Extended dynamic range of ultra-high speed gated microchannel plate for x-ray framing camera

2009 ◽  
Author(s):  
Jingsheng Pan ◽  
Jingwen Lv ◽  
Zhurong Cao ◽  
Shenye Liu ◽  
Shulin Liu ◽  
...  
2016 ◽  
Vol 37 (2) ◽  
pp. 172-176 ◽  
Author(s):  
Xie Hongbo ◽  
Xu Mengmeng ◽  
Gong Yanxia ◽  
Fang Chunlun ◽  
Jiang Min ◽  
...  

2020 ◽  
Author(s):  
Emilio M. Escauriza ◽  
Joao P. Duarte ◽  
David J. Chapman ◽  
Lukasz Farbaniec ◽  
John C. Jonsson ◽  
...  

2008 ◽  
Author(s):  
Ken Moy ◽  
Ming Wu ◽  
Craig Kruschwitz ◽  
Aric Tibbitts ◽  
Matt Griffin ◽  
...  

2021 ◽  
Vol 250 ◽  
pp. 01014
Author(s):  
Bratislav Lukić ◽  
Maria Blasone ◽  
Yannick Duplan ◽  
Pascal Forquin ◽  
Emilio Escauriza ◽  
...  

In this work the dynamic fracturing of an ultra-high strength cementitious material is probed with in-situ ultra-high speed X-ray phase-contrast diagnostics to investigate the phenomenology of dynamic fracture. Gas gun experiments were conducted on two characteristic samples with two different impact speeds, namely 80 and 190 m/s using the edge-on impact test configuration. The samples were placed within the intense X-ray beam providing an observation field of 12.8 mm in width and 8 mm in height. Thanks to equispaced 16 bunches of short X-ray pulses, the samples were imaged through an indirect detector arrangement using the Shimadzu HPV-X2 camera lens-coupled to a fast scintillator capturing through-thickness measurements with an interframe time of 1.06 µs. The comparison of fragmentation patterns between two samples revealed an important insight into velocity dependant spall formation as well as the effects of crack closure and bridging.


1993 ◽  
Vol 37 ◽  
pp. 145-151
Author(s):  
N. Loxley ◽  
S. Cockerton ◽  
B. K. Tanner

AbstractWe show that a very low noise, high dynamic range scintillation detector has major advantages over conventional detectors for characterization of pseudomorphic HEMT structures by high resolution X-ray diffraction. We show that the reduced background enables a second modulation period to be detected, enabling the thickness and composition to be determined independently. Using a conventional X-ray generator and diffractometer we demonstrate that, in a single scan taking only 10 seconds, we are able to obtain sufficiently good data to provide quality assurance.


Sign in / Sign up

Export Citation Format

Share Document