Analysis of (TiO 2 ) X (Ta 2 O 5 ) 1-X composite films prepared by radio frequency ion beam sputtering deposition

2006 ◽  
Author(s):  
Chien-Jen Tang ◽  
Yung-Chi Wu ◽  
Cheng-Chung Lee
Keyword(s):  
Radio Frequency ◽  
Ion Beam ◽  
Composite Films ◽  
Ion Beam Sputtering ◽  
Sputtering Deposition ◽  
Beam Sputtering

Study on the Surface Quality of Al2O3 Nano-Films by Ion Beam Sputtering Deposition

2011 ◽  
Vol 148-149 ◽  
pp. 54-57
Author(s):  
Xiao Ping Lin ◽  
Yun Dong ◽  
Lian Wei Yang
Keyword(s):  
Surface Quality ◽  
Ion Beam ◽  
Three Dimensional ◽  
Ion Beam Sputtering ◽  
Sputtering Deposition ◽  
Atomic Force ◽  
Beam Sputtering ◽  
Dimensional Growth ◽  
Different Thickness

The Al2O3 nano-films of different thicknesses (1~100nm) were successfully deposited on the monocrystalline Si surface by using ion beam sputtering deposition. The surface topography and the component of nano-films with different thickness were analyzed. The quality of the surface of nano-films was systematically studied. When the films’ thickness increase, the studies by atomic force microscope (AFM), X-ray photoelectron spectrum（XPS） show that the gathering grain continually grows up and transits from acerose cellula by two-dimensional growth to globularity by three-dimensional growth. The elements O, Al and Si were found on the surface of Al2O3 nano-films. With the thickness of the films increasing, the content of Al gradually increases and the intensity peak of Si wears off, the surface quality of the deposited films is ceaselessly improved

Formation of the crystalline β-C3N4 phase by dual ion beam sputtering deposition

2007 ◽  
Vol 61 (14-15) ◽  
pp. 2855-2858 ◽  
Author(s):  
J.P. Rivière ◽  
D. Texier ◽  
J. Delafond ◽  
M. Jaouen ◽  
E.L. Mathé ◽  
...  
Keyword(s):  
Ion Beam ◽  
Ion Beam Sputtering ◽  
Sputtering Deposition ◽  
Beam Sputtering ◽  
Dual Ion Beam Sputtering

scholarly journals Особенности фазообразования и электронного строения в пленочных композитах Al-=SUB=-1-x-=/SUB=-Si-=SUB=-x-=/SUB=- при магнетронном и ионно-лучевом напылении

2018 ◽  
Vol 60 (5) ◽  
pp. 1005
Author(s):  
В.А. Терехов ◽  
Д.С. Усольцева ◽  
О.В. Сербин ◽  
И.Е. Занин ◽  
Т.В. Куликова ◽  
...  
Keyword(s):  
Solid Solution ◽  
Silicon Nanocrystals ◽  
Ion Beam ◽  
Composite Films ◽  
Photon Radiation ◽  
Ion Beam Sputtering ◽  
Composite Target ◽  
X Ray ◽  
Beam Sputtering ◽  
Cubic System

AbstractThe peculiarities of the phase composition and electronic structure of aluminum–silicon composite films near the Al_0.75Si_0.25 composition obtained by the magnetron and ion-beam sputtering methods on a Si(100) silicon substrate are studied using the X-ray diffraction techniques and ultrasoft X-ray emission spectroscopy. In addition to silicon nanocrystals of about 25 nm in size, an ordered solid solution corresponding to the previously unknown Al_3Si phase is formed in magnetron sputtering on a polycrystalline Al matrix. Films obtained by ion-beam sputtering of the composite target are found to be monophasic and contained only one phase of an ordered solid solution of aluminum silicide Al_3Si of the Pm3m cubic system with the primitive cell parameter a = 4.085 Å. However, subsequent pulsed photon annealing of the composite with different radiation doses from 145 to 216 J/cm^2 gives rise to the partial decomposition of the Al_3Si phase with the formation of free metallic aluminum and silicon nanocrystals with sizes in the range from 50 to 100 nm, depending on the pulsed photon radiation dose.

Microstructure and Properties of TiAlN/AlN Composite Film Deposited on Cam’s Profile by Ion Beam Sputtering Technique

2010 ◽  
Vol 443 ◽  
pp. 465-468
Author(s):  
Pei Quan Guo ◽  
Shou Ren Wang ◽  
Huan Yong Cui
Keyword(s):  
Composite Film ◽  
Ion Beam ◽  
Temperature Phase ◽  
Ion Beam Sputtering ◽  
Shape Accuracy ◽  
Tem Analysis ◽  
Sputtering Deposition ◽  
Microstructure And Properties ◽  
Operation Temperature ◽  
Beam Sputtering

The study reports a new surface formation technology during manufacturing process of parallel indexing cam mechanism, ion beam sputtering deposition, in which the operation temperature can be controlled below the limitation of phases exchanging or at room temperature. Phase exchanging deformation can be avoided and the shape accuracy and dimension accuracy can be improved compared with surface quenching process. The microstructure and properties of TiAlN/AlN composite film deposited on the profile surface of cam (made of 45 steel) by ion beam sputtering deposition were discussed. X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscope (TEM) analysis has been used to characterize film’s microstructure and properties. The micro-hardness and adherence grade were tested.

Ultra-low stress high reflective film by dual-ion-beam sputtering deposition

2021 ◽  
Vol 61 (03) ◽  
Author(s):  
Jinlin Bai ◽  
Huasong Liu ◽  
Yugang Jiang ◽  
Lishuan Wang ◽  
Xiao Yang ◽  
...  
Keyword(s):  
Ion Beam ◽  
Ion Beam Sputtering ◽  
Sputtering Deposition ◽  
Beam Sputtering ◽  
Dual Ion Beam Sputtering
Sign in / Sign up

Export Citation Format

Share Document