A two-dimensional/three-dimensional hybrid structural model of the vocal folds

2011 ◽  
Vol 130 (4) ◽  
pp. 2550-2550
Author(s):  
Douglas Cook ◽  
Pradeep George ◽  
Margaret Julias
Keyword(s):  
Structural Model ◽  
Three Dimensional ◽  
Vocal Folds ◽  
Two Dimensional

scholarly journals Enhancement of thrust reverser cascade performance using aerodynamic and structural integration

2004 ◽  
Vol 108 (1090) ◽  
pp. 621-628 ◽  
Author(s):  
J. Butterfield ◽  
H. Yao ◽  
M. Price ◽  
C. Armstrong ◽  
S. Raghunathan ◽  
...  
Keyword(s):  
Structural Model ◽  
Three Dimensional ◽  
Operating Conditions ◽  
Product Development Process ◽  
Structural Performance ◽  
Two Dimensional ◽  
Operational Conditions ◽  
Structural Integration ◽  
Thrust Reverser ◽  
Reverse Thrust

AbstractThis paper focuses on the design of a cascade within a cold stream thrust reverser during the early, conceptual stage of the product development process. A reliable procedure is developed for the exchange of geometric and load data between a two dimensional aerodynamic model and a three dimensional structural model. Aerodynamic and structural simulations are carried out using realistic operating conditions, for three different design configurations with a view to minimising weight for equivalent or improved aerodynamic and structural performance. For normal operational conditions the simulations show that total reverse thrust is unaffected when the performance of the deformed vanes is compared to the un-deformed case. This shows that for the conditions tested, the minimal deformation of the cascade vanes has no significant affect on aerodynamic efficiency and that there is scope for reducing the weight of the cascade. The pressure distribution through a two dimensional thrust reverser section is determined for two additional cascade vane configurations and it is shown that with a small decrease in total reverse thrust, it is possible to reduce weight and eliminate supersonic flow regimes through the nacelle section. By increasing vane sections in high pressure areas and decreasing sections in low pressure areas the structural performance of the cascade vanes in the weight reduced designs, is improved with significantly reduced levels of vane displacement and stress.

A Numerical Analysis of Phonation Using a Two-Dimensional Flexible Channel Model of the Vocal Folds

2001 ◽  
Vol 123 (6) ◽  
pp. 571-579 ◽  
Author(s):  
Tadashige Ikeda ◽  
Yuji Matsuzaki ◽  
Tatsuya Aomatsu
Keyword(s):  
Channel Model ◽  
Flow Direction ◽  
Speech Sound ◽  
Three Dimensional ◽  
Vocal Folds ◽  
Two Dimensional ◽  
Threshold Values ◽  
One Dimensional ◽  
Frequency Components ◽  
Main Flow Direction

A two-dimensional flexible channel model of the vocal folds coupled with an unsteady one-dimensional flow model is presented for an analysis of the mechanism of phonation. The vocal fold is approximated by springs and dampers distributed in the main flow direction that are enveloped with an elastic cover. In order to approximate three-dimensional collision of the vocal folds using the two-dimensional model, threshold values for the glottal width are introduced. The numerical results show that the collision plays an important role in speech sound, especially for higher resonant frequency components, because it causes the source sound to include high-frequency components.

CFD High L/D Riser Modeling Study

2007 ◽  
Author(s):  
Yiannis Constantinides ◽  
Owen H. Oakley ◽  
Samuel Holmes
Keyword(s):  
Fluid Flow ◽  
Computer Technology ◽  
Deep Water ◽  
Structural Model ◽  
Three Dimensional ◽  
Two Dimensional ◽  
Flow Simulations ◽  
Dimensional Flow ◽  
Two Dimensional Flow ◽  
Good Agreement

Fully three dimensional fluid flow simulations are used with a simple structural model to simulate very long risers. This method overcomes many shortcomings of methodologies based on two dimensional flow simulations and can correctly include the effects of three dimensional structures such as strakes, buoyancy modules and catenary riser shapes. The method is benchmarked against laboratory and offshore experiments with model risers of length to diameter ratios up to 4,000. RMS values of vortex induced vibration motions are shown to be in good agreement with measurements. The resources needed to model ultra deep water drilling and production risers are estimated based on current computer technology.

High Resolution Microscopy of Multi-Layered Biological Crystals

1982 ◽  
Vol 40 ◽  
pp. 80-83
Author(s):  
H.A. Cohen ◽  
T.W. Jeng ◽  
W. Chiu
Keyword(s):  
High Resolution ◽  
Low Dose ◽  
Three Dimensional ◽  
Data Interpretation ◽  
Two Dimensional ◽  
Biological Objects ◽  
Density Maps ◽  
Density Map ◽  
Complex Crystal ◽  
High Resolution Microscopy

This tutorial will discuss the methodology of low dose electron diffraction and imaging of crystalline biological objects, the problems of data interpretation for two-dimensional projected density maps of glucose embedded protein crystals, the factors to be considered in combining tilt data from three-dimensional crystals, and finally, the prospects of achieving a high resolution three-dimensional density map of a biological crystal. This methodology will be illustrated using two proteins under investigation in our laboratory, the T4 DNA helix destabilizing protein gp32*I and the crotoxin complex crystal.

