Influence of x-ray pulse parameters on the image quality for moving objects in digital cardiac imaging

2004 ◽  
Vol 31 (10) ◽  
pp. 2819-2825 ◽  
Author(s):  
Eduardo Guibelalde ◽  
Eliseo Vano ◽  
Francisco Vaquero ◽  
Luciano González
Keyword(s):  
Image Quality ◽  
Cardiac Imaging ◽  
Moving Objects ◽  
X Ray ◽  
Pulse Parameters

scholarly journals Real-time algorithm for Poissonian noise reduction in low-dose fluoroscopy: performance evaluation

2019 ◽  
Vol 18 (1) ◽  
Author(s):  
A. Sarno ◽  
E. Andreozzi ◽  
D. De Caro ◽  
G. Di Meo ◽  
A. G. M. Strollo ◽  
...  
Keyword(s):  
Image Quality ◽  
Real Time ◽  
Video Processing ◽  
Moving Objects ◽  
Quantum Noise ◽  
Moving Average ◽  
Threshold Level ◽  
Computational Time ◽  
X Ray ◽  
Mask Size

Abstract Background Quantum noise intrinsically limits the quality of fluoroscopic images. The lower is the X-ray dose the higher is the noise. Fluoroscopy video processing can enhance image quality and allows further patient’s dose lowering. This study aims to assess the performances achieved by a Noise Variance Conditioned Average (NVCA) spatio-temporal filter for real-time denoising of fluoroscopic sequences. The filter is specifically designed for quantum noise suppression and edge preservation. It is an average filter that excludes neighborhood pixel values exceeding noise statistic limits, by means of a threshold which depends on the local noise standard deviation, to preserve the image spatial resolution. The performances were evaluated in terms of contrast-to-noise-ratio (CNR) increment, image blurring (full width of the half maximum of the line spread function) and computational time. The NVCA filter performances were compared to those achieved by simple moving average filters and the state-of-the-art video denoising block matching-4D (VBM4D) algorithm. The influence of the NVCA filter size and threshold on the final image quality was evaluated too. Results For NVCA filter mask size of 5 × 5 × 5 pixels (the third dimension represents the temporal extent of the filter) and a threshold level equal to 2 times the local noise standard deviation, the NVCA filter achieved a 10% increase of the CNR with respect to the unfiltered sequence, while the VBM4D achieved a 14% increase. In the case of NVCA, the edge blurring did not depend on the speed of the moving objects; on the other hand, the spatial resolution worsened of about 2.2 times by doubling the objects speed with VBM4D. The NVCA mask size and the local noise-threshold level are critical for final image quality. The computational time of the NVCA filter was found to be just few percentages of that required for the VBM4D filter. Conclusions The NVCA filter obtained a better image quality compared to simple moving average filters, and a lower but comparable quality when compared with the VBM4D filter. The NVCA filter showed to preserve edge sharpness, in particular in the case of moving objects (performing even better than VBM4D). The simplicity of the NVCA filter and its low computational burden make this filter suitable for real-time video processing and its hardware implementation is ready to be included in future fluoroscopy devices, offering further lowering of patient’s X-ray dose.

scholarly journals Image quality based x-ray dose control in cardiac imaging

2015 ◽  
Author(s):  
Andrew G. Davies ◽  
Stephen M. Kengyelics ◽  
Amber J. Gislason-Lee
Keyword(s):  
Image Quality ◽  
Cardiac Imaging ◽  
X Ray ◽  
Dose Control

Image Quality Analysis of X-ray Grating Interferometer Using Integrating-bucket Method

2020 ◽  
Vol 64 (2) ◽  
pp. 20503-1-20503-5
Author(s):  
Faiz Wali ◽  
Shenghao Wang ◽  
Ji Li ◽  
Jianheng Huang ◽  
Yaohu Lei ◽  
...  
Keyword(s):  
Image Quality ◽  
Phase Contrast ◽  
Quality Analysis ◽  
Phase Contrast Imaging ◽  
Phase Image ◽  
Contrast Imaging ◽  
High Quality ◽  
Image Quality Analysis ◽  
X Ray ◽  
Grating Interferometer

Abstract Grating-based x-ray phase-contrast imaging has the potential to enhance image quality and provide inner structure details non-destructively. In this work, using grating-based x-ray phase-contrast imaging system and employing integrating-bucket method, the quantitative expressions of signal-to-noise ratios due to photon statistics and mechanical error are analyzed in detail. Photon statistical noise and mechanical error are the main sources affecting the image noise in x-ray grating interferometry. Integrating-bucket method is a new phase extraction method translated to x-ray grating interferometry; hence, its image quality analysis would be of great importance to get high-quality phase image. The authors’ conclusions provide an alternate method to get high-quality refraction signal using grating interferometer, and hence increases applicability of grating interferometry in preclinical and clinical usage.

