽  
Circular Membrane ◽  
Velocity Feedback ◽  
Circular Duct ◽  
Control Approach ◽  
Noise Transmission

An active control approach that reduces transient noise transmission through a membrane in a circular duct is presented. Discrete sections of piezo-electrical film, PVDF, are used as actuators to adjust the tension of the membrane. Different control strategies, such as optimal, sliding mode and velocity feedback control, are investigated analytically and then implemented experimentally. It is shown that velocity feedback control is the more effective, stable controller for this application.

Active control of sound transmission using a hybrid/blind decentralized control approach

2013 ◽  
Vol 21 (13) ◽  
pp. 2661-2684 ◽  
Author(s):  
Ming Yuan ◽  
Jinhao Qiu ◽  
Hongli Ji ◽  
Weiyinuo Zhou ◽  
Roger Ohayon
Keyword(s):  
Active Control ◽  
Decentralized Control ◽  
Sound Transmission ◽  
Control Approach
Sign in / Sign up

Export Citation Format

Share Document