Instrumentation For Quantitative Microscopy

1977 ◽  
Vol 35 ◽  
pp. 206-209
Author(s):  
B. Ralph ◽  
A.R. Jones
Keyword(s):  
Volume Fraction ◽  
Three Dimensional ◽  
Two Dimensional ◽  
Automatic Data ◽  
Phase Volume Fraction ◽  
Statistical Confidence ◽  
Resultant Data ◽  
Automatic Data Collection ◽  
Third Dimension ◽  
Evolution Of Microstructure

In all fields of microscopy there is an increasing interest in the quantification of microstructure. This interest may stem from a desire to establish quality control parameters or may have a more fundamental requirement involving the derivation of parameters which partially or completely define the three dimensional nature of the microstructure. This latter categorey of study may arise from an interest in the evolution of microstructure or from a desire to generate detailed property/microstructure relationships. In the more fundamental studies some convolution of two-dimensional data into the third dimension (stereological analysis) will be necessary.In some cases the two-dimensional data may be acquired relatively easily without recourse to automatic data collection and further, it may prove possible to perform the data reduction and analysis relatively easily. In such cases the only recourse to machines may well be in establishing the statistical confidence of the resultant data. Such relatively straightforward studies tend to result from acquiring data on the whole assemblage of features making up the microstructure. In this field data mode, when parameters such as phase volume fraction, mean size etc. are sought, the main case for resorting to automation is in order to perform repetitive analyses since each analysis is relatively easily performed.

A linearity test for thick specimens imaged by HVEM over a 180° angular range

1991 ◽  
Vol 49 ◽  
pp. 552-553
Author(s):  
Yu Liu
Keyword(s):  
Phase Contrast ◽  
Three Dimensional ◽  
Angular Range ◽  
Two Dimensional ◽  
Back Projection ◽  
Line Integral ◽  
Exponential Law ◽  
Transmission Electron ◽  
Absorption Law ◽  
Linearity Test

The image obtained in a transmission electron microscope is the two-dimensional projection of a three-dimensional (3D) object. The 3D reconstruction of the object can be calculated from a series of projections by back-projection, but this algorithm assumes that the image is linearly related to a line integral of the object function. However, there are two kinds of contrast in electron microscopy, scattering and phase contrast, of which only the latter is linear with the optical density (OD) in the micrograph. Therefore the OD can be used as a measure of the projection only for thin specimens where phase contrast dominates the image. For thick specimens, where scattering contrast predominates, an exponential absorption law holds, and a logarithm of OD must be used. However, for large thicknesses, the simple exponential law might break down due to multiple and inelastic scattering.

An Image Reconstruction System Applied to High Voltage Microscopy

1975 ◽  
Vol 33 ◽  
pp. 292-293
Author(s):  
D. E. Johnson
Keyword(s):  
High Voltage ◽  
Prior Information ◽  
Block Diagram ◽  
Three Dimensional ◽  
Real Space ◽  
Two Dimensional ◽  
Efficient Manner ◽  
Fourier Methods ◽  
Tilt Series ◽  
Methods Of Reconstruction

Increased specimen penetration; the principle advantage of high voltage microscopy, is accompanied by an increased need to utilize information on three dimensional specimen structure available in the form of two dimensional projections (i.e. micrographs). We are engaged in a program to develop methods which allow the maximum use of information contained in a through tilt series of micrographs to determine three dimensional speciman structure.In general, we are dealing with structures lacking in symmetry and with projections available from only a limited span of angles (±60°). For these reasons, we must make maximum use of any prior information available about the specimen. To do this in the most efficient manner, we have concentrated on iterative, real space methods rather than Fourier methods of reconstruction. The particular iterative algorithm we have developed is given in detail in ref. 3. A block diagram of the complete reconstruction system is shown in fig. 1.

Computer Assisted Image Reconstruction of Oligomer Structure

1976 ◽  
Vol 34 ◽  
pp. 472-473
Author(s):  
A.M. Jones ◽  
A. Max Fiskin
Keyword(s):  
Three Dimensional ◽  
Depth Of Field ◽  
Computer Assisted ◽  
Projection Data ◽  
Two Dimensional ◽  
Single Particles ◽  
Dimensional Reconstruction ◽  
Computer Assisted Image ◽  
The Fourier Transform ◽  
Space Approach

If the tilt of a specimen can be varied either by the strategy of observing identical particles orientated randomly or by use of a eucentric goniometer stage, three dimensional reconstruction procedures are available (l). If the specimens, such as small protein aggregates, lack periodicity, direct space methods compete favorably in ease of implementation with reconstruction by the Fourier (transform) space approach (2). Regardless of method, reconstruction is possible because useful specimen thicknesses are always much less than the depth of field in an electron microscope. Thus electron images record the amount of stain in columns of the object normal to the recording plates. For single particles, practical considerations dictate that the specimen be tilted precisely about a single axis. In so doing a reconstructed image is achieved serially from two-dimensional sections which in turn are generated by a series of back-to-front lines of projection data.

Polymorphic phase transition of a membrane protein - analysis of continuous diffuse electron diffraction intensity

1986 ◽  
Vol 44 ◽  
pp. 166-167
Author(s):  
Douglas L. Dorset ◽  
Andrew K. Massalski
Keyword(s):  
Molecular Sieve ◽  
Three Dimensional ◽  
Pore Geometry ◽  
Two Dimensional ◽  
Diffraction Intensity ◽  
Polymorphic Phase Transition ◽  
E Coli ◽  
Crystallographic Study ◽  
Hexagonal Form ◽  
Polymorphic Forms

Matrix porin, the ompF gene product of E. coli, has been the object of a electron crystallographic study of its pore geometry in an attempt to understand its function as a membrane molecular sieve. Three polymorphic forms have been found for two-dimensional crystals reconstituted in phospholipid, two hexagonal forms with different lipid content and an orthorhombic form coexisting with and similar to the hexagonal form found after lipid loss. In projection these have been shown to retain the same three-fold pore triplet geometry and analyses of three-dimensional data reveal that the small hexagonal and orthorhombic polymorphs have similar structure as well as unit cell spacings.

Sign in / Sign up

Export Citation Format

Share Document