A stochastic convolution/superposition method with isocenter sampling to evaluate intrafraction motion effects in IMRT

2005 ◽  
Vol 32 (4) ◽  
pp. 1156-1163 ◽  
Author(s):  
Shahid A. Naqvi ◽  
Warren D. D'Souza
Keyword(s):  
Superposition Method ◽  
Stochastic Convolution ◽  
Intrafraction Motion

Structure Sensitivity Analysis and Dynamic Performance Optimization of Marine Gearbox

2017 ◽  
Author(s):  
Tengjiao Lin ◽  
Daokun Xie ◽  
Ziran Tan ◽  
Bo Liu
Keyword(s):  
Sensitivity Analysis ◽  
Performance Optimization ◽  
Optimization Design ◽  
Dynamic Performance ◽  
Structure Sensitivity ◽  
Superposition Method ◽  
Structure Parameters ◽  
Analysis Model ◽  
Vibration Acceleration ◽  
Response Optimization

The aim of this paper is to investigate the influence of structure parameters on the vibration characteristics and improve the dynamic performance of marine gearbox. A finite element model was established to solve the dynamic response by using modal superposition method. Based on the theory of multi-objective optimization design, the structure sensitivity analysis model of marine gearbox was established, which takes the structure parameters of the housing as design variables. The modal and response sensitivity was obtained by using the optimal gradient method. According to the results of sensitivity analysis, a modal and response optimization model of marine gearbox was established. The objective was to avoid natural frequencies from the excitation frequencies and minimize the root mean square of vibration acceleration of the evaluating points on the surface of housing. Then the modal optimization and response optimization of gearbox were carried out by using zero-order and first-order optimization method. The results indicate that the dynamic optimization of the gearbox can be achieved. After optimization, the amplitude of vibration acceleration of the evaluating points on the housing surface has been reduced and the resonance of marine gearbox can be avoided.

Shear response of steel fiber reinforced recycled concrete-filled steel tube columns

2021 ◽  
pp. 136943322110093
Author(s):  
Zhenzhen Liu ◽  
Yiyan Lu ◽  
Shan Li ◽  
Jiancong Liao
Keyword(s):  
Axial Compression ◽  
Steel Fiber ◽  
Steel Tube ◽  
Shear Capacity ◽  
Recycled Concrete ◽  
Recycled Aggregate ◽  
Superposition Method ◽  
Fiber Reinforced ◽  
Concrete Filled Steel Tube ◽  
Shear Span

A comprehensive study of the shear characteristics of steel fiber reinforced recycled concrete-filled steel tube (SRCFST) columns is conducted. 50 CFST stub columns are tested with the variables of steel tube diameter-thickness ratio ( D/t), shear span-to-depth ratio (λ), axial compression ratio ( n), and concrete mix. Two types of cements, three recycled aggregate percentages, three water-cement ratios, and three steel fiber contents are considered in design of concrete mixes. The experimental results show that SRCFST columns present the coincident shear behavior of the ordinary CFST columns. As λ is increased, shear resistance shows a downtrend, while the flexural strength presents an increasing trend. Imposing axial compression or thickening steel tube contributes to an adequate safety margin in plastic period. Based on the contributions superposition method, a predicted model of the shear capacity of SRCFST columns is proposed in consideration of shear-span ratio, axial compression, and self-stress.

scholarly journals Transient Response of Bridge Piers to Structure Separation under Near-Fault Vertical Earthquake

2021 ◽  
Vol 11 (9) ◽  
pp. 4068
Author(s):  
Wenjun An ◽  
Guquan Song
Keyword(s):  
Large Scale ◽  
Bending Moment ◽  
Relative Displacement ◽  
Superposition Method ◽  
Longitudinal Displacement ◽  
Transient Wave ◽  
Vibration Period ◽  
Vertical Excitation ◽  
Mode Superposition Method ◽  
Main Girder

Given the possible separation problem caused by the double-span continuous beam bridge under the action of the vertical earthquake, considering the wave effect, the transient wave characteristic function method and the indirect mode superposition method are used to solve the response theory of the bridge structure during the earthquake. Through the example analysis, the pier bending moment changes under different vertical excitation periods and excitation amplitudes are calculated. Calculations prove that: (1) When the seismic excitation period is close to the vertical natural vibration period of the bridge, the main girder and the bridge pier may be separated; (2) When the pier has a high height, the separation has a more significant impact on the longitudinal displacement of the bridge, but the maximum relative displacement caused by the separation is random; (3) Large-scale vertical excitation will increase the number of partitions of the structure, and at the same time increase the vertical collision force between the main girder and the pier, but the effect on the longitudinal displacement of the form is uncertain; (4) When V/H exceeds a specific value, the pier will not only be damaged by bending, but will also be damaged by axial compression.

scholarly journals Structural and Acoustic Responses of a Submerged Stiffened Conical Shell

2014 ◽  
Vol 2014 ◽  
pp. 1-14 ◽  
Author(s):  
Meixia Chen ◽  
Cong Zhang ◽  
Xiangfan Tao ◽  
Naiqi Deng
Keyword(s):  
Conical Shell ◽  
Element Model ◽  
Analytical Models ◽  
Superposition Method ◽  
Far Field ◽  
Fluid Loading ◽  
Low Frequencies ◽  
Structural Responses ◽  
The Individual ◽  
Field Sound

This paper studies the vibrational behavior and far-field sound radiation of a submerged stiffened conical shell at low frequencies. The solution for the dynamic response of the conical shell is presented in the form of a power series. A smeared approach is used to model the ring stiffeners. Fluid loading is taken into account by dividing the conical shell into narrow strips which are considered to be local cylindrical shells. The far-field sound pressure is solved by the Element Radiation Superposition Method. Excitations in two directions are considered to simulate the loading on the surface of the conical shell. These excitations are applied along the generator and normal to the surface of the conical shell. The contributions from the individual circumferential modes on the structural responses of the conical shell are studied. The effects of the external fluid loading and stiffeners are discussed. The results from the analytical models are validated by numerical results from a fully coupled finite element/boundary element model.