scholarly journals Correlation of image quality parameters with tube voltage in X-ray dark-field chest radiography: a phantom study

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Andreas P. Sauter ◽  
Jana Andrejewski ◽  
Manuela Frank ◽  
Konstantin Willer ◽  
Julia Herzen ◽  
...  
Keyword(s):  
Image Quality ◽  
Imaging Modality ◽  
Signal Strength ◽  
Dark Field ◽  
Tube Voltage ◽  
X Ray ◽  
Dose Area Product ◽  
Dark Field Imaging ◽  
Field Imaging

AbstractGrating-based X-ray dark-field imaging is a novel imaging modality with enormous technical progress during the last years. It enables the detection of microstructure impairment as in the healthy lung a strong dark-field signal is present due to the high number of air-tissue interfaces. Using the experience from setups for animal imaging, first studies with a human cadaver could be performed recently. Subsequently, the first dark-field scanner for in-vivo chest imaging of humans was developed. In the current study, the optimal tube voltage for dark-field radiography of the thorax in this setup was examined using an anthropomorphic chest phantom. Tube voltages of 50–125 kVp were used while maintaining a constant dose-area-product. The resulting dark-field and attenuation radiographs were evaluated in a reader study as well as objectively in terms of contrast-to-noise ratio and signal strength. We found that the optimum tube voltage for dark-field imaging is 70 kVp as here the most favorable combination of image quality, signal strength, and sharpness is present. At this voltage, a high image quality was perceived in the reader study also for attenuation radiographs, which should be sufficient for routine imaging. The results of this study are fundamental for upcoming patient studies with living humans.

The Effect of X-Ray Spectra from Molybdenum and Tungsten Target Tubes on Image Quality in Mammography

Radiology ◽  
1976 ◽  
Vol 118 (3) ◽  
pp. 705-709 ◽  
Author(s):  
Arthur G. Haus ◽  
Charles E. Metz ◽  
John T. Chiles ◽  
Kurt Rossmann
Keyword(s):  
Image Quality ◽  
X Ray ◽  
Tungsten Target ◽  
And Tungsten

Using 100- instead of 120-kVp computed tomography to diagnose pulmonary embolism almost halves the radiation dose with preserved diagnostic quality

2010 ◽  
Vol 51 (3) ◽  
pp. 260-270 ◽  
Author(s):  
Peter Björkdahl ◽  
Ulf Nyman
Keyword(s):  
Computed Tomography ◽  
Pulmonary Embolism ◽  
Image Quality ◽  
Radiation Dose ◽  
Effective Dose ◽  
Ct Number ◽  
Subjective Image Quality ◽  
Diagnostic Quality ◽  
X Ray ◽  
Tube Potential

Background: Concern has been raised regarding the mounting collective radiation doses from computed tomography (CT), increasing the risk of radiation-induced cancers in exposed populations. Purpose: To compare radiation dose and image quality in a chest phantom and in patients for the diagnosis of pulmonary embolism (PE) at 100 and 120 peak kilovoltage (kVp) using 16-multichannel detector computed tomography (MDCT). Material and Methods: A 20-ml syringe containing 12 mg I/ml was scanned in a chest phantom at 100/120 kVp and 25 milliampere seconds (mAs). Consecutive patients underwent 100 kVp ( n = 50) and 120 kVp ( n = 50) 16-MDCT using a “quality reference” effective mAs of 100, 300 mg I/kg, and a 12-s injection duration. Attenuation (CT number), image noise (1 standard deviation), and contrast-to-noise ratio (CNR; fresh clot = 70 HU) of the contrast medium syringe and pulmonary arteries were evaluated on 3-mm-thick slices. Subjective image quality was assessed. Computed tomography dose index (CTDIvol) and dose–length product (DLP) were presented by the CT software, and effective dose was estimated. Results: Mean values in the chest phantom and patients changed as follows when X-ray tube potential decreased from 120 to 100 kVp: attenuation +23% and +40%, noise +38% and +48%, CNR −6% and 0%, and CTDIvol −38% and −40%, respectively. Mean DLP and effective dose in the patients decreased by 42% and 45%, respectively. Subjective image quality was excellent or adequate in 49/48 patients at 100/120 kVp. No patient with a negative CT had any thromboembolism diagnosed during 3-month follow-up. Conclusion: By reducing X-ray tube potential from 120 to 100 kVp, while keeping all other scanning parameters unchanged, the radiation dose to the patient may be almost halved without deterioration of diagnostic quality, which may be of particular benefit in young individuals.

Sign in / Sign up

Export Citation Format

Share Document