A graphical user interface for real-time spectroscopy: software architecture for data collection, feature extraction, model development, and real-time testing

2009 ◽  
Author(s):  
Peter Torrione ◽  
Kenneth Morton, Jr. ◽  
Chris Lunsford ◽  
Leslie Collins
Keyword(s):  
Feature Extraction ◽  
User Interface ◽  
Data Collection ◽  
Software Architecture ◽  
Real Time ◽  
Graphical User Interface ◽  
Model Development ◽  
Extraction Model

scholarly journals Development of mobile robot for measuring distance using optical quadrature encoder

2020 ◽  
Vol 18 (2) ◽  
pp. 745
Author(s):  
Madiha Zahari ◽  
NurliyanaAbd Mutalib ◽  
Nurnadia Natasya Affendi ◽  
N. Hashim ◽  
D. A. Hadi ◽  
...  
Keyword(s):  
User Interface ◽  
Data Collection ◽  
Mobile Robot ◽  
Graphical User Interface ◽  
Accurate Result ◽  
Measuring System ◽  
Accuracy And Precision ◽  
Measuring Tape ◽  
Measuring Tool ◽  
Multiple Conditions

<span>This paper describes the design and development of a measuring tool using a mobile robot. At present, contractors are measuring distances using measuring tape which has few limitations. This includes using of another manpower or a marking flag. The Robot Measuring System is designed to measure distances at multiple conditions such as smooth and rough surface. An optical quadrature encoder is used as a sensor to measure the distances while a program is installed in Arduino Uno for reading and data collection. Graphical User Interface (GUI) was created using Android software so that the movement of the robot can be controlled using a smartphone within a Bluetooth range. An experiment was conducted to test the reliability in terms of accuracy and precision. The best accuracy and precision were obtained when the robot speed is at 90 cm/s on the plain tiles, 80 cm/s on the tar road and 90 cm/s on the grass surface. The robot speed needs to be adjusted accordingly based on the surfaces in order to get an accurate result. <br /> This paper proved that the robot measuring system was successfully designed, implemented and analyzed.</span>

Concurrency Control in Real-Time E-Collaboration Systems

2009 ◽  
pp. 211-218
Author(s):  
Wenbing Zhao
Keyword(s):  
User Interface ◽  
System Design ◽  
Real Time ◽  
Graphical User Interface ◽  
Concurrency Control ◽  
Wide Area ◽  
Wide Area Networks ◽  
System State ◽  
Decentralized System ◽  
Tightly Coupled

For all e-collaboration systems, some degree of concurrency control is needed so that two people do not step on each other’s foot. The demand for good concurrency control is especially high for the tightly coupled, real-time e-collaboration systems. Such systems require quick responses to user’s actions, and typically require a WYSIWIS (what you see is what I see) graphical user interface (Ellis, Gibbs, & Rein, 1991). This requirement, together with the fact that users are often separated geographically across wide-area networks, favors a decentralized system design where the system state is replicated at each user’s site. This places further challenges on the design of concurrency control for these systems.

scholarly journals An IoT Enabled Worker Safety System Using Gas and Temperature System

2019 ◽  
pp. 139-143
Author(s):  
Divyesh Patel ◽  
Arpita Shah ◽  
Hetal Shah
Keyword(s):  
User Interface ◽  
Real Time ◽  
Graphical User Interface ◽  
Temperature Sensors ◽  
Safety System ◽  
Worker Safety ◽  
Usb Interface ◽  
Points Of Interest ◽  
Time Position ◽  
Arduino Microcontroller

This paper aims to build up a model for an online remote gas and temperature checking device for worker’s safety in sewage pipelines. The device is WSN based microcontroller equipped with analog and digital sensor. The design included several units mainly: Arduino Microcontroller MQ-135, DHT11, Gas and Temperature Sensors, and the current regulator circuit. The sensors are connected with a microcontroller through an ADC for advanced flag change and information logging. An LCD show is likewise associated with the microcontroller to show the estimations. For examination and filing purposes, the information can be exchanged to a PC with a graphical UI program through a USB interface. The device displays toxic gas and workers real-time position, transmit information remotely via a graphical user interface to IBM bluemix provide adjacent help. By keeps observing, this model will prone to diminish mishaps and slowly spares an existence. The model has numerous points of interest when contrasted with other checking frameworks as far as its littler size, gigantic memory limits, on-gadget show, bring down cost and more noteworthy versatility.