scholarly journals Multi-function scattering beam regulation based on the superposition method of geometric phase coded metasurface sequences

2021 ◽  
pp. 127405
Author(s):  
Yiyun Li ◽  
Bo Fang ◽  
Yongxing Jin ◽  
Lijiang Shi ◽  
Chenxia Li ◽  
...  
Keyword(s):  
Geometric Phase ◽  
Superposition Method

scholarly journals Numerical Analysis of Structure Acoustic Radiation Based on Wave Superposition Method

2011 ◽  
Vol 2-3 ◽  
pp. 733-738
Author(s):  
Sheng Yao Gao ◽  
De Shi Wang ◽  
Yi Qun Du
Keyword(s):  
Integral Equation ◽  
Acoustic Field ◽  
Acoustic Radiation ◽  
Boundary Surface ◽  
Impact Factors ◽  
Power Calculation ◽  
Superposition Method ◽  
Sound Power ◽  
Wave Superposition ◽  
Equivalent Sources

To overcome the non-uniqueness of solution at eigenfrequencies in the boundary integral equation method for structural acoustic radiation, wave superposition method is introduced to study the acoustics characteristics including acoustic field reconstruction and sound power calculation. The numerical method is implemented by using the acoustic field from a series of virtual sources which are collocated near the boundary surface to replace the acoustic field of the radiator, namely the principle of equivalent. How to collocate these equivalent sources is not indicated definitely. Once wave superposition method is applied to sound power calculation, it is necessary to evaluate its accuracy and impact factors. In the paper, the basic principle of wave superposition method is described, and then the integral equation is discretized. Also, the impact factors including element numbers, frequency limitation, and distance between virtual source and integral surface are analyzed in the process of calculate the acoustic radiation from the simply supported thin plate under concentrated force. The extensive measures of acoustic field at the thin plate are compared with results obtain using different numerical methods. The results show that: (a) The agreement between the results from the above numerical methods is excellent. The wave superposition method requires fewer elements and hence is faster. But the extensive numerical modeling suggests that as long as the volume velocity matching yields more than adequate accuracy. (b) The equivalent sources should be collocated inside the radiator. And the accuracy of a given Gauss integration formula will decrease as the source approaches the boundary surface. (c) The numerical method is applicable to the acoustic radiation of structure with complicated shape. (d) The method described in this paper can be used to perform effectively sound power calculation, and its application range can be extended on the basis of these conclusions.

Three-Dimensional Green’s Functions in Anisotropic Elastic Bimaterials With Imperfect Interfaces

2003 ◽  
Vol 70 (2) ◽  
pp. 180-190 ◽  
Author(s):  
E. Pan
Keyword(s):  
Green's Functions ◽  
Green’S Functions ◽  
Three Dimensional ◽  
Imperfect Interface ◽  
Boundary Integral ◽  
Stress Fields ◽  
Superposition Method ◽  
Interface Conditions ◽  
Complementary Part ◽  
Anisotropic Elastic

In this paper, three-dimensional Green’s functions in anisotropic elastic bimaterials with imperfect interface conditions are derived based on the extended Stroh formalism and the Mindlin’s superposition method. Four different interface models are considered: perfect-bond, smooth-bond, dislocation-like, and force-like. While the first one is for a perfect interface, other three models are for imperfect ones. By introducing certain modified eigenmatrices, it is shown that the bimaterial Green’s functions for the three imperfect interface conditions have mathematically similar concise expressions as those for the perfect-bond interface. That is, the physical-domain bimaterial Green’s functions can be obtained as a sum of a homogeneous full-space Green’s function in an explicit form and a complementary part in terms of simple line-integrals over [0,π] suitable for standard numerical integration. Furthermore, the corresponding two-dimensional bimaterial Green’s functions have been also derived analytically for the three imperfect interface conditions. Based on the bimaterial Green’s functions, the effects of different interface conditions on the displacement and stress fields are discussed. It is shown that only the complementary part of the solution contributes to the difference of the displacement and stress fields due to different interface conditions. Numerical examples are given for the Green’s functions in the bimaterials made of two anisotropic half-spaces. It is observed that different interface conditions can produce substantially different results for some Green’s stress components in the vicinity of the interface, which should be of great interest to the design of interface. Finally, we remark that these bimaterial Green’s functions can be implemented into the boundary integral formulation for the analysis of layered structures where imperfect bond may exist.

Dynamic Analysis of Planetary Gear Reducer

2018 ◽  
Vol 880 ◽  
pp. 87-92
Author(s):  
Daniela Vintilă ◽  
Laura Diana Grigorie ◽  
Alina Elena Romanescu
Keyword(s):  
Finite Elements ◽  
Differential Equations ◽  
Dynamic Analysis ◽  
Frequency Response ◽  
Planetary Gear ◽  
Resonance Phenomenon ◽  
Superposition Method ◽  
Planetary Gears ◽  
Tower Crane ◽  
Systems Of Differential Equations

This paper presents dynamic analysis of a three stage planetary gear reducer for operate a tower crane. Ordinary and planetary gears have been designed respecting the coaxial, neighboring and mounting conditions. Harmonic analysis has been processed to identify frequency response for displacements, strains and deformations. The aim of the study was to determine critical frequencies to avoid mechanical resonance phenomenon. The obtained results are based on the superposition method for solving the systems of differential equations resulting from the analysis with finite elements.

Sign in / Sign up

Export Citation Format

Share Document