Surface quality of large KDP crystal fabricated by single-point diamond turning

2006 ◽  
Author(s):  
Jing Hou ◽  
Jianfeng Zhang ◽  
Jinlin Chen ◽  
Xiaoli Zhang ◽  
Dezhi Hu
Keyword(s):  
Surface Quality ◽  
Single Point ◽  
Diamond Turning ◽  
Kdp Crystal

A Study of Cutting Strategy in Single-Point Diamond Turning of Micro V-Groove Patterns on Precision Roller Drums

2014 ◽  
Vol 625 ◽  
pp. 742-747
Author(s):  
C.H. Mak ◽  
C.F. Cheung ◽  
M.J. Ren ◽  
L.B. Kong ◽  
S. To
Keyword(s):  
Surface Quality ◽  
Single Point ◽  
Cutting Parameters ◽  
Diamond Turning ◽  
Surface Generation ◽  
Depth Of Cut ◽  
Tool Paths ◽  
Cutting Strategy ◽  
Groove Pattern

This paper presents a study of cutting strategies on the surface generation in single-point diamond turning of micro V-groove patterns on precision roller drums. An aluminium precision roller drum with a diameter 250mm and 100 long was diamond turned with a V-groove pattern. A series of cutting experiments were designed to study the effect of the variation of various cutting parameters and cutting tool paths on the surface quality in diamond turning of the precision roller drum. The parameters under investigation included the depth of cut, number of steps and the depth for each cut when diamond turning V-grooves on the cylindrical surface of a workpiece. The measurement result indicates that the surface quality of V-grooves machined on the precision roller drums is affected by cutting strategies. The optimal cutting strategy for machining a V-groove pattern on a precision drum with 5µm depth was obtained.

Improving the Surface Roughness of a CVD Coated Silicon Carbide Disk by Performing Ductile Regime Single Point Diamond Turning

2008 ◽  
Author(s):  
Deepak Ravindra ◽  
John Patten
Keyword(s):  
Surface Roughness ◽  
Silicon Carbide ◽  
Surface Quality ◽  
Removal Rate ◽  
Single Point ◽  
Extreme Environments ◽  
High Hardness ◽  
Diamond Turning ◽  
Ductile Regime Machining

Silicon carbide (SiC) is one of the advanced engineered ceramics materials designed to operate in extreme environments. One of the main reasons for the choice of this material is due to its excellent electrical, mechanical and optical properties that benefit the semiconductor, MEMS and optoelectronic industry respectively. Manufacture of this material is extremely challenging due to its high hardness, brittle characteristics and poor machinability. Severe fracture can result when trying to machine SiC due to its low fracture toughness. However, from past experience it has been proven that ductile regime machining of silicon carbide is possible. The main goal of the subject research is to improve the surface quality of a chemically vapor deposited (CVD) polycrystalline SiC material to be used in an optics device such as a mirror. Besides improving the surface roughness of the material, the research also emphasized increasing the material removal rate (MRR) and minimizing the diamond tool wear. The surface quality was improved using a Single Point Diamond Turning (SPDT) machining operation from 1158nm to 88nm (Ra) and from 8.49μm to 0.53μm (Rz; peak-to-valley).

Simulation of Large Scale KDP Crystal Polishing by Computer Controlled Micro-Nano Deliquescence

2012 ◽  
Vol 497 ◽  
pp. 165-169 ◽  
Author(s):  
He Ping Zhang ◽  
Dong Ming Guo ◽  
Xu Wang ◽  
Hang Gao
Keyword(s):  
Large Scale ◽  
Surface Condition ◽  
Single Point ◽  
Damage Threshold ◽  
Diamond Turning ◽  
Water Soluble ◽  
Optical Elements ◽  
Kdp Crystal ◽  
Computer Controlled ◽  
Laser Induced Damage

Although Single Point Diamond Turning (SPDT) can do pretty well in optical surfacing of large scale KDP crystal, both the surface accuracy and integrity are considerably high; meanwhile as the defects of micro-waveness and stress are inevitable, the laser-induced damage threshold of KDP optical elements after SPDT still cannot be satisfied. Because of the characters of deliquescent and water-soluble, the process of computer controlled Micro-nano deliquescence is attempted to remove the residual micro-waveness on KDP surface after SPDT. Based on the assumption of Preston and the characters of Micro-nano deliquescence, the model of material removal ratio is suggested, the dwell time for ascertained KDP surface is solved, the processing of computer controlled Micro-nano deliquescence is simulated and the processed surface condition on theory is obtained. Besides, the influences of different parameters on the surfacing efficiency and accuracy are analyzed. Finally, three polishing tracks are comparatively analyzed. The simulation results are quite important in guiding the experimental polishing of large scale KDP by computer controlled Micro-nano deliquescence

