scholarly journals Determination of two‐stroke engine exhaust noise by the method of characteristics

1979 ◽  
Vol 66 (S1) ◽  
pp. S79-S79
Author(s):  
Adrian D. Jones
Keyword(s):  
Method Of Characteristics ◽  
Engine Exhaust ◽  
The Method Of Characteristics ◽  
Exhaust Noise ◽  
Stroke Engine

Non-symmetric flow in Laval type nozzles

1972 ◽  
Vol 273 (1232) ◽  
pp. 185-235 ◽  
Keyword(s):  
Steady State ◽  
Combustion Chamber ◽  
Method Of Characteristics ◽  
Three Dimensions ◽  
Symmetric Flow ◽  
Gaseous Flow ◽  
The Method Of Characteristics ◽  
Lateral Forces

The equations of the steady state, compressible inviscid gaseous flow are linearized in a form suitable for application to nozzles of the Laval type. The procedure in the supersonic phase is verified by comparing solutions so obtained with those derived by the method of characteristics in two and three dimensions. Likewise, the solutions in the transonic phase are com pared with those obtained by other investigators. The linearized equation is then used to investigate the nat re of non-symmetric flow in rocket nozzles. It is found that if the flow from the combustion chamber into the nozzle is non-symmetric, the magnitude and direction of the turning couple produced by the emergent jet is dependent on the profile of the nozzle and it is possible to design profiles such that the turning couples or lateral forces are zero. The optimum nozzle so designed is independent of the pressure and also of the magnitude of the non-symmetry of the entry flow. The formulae by which they are obtained have been checked by extensive static and projection tests with simulated rocket test vehicles which are described in this paper.

Boundary Layer Closure and Heat Transfer in Constant Base Pressure and Simple Wave Guns

1978 ◽  
Vol 100 (4) ◽  
pp. 690-696 ◽  
Author(s):  
A. D. Anderson ◽  
T. J. Dahm
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Layer Thickness ◽  
Boundary Layer Thickness ◽  
Method Of Characteristics ◽  
Simple Wave ◽  
Momentum Equation ◽  
Base Pressure ◽  
Two Dimensional ◽  
The Method Of Characteristics

Solutions of the two-dimensional, unsteady integral momentum equation are obtained via the method of characteristics for two limiting modes of light gas launcher operation, the “constant base pressure gun” and the “simple wave gun”. Example predictions of boundary layer thickness and heat transfer are presented for a particular 1 in. hydrogen gun operated in each of these modes. Results for the constant base pressure gun are also presented in an approximate, more general form.

Sign in / Sign up

Export Citation Format

Share Document