scholarly journals Cell-Free DNA Pattern Identification and its Classification using Convolution Neural Network

2019 ◽  
Vol 9 (1) ◽  
pp. 5362-5364
Keyword(s):  
Neural Network ◽  
Feature Extraction ◽  
User Interface ◽  
Graphical User Interface ◽  
Probabilistic Method ◽  
Convolution Neural Network ◽  
Image Feature ◽  
Image Feature Extraction ◽  
Free Dna ◽  
Dna Pattern

Circulating cell DNA (cfDNA) design identification assumes a cardinal job in fetal drug, transplantation and oncology. Be that as it may, it has additionally demonstrated to be a biomarker for different maladies. There are numerous order strategies by which the acknowledgment and arrangement should be possible. So as to have a superior time unpredictability and improve the precision further, this strategy targets distinguishing and arranging the general DNA examples and ailments related with them utilizing cfDNA Images in a Convolution Neural Network. A probabilistic method is used for cfDNA image feature extraction, fragmentation and interpretation. Graphical User Interface is the platform where this method is employed since it uses visual indicators in place of text-based interface. The aftereffects of this test demonstrate that the Convolution Neural Network calculation can perceive cfDNA successions accurately and successfully with no dubiety. Prepared with examples, the CNN can effectively characterize the picture surrendered to coordinated and unparalleled examples with numerical highlights.

scholarly journals AMi: a GUI-based, open-source system for imaging samples in multi-well plates

2019 ◽  
Vol 75 (8) ◽  
pp. 531-536 ◽  
Author(s):  
Andrew Bohm
Keyword(s):  
User Interface ◽  
Open Source ◽  
Real Time ◽  
Graphical User Interface ◽  
Field Enhancement ◽  
Depth Of Field ◽  
Raspberry Pi ◽  
Real Time Imaging ◽  
Translation Stage ◽  
Multiple Sample

Described here are instructions for building and using an inexpensive automated microscope (AMi) that has been specifically designed for viewing and imaging the contents of multi-well plates. The X, Y, Z translation stage is controlled through dedicated software (AMiGUI) that is being made freely available. Movements are controlled by an Arduino-based board running grbl, and the graphical user interface and image acquisition are controlled via a Raspberry Pi microcomputer running Python. Images can be written to the Raspberry Pi or to a remote disk. Plates with multiple sample wells at each row/column position are supported, and a script file for automated z-stack depth-of-field enhancement is written along with the images. The graphical user interface and real-time imaging also make it easy to manually inspect and capture images of individual samples.

Identifying Risk at the Conceptual Phase of Product Design: A Software Solution

2007 ◽  
Author(s):  
Karthik Sundaram ◽  
Abhishek Chakravarty ◽  
Katie Grantham Lough ◽  
Derek Ditch
Keyword(s):  
User Interface ◽  
Risk Analysis ◽  
Software Architecture ◽  
Product Design ◽  
Design Process ◽  
Graphical User Interface ◽  
Analysis Tool ◽  
University Of Missouri ◽  
Early Design ◽  
Design Software

This paper introduces RED (Risk in Early Design) software developed by the R.I.S.K by Design Lab at University of Missouri-Rolla. The RED software is a risk analysis tool that enables failure prevention to begin during the conceptual phase of product design. The main focus of the paper is describing the software architecture and application. Its unique graphical user interface allows designers to simply select the functions of the system being designed and the software immediately generates a risk analysis report. This analysis categorizes risk likelihood and consequence elements for a product by translating the recorded information about function and failure. An example describing the software’s use in the design process is also presented.

Sign in / Sign up

Export Citation Format

Share Document