A low voltage deformable mirror using ionic-polymer metal composite

2010 ◽  
Author(s):  
Hsiang-Chun Wei ◽  
Guo-Dung John Su
Keyword(s):  
Low Voltage ◽  
Deformable Mirror ◽  
Metal Composite ◽  
Ionic Polymer Metal Composite ◽  
Ionic Polymer ◽  
Polymer Metal

Biomimetic Applications of Ionic Polymer Metal Composites (IPMC) Actuators - A Critical Review

2014 ◽  
Vol 20 ◽  
pp. 1-10 ◽  
Author(s):  
Muhammad Farid ◽  
Zhao Gang ◽  
Tran Linh Khuong ◽  
Zhuang Zhi Sun ◽  
Naveed Ur Rehman ◽  
...  
Keyword(s):  
Critical Review ◽  
Low Voltage ◽  
Metal Composite ◽  
Ionic Polymer Metal Composite ◽  
Metal Composites ◽  
Ionic Polymer Metal Composites ◽  
Ionic Polymer ◽  
Design And Manufacturing ◽  
Polymer Metal ◽  
Biomedical Field

Biomimetic is the field of engineering in which biological creatures and their functions are investigated and are used as the basis for the design and manufacturing of machines. Ionic Polymer Metal Composite (IPMC) is a smart material which has demonstrated a meaningful bending and tip force after the application of a low voltage. It is light-weighted, flexible, easily actuated, multi-directional applicable and requires simple manufacturing. Resultantly, IPMC has attracted scientists and researchers to analyze it further and consider it for any industrial and biomimetic applications. Presently, the research on IPMC is bi-directional oriented. A few groups of researchers are busy to find out the causes for the weaknesses of the material and to find out any remedy for them. The second class of scientists is exploring new areas of applications where IPMC material can be used. Although, the application zone of IPMC is ranging from micropumps diaphragms to surgical holding devices, this paper provides an overview of the IPMC application in biomimetic and biomedical field.

Integral multiple models online identifier applied to ionic polymer–metal composite actuator

2018 ◽  
Vol 29 (14) ◽  
pp. 2863-2873 ◽  
Author(s):  
Jakub Bernat ◽  
Jakub Kolota
Keyword(s):  
Smart Materials ◽  
Low Voltage ◽  
Feedback Gain ◽  
Multiple Models ◽  
Metal Composite ◽  
Ionic Polymer Metal Composite ◽  
Metal Composites ◽  
Ionic Polymer Metal Composites ◽  
Ionic Polymer ◽  
Polymer Metal

Ionic polymer–metal composites are classified as a smart materials group, whose properties can be designed depending on the needs that arise. Ionic polymer–metal composites belong to the class of wet electroactive polymers. They are promising candidates actuator for various potential applications mainly due to their flexible, low voltage requirements, compact design, and lack of moving parts. However, being a widely used material in industry, ionic polymer–metal composite requires complex control methods due to its strongly nonlinear nature. An important prerequisite for an intelligent controller is the ability to adapt rapidly to any unknown operating environment. This article presents a novel approach to tuning multiple models of an online identifier by integral mapping. Through the extension of the estimation law of additional mapping between parameters and measurable signals, we significantly improve transient responses without increasing feedback gain. The authors measured the moisture content of ionic polymer–metal composite and consider in the experiment relationship between drying and varying of curvature output. The effectiveness of the proposed multiple models adaptive control strategy was verified in various experiments. The results of the study illustrated in the experiments show that adding new mapping improves not only the transients of controlled plant, but also increases the performance indexes of adaptive system.

Sulfonated polystyrene-based ionic polymer–metal composite (IPMC) actuator

2011 ◽  
Vol 17 (1) ◽  
pp. 49-55 ◽  
Author(s):  
Mohammad Luqman ◽  
Jang-Woo Lee ◽  
Kwang-Kil Moon ◽  
Young-Tai Yoo
Keyword(s):  
Metal Composite ◽  
Ionic Polymer Metal Composite ◽  
Sulfonated Polystyrene ◽  
Ionic Polymer ◽  
Polymer Metal

Fabrication of Ionic Polymer Metal Composite Actuator with Palladium Electrodes and Evaluation of its Bending Response

2009 ◽  
Vol 1190 ◽  
Author(s):  
Takuma Kobayashi ◽  
Takeshi Kuribayashi ◽  
Masaki Omiya
Keyword(s):  
Electric Field ◽  
Sample Length ◽  
Metal Composite ◽  
Ionic Polymer Metal Composite ◽  
Ionic Polymer ◽  
Palladium Electrode ◽  
Wide Range ◽  
Polymer Metal ◽  
Bending Response ◽  
Tip Displacement

AbstractWe built up the way of fabricating IPMC actuator with palladium electrodes and we found that it showed large bending response than Au-plated IPMC actuator. An ionic polymer-metal composite (IPMC) consisting of a thin perfuorinated ionomer membrane, electrodes plated on both faces, undergoes large bending motion when a small electric field is applied across its thickness in a hydrated state. The characteristics of IPMC are ease of miniaturization, low density, and mechanical flexibility. Therefore, it is considered to have a wide range of applications from MEMS sensor to artificial muscle. However, there are problems on IPMC. First, its mechanical and electric characteristics have not been clarified because of the complex mechanism of the deformation. Second, it is high-priced because most of IPMC actuators use gold or platinum as electrodes. In order for IPMC actuator to be widely put to practical use, we should solve these problems. Hence, this research focuses on fabrication of IPMC actuator with palladium electrode, which is cheaper than gold or platinum, and evaluation of its mechanical properties such as its tip displacement. We fabricated IPMC consisting of a thin Nafion® membrane, which is the film with fluorocarbon back-bones and mobile cations, sandwiched between two thin palladium plates. The surface resistivity was 2.88±0.18Ω/sq., so it could be said to be enough small. Then, we observed its cross section by using FE-SEM. As a result, palladium plates were evenly coated and its thickness was about 30μm. Also, we carried out an actuation test for two kinds of IPMCs: one was fabricated by using Nafion®117 (thickness 183μm), the other was by Nafion®115 (thickness 127μm). In this test, the relationship between voltage (0˜4V) across its thickness and tip displacement for the cantilevered strip of the IPMC was measured. Then we found that IPMCs showed large bending motion under a low electric field. When Nafion®117 sample was subjected to voltage of 1.5V, the ratio of the tip displacement to the sample length was 0.35, which was lager bending than Au-plated IPMC actuator, whose ratio of the tip displacement to the sample length was 0.12 [1]. When Nafion®115 sample was applied to 1.5V, the ratio of the tip displacement to the sample length was 0.22. Then, we found that Nafion®117 bended in a larger way than Nafion®115. Reference [1]Sia Nemat-Nesser and Yongxian Wu,”Comparative experimental study of ionic polymer-metal composites with different backbone ionomers and in various cation forms”, Journal of Applied Physics,93,5255 (2003)

Sign in / Sign up

Export Citation Format

Share Document