Optical fiber coatings for medical applications

1992 ◽  
Author(s):  
Dipak R. Biswas
Keyword(s):  
Optical Fiber ◽  
Medical Applications ◽  
Fiber Coatings

Heat Transfer in Chemical Vapor Deposited Optical Fiber Coatings

2001 ◽  
Author(s):  
Patricia O. Iwanik ◽  
Wilson K. S. Chiu
Keyword(s):  
Heat Transfer ◽  
Optical Fiber ◽  
Gas Flow ◽  
Convection Heat Transfer ◽  
Fiber Surface ◽  
Chemical Vapor ◽  
Temperature Changes ◽  
Flow And Heat Transfer ◽  
Chemical Vapor Deposited ◽  
Fiber Coatings

Abstract A fundamental understanding of how reactor parameters influence the fiber surface temperature is essential to manufacturing high quality optical fiber coatings by chemical vapor deposition (CVD). In an attempt to better understand this process, a finite volume model has been developed to study the gas flow and heat transfer of an optical fiber as it travels through a CVD reactor. This study showed that draw speed significantly affects fiber temperature inside the reactor, with temperature changes up to 45% observed under the conditions studied. Multiple heat transfer modes contribute to this phenomena, with convection heat transfer dominating the process.

Detection of microscopic defects in optical fiber coatings using angle-resolved skew rays

2016 ◽  
Vol 41 (17) ◽  
pp. 4036 ◽  
Author(s):  
George Y. Chen ◽  
Tanya M. Monro ◽  
David G. Lancaster
Keyword(s):  
Optical Fiber ◽  
Fiber Coatings

Specialty High Performance Coatings for Optical Fiber Applications via Perfluorocyclobutyl (PFCB) Aryl Ether Polymers

2007 ◽  
Vol 1030 ◽  
Author(s):  
Stephen M. Budy ◽  
Scott T. Iacono ◽  
Wade Hawkins ◽  
Paul Foy ◽  
John Ballato ◽  
...  
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
High Performance ◽  
Polymer Coatings ◽  
Aryl Ether ◽  
Molecular Weights ◽  
Higher Temperature ◽  
Optical Applications ◽  
Optical Fiber Applications ◽  
Fiber Coatings

AbstractThere is a growing need for optical fiber coatings that can sustain higher temperatures than present materials permit. To date, polyimides are used predominantly but they generally are difficult to process and usually require multiple depositions to achieve the desired film thickness. Perfluorocyclobutyl (PFCB) aryl ether polymers have demonstrated much success as processable and amorphous fluoropolymers,[1] with particular emphasis on high performance optical applications.[2] This work discusses recent efforts into perfluorocyclobutyl aryl ether polymer-based optical fiber coatings.[3] A series of silica-based optical fibers were drawn with differing PFCB polymer coatings compositions and molecular weights on a Heathway draw tower. Results include a more than doubled usage temperature of coating (decomposition temperatures (Td) in nitrogen and air were above 450 °C) without affecting fiber mechanical properties and comparable isothermal stability to conventional coatings, except with a >150 °C higher temperature. Preliminary results of the first successful coating of optical fibers by PFCB polymers will be presented herein, as well as future endeavors.

An Investigation of Optical Fiber Coating Performance in Embedded Sensing Applications

1989 ◽  
Vol 172 ◽  
Author(s):  
Rebecca A. Haaksma ◽  
Marilyn J. Cehelnik ◽  
M. Jonell Kerkhoff
Keyword(s):  
Composite Materials ◽  
Optical Fiber ◽  
Optical Fiber Sensor ◽  
Performance Criteria ◽  
Fiber Sensor ◽  
Sensor Systems ◽  
Coating Performance ◽  
Embedded Sensing ◽  
Sensing Applications ◽  
Fiber Coatings

AbstractThe use of composite materials for aerospace applications has created an increased need for developing nondestructive methods for assessment of composite performance. Embedded optical fiber sensor technology provides the potential for monitoring parameters of interest during processing and testing of composite materials as well as the opportunity for tracking properties over the lifetime of composite parts in service. The successful development of this technology depends on designing optical fiber sensor systems suitable for embedding in composite structures.This paper focuses on the role played by optical fiber coatings in the design of embedded sensor systems. The performance of different optical fiber coatings under typical composite processing conditions will be discussed. Photomicrographs of test specimens containing embedded sensors will be presented which show delamination occurring at the coating/optical fiber interface in preference to the coating/epoxy resin interface. Coating performance criteria will be outlined for use in the selection of fiber optic sensors for composite applications.

UV-curable formulations for UV-transparent optical fiber coatings

2004 ◽  
Vol 49 (1) ◽  
pp. 1-12 ◽  
Author(s):  
F Masson ◽  
C Decker ◽  
S Andre ◽  
X Andrieu
Keyword(s):  
Optical Fiber ◽  
Uv Curable ◽  
Fiber Coatings
Sign in / Sign up

Export Citation Format

Share Document