scholarly journals ANALYSIS OF THE SURFACE QUALITY OF PARTS PROCESSED BY SINGLE POINT INCREMENTAL FORMING

2016 ◽  
Vol 19 (3) ◽  
Author(s):  
CRINA RADU ◽  
EUGEN HERGHELEGIU ◽  
ION CRISTEA ◽  
CAROL SCHNAKOVSZKY
Keyword(s):  
Surface Quality ◽  
Process Parameters ◽  
Incremental Forming ◽  
Single Point ◽  
Single Point Incremental Forming ◽  
Metal Sheets ◽  
Vertical Step ◽  
Tool Diameter ◽  
Aluminium Metal

<p>The aim of the current work was to analyse the influence of the process parameters (tool diameter, size of the vertical step of tool, feed rate and spindle speed) on the quality of the processed surface, expressed in terms of roughness and macrostructure in the case of parts processed by single point incremental forming. The analysis was made on A1050 aluminium metal sheets. The obtained results revealed that the process parameters influence differently the surface quality, the worst influence being exerted by the increase of the vertical step of tool. </p>

scholarly journals Research on the Influencing Factors of "Scale Veins" of Single Point Incremental Forming Workpieces Surface

2015 ◽  
Vol 9 (1) ◽  
pp. 1025-1032
Author(s):  
Shi Pengtao ◽  
Li Yan ◽  
Yang Mingshun ◽  
Yao Zimeng
Keyword(s):  
Surface Quality ◽  
Incremental Forming ◽  
Single Point ◽  
Spindle Speed ◽  
Experimental Results ◽  
Feed Speed ◽  
Single Point Incremental Forming ◽  
Machining Parameters ◽  
The Mathematical Model

To furthermore optimize the machining parameters and improve the surface quality of the workpieces manufactured by single point incremental forming method, the formation mechanism of the sacle veins on the metal incremental froming workpieces was studied through experiment method. The influence principle of the spindle speed, the feed speed and the material of tip of tools on the length of scale veins was obtained through analyzing the experimental results and building the mathematical model among the length of scale veins were feed speed and spindle speed through measuring the roughness of surfaces and observing the appearance of the forming workpieces. The experimental results showed that, the spindle speed, the feed speed and the material of tool tips have a significant effect on the scale veins formation on the surface of forming workpieces. Therefore, an appropriate group of spindle speed and feed speed can reduce the effect of scale veins on the roughness of single point incremental forming workpieces and furthermore improve the surface quality of forming workpieces.

Optical Effects of Surface Finish by Ultraprecision Single Point Diamond Machining

2010 ◽  
Vol 132 (2) ◽  
Author(s):  
Lei Li ◽  
Stuart A. Collins ◽  
Allen Y. Yi
Keyword(s):  
Surface Quality ◽  
Single Point ◽  
Diamond Turning ◽  
Optical Diffraction ◽  
Machining Process ◽  
Machined Surface ◽  
Tool Marks ◽  
Tool Mark ◽  
Machined Surface Quality ◽  
Machined Surfaces

The single point diamond turning process has been used extensively for direct optical surface fabrication. However, the diamond machined surfaces have characteristic periodic tool marks, which contribute to reduced optical performance such as scattering and distortion. In this paper, studies of the characteristics of diamond machined surface and scattering from the diamond machined surfaces are presented. Four different parameters, the first order optical diffraction, the zero order reflection, the surface roughness, and the residual tool mark depth, are used as indicators for the machined surface quality. Four sets of tests are presented showing the relationship between machined surface quality and machining conditions such as spindle speed, feedrate, and machining process. Finally, an empirical model is given based on the measurements.

scholarly journals Improving of Surface Quality of Metal Reflector Mirrors Machined by Single Point Diamond Turning

2021 ◽  
Vol 12 (2) ◽  
pp. 139-145
Author(s):  
G. A. Gusakov ◽  
G. V. Sharonov
Keyword(s):  
Heat Treatment ◽  
Aluminum Alloy ◽  
Aluminum Alloys ◽  
Surface Treatment ◽  
Radiation Resistance ◽  
Single Point ◽  
Diamond Turning ◽  
Laser Damage Threshold ◽  
Complete Disappearance

Improving the technology of diamond turning of aluminum alloys is of great importance for expanding the application areas of metal-optical products based on aluminum in aerospace technology. The aim of this work was to study the effect of surface inhomogeneities of the initial aluminum alloy substrates on their optical and mechanical characteristics and to determine ways of improving the quality of aluminum reflector mirrors manufactured using nanoscale single point diamond turning. The investigated reflector mirrors were made from AMg2 aluminum alloy. The optical surface treatment was carried out on a precision turning lathe with an air bearing spindle using a special diamond cutter with a blade radius of ≤ 0.05 μm. The analysis of the surface structure of the AMg2 alloy substrates was carried out by scanning electron microscopy / electron microprobe. The quality control of the surface treatment of the manufactured reflector mirrors was carried out by atomic force microscopy. The reflectivity and radiation resistance of these samples were also investigated.It is shown that an important problem in the manufacture of optical elements from aluminum alloys is the inhomogeneity of the structure of the initial material, associated with the presence of intermetallic inclusions. Heat treatment of the AMg2 alloy substrates at T ≥ 380 °C makes it possible to improve the quality of surface and the radiation resistance of aluminum mirrors both by removing mechanical stresses and by partially homogenizing the starting material. The optimum is heat treatment at the maximum allowable temperature for the AMg2 alloy T = 540 ºС, as a result of which there is a complete disappearance of intermetallic inclusions with an increased magnesium content. The use of high-temperature heat treatment of AMg2 alloy substrates allows, in comparison with unannealed samples, to reduce the surface roughness from 1.5 to 0.55 nm, to increase the reflectivity of mirrors at a wavelength of 1064 nm from 0.89 to 0.92, and to increase the laser damage threshold from 3.5 to 5 J / cm2.

Single Point Diamond Turning Effects on Surface Quality and Subsurface Damage in Ceramics

2009 ◽  
Author(s):  
Deepak Ravindra ◽  
John A. Patten ◽  
Jun Qu
Keyword(s):  
Raman Spectroscopy ◽  
Optical Microscopy ◽  
Surface Quality ◽  
Material Removal ◽  
Single Point ◽  
Subsurface Damage ◽  
Diamond Turning ◽  
Acoustic Microscopy ◽  
Scanning Acoustic Microscopy ◽  
Machining Parameters

Advanced ceramics, such as Silicon Carbide (SiC) and Quartz, are increasingly being used for industrial applications. These ceramics are hard, strong, inert, and light weight. This combination of properties makes them ideal candidates for tribological, semiconductor, MEMS and optoelectronic applications respectively. Manufacturing these materials without causing surface and subsurface damage is extremely challenging due to their high hardness, brittle characteristics and poor machinability. Often times, severe fracture can result when trying to achieve high material removal rates during machining of SiC or quartz due to their low fracture toughness. This research demonstrates that ductile regime Single Point Diamond Turning (SPDT) is possible on these materials to improve its surface quality without imparting subsurface damage. Machining parameters, such as depth of cut and feed, used to carry out ductile regime machining will be discussed. Subsurface damage analysis was carried out on the machined samples using non-destructive methods such as Optical Microscopy, Raman Spectroscopy and Scanning Acoustic Microscopy to show evidence that the chosen material removal method leaves a damage-free surface and subsurface. Optical microscopy was used to image the improvements in surface finish whereas Raman spectroscopy and scanning acoustic microscopy was used to observe the formation of amorphous layer and subsurface imaging in the machined regions. All three techniques complement the initial hypothesis of being able to remove a nominally brittle material in the ductile regime.

Ultra-Precision Turning Technology of Gold Cone in Fast Ignition

2013 ◽  
Vol 562-565 ◽  
pp. 147-151
Author(s):  
Guo Li ◽  
Yan Hua Huang ◽  
Wei Chao Tong ◽  
Guang Hui Yuan ◽  
Yang Tao ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Wall Thickness ◽  
Single Point ◽  
Fast Ignition ◽  
Diamond Turning ◽  
End Effect ◽  
Processing Parameter ◽  
Ultra Precision ◽  
Cone Surface

Fast Ignition (FI) attracts much attention owing to its advantages. The fabrication of fast ignition targets is one of the key technologies in FI study. Based on the single point diamond turning (SPDT) technology, Diamond post-turning method is adopted in this paper for the fabrication of gold cone. It not only helps to reduce the end-effect of cone mandrel and consequently improve the coaxiality of internal and external cone surface, but also helps to improve the quality of cone surface and the wall thickness consistency. Besides, the processing parameter of diamond post-turning is experimentally studied in this paper for its effect on the cone surface roughness. According to results, the cone surface roughness is Ra 9.21nm, the wall thickness consistency is 3μm and the cone end surface roughness is Ra5.72nm。

Sign in / Sign up

Export Citation Format

Share Document