Base isolation system using shape memory alloy wires

2004 ◽  
Author(s):  
Yoshitaka Yamashita ◽  
Arata Masuda ◽  
Akira Sone
Keyword(s):  
Shape Memory Alloy ◽  
Shape Memory ◽  
Base Isolation ◽  
Isolation System ◽  
Base Isolation System

Design of Shape Memory Alloy Damper for Base Isolated Structure

1997 ◽  
Author(s):  
Krzysztof Wilde ◽  
Paolo Gardoni ◽  
Yozo Fujino ◽  
Stefano Besseghini
Keyword(s):  
Shape Memory Alloy ◽  
Shape Memory ◽  
Base Isolation ◽  
Hysteretic Behavior ◽  
Isolation System ◽  
Rubber Bearing ◽  
Laminated Rubber Bearing ◽  
Base Isolation System ◽  
Rubber Bearings ◽  
Smart Base Isolation

Abstract Base isolation provides a very effective passive method of protecting the structure from the hazards of earthquakes. The proposed isolation system combines the laminated rubber bearing with the device made of shape memory alloy (SMA). The smart base isolation uses hysteretic behavior of SMA to increase the structural damping of the structure and utilizes the different responses of the SMA at different levels of strain to control the displacements of the base isolation system at various excitation levels. The performance of the smart base isolation is compared with the performance of isolation by laminated rubber bearings to assess the benefits of additional SMA damper for isolation of three story building.

Seismic Evaluation of Base Isolated System Equipped with Shape Memory Alloys

2013 ◽  
Vol 831 ◽  
pp. 110-114
Author(s):  
S. Alvandi ◽  
M. Ghassemieh
Keyword(s):  
Shape Memory Alloys ◽  
Shape Memory ◽  
Seismic Isolation ◽  
Passive Control ◽  
Structural Model ◽  
Base Isolation ◽  
Base Shear ◽  
Seismic Evaluation ◽  
Isolation System ◽  
Base Isolation System

Seismic isolation system is an example of passive control system that effectively improves the performance of structures. This research discusses the seismic performance of a elastomeric base isolation system which provide the combined features of vertical load support, horizontal flexibility and energy absorbing capacity, utilizing shape memory alloys that provides re-centering force and additional damping in the system. Also this paper compares the effect of such alloys with memory effect and/or superelasticity (with pre-straining) in base isolated structure. To provide such comparison, a nonlinear structural model has been developed on some benchmark control problems and some health monitoring evaluation criterias are used. The smart base isolation utilizes the different responses of shape memory alloys at several levels of strain to control the displacements of the rubber bearing and base shear at excitation level. Furthermore the proposed based isolation systems has enhanced performance in terms of response reduction and re-centering capacity.

scholarly journals Seismic Behavior of Superelastic Shape Memory Alloy Spring in Base Isolation System of Multi-Story Steel Frame

Materials ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 997 ◽  
Author(s):  
Yuping Liu ◽  
Hongyang Wang ◽  
Canxing Qiu ◽  
Xingnan Zhao
Keyword(s):  
Finite Element ◽  
Shape Memory ◽  
Earthquake Engineering ◽  
Seismic Behavior ◽  
Base Isolation ◽  
Residual Deformation ◽  
Steel Frame ◽  
Isolation System ◽  
Base Isolation System ◽  
Sma Spring

Owing to excellent re-centering capability and good damping behavior, superelastic shape memory alloys (SMAs) are emerging as a potential new material to enhance the seismic resilience of civil structures. This paper focuses on using base isolation with SMA device for isolated structures. SMA springs are deemed to be promising candidate as the damper in the base isolation system, due to the compact form, damping contribution, restoring capability and flexible stiffness. This paper reported the concept of an innovative spring which is made of superelastic SMA wire. Then cyclic loading tests were carried out to evaluate the interested cyclic properties. Parametric analyses based on finite element simulations were conducted to reveal the versatile performance of SMA springs. To further examine its seismic behavior in the base isolation system, the SMA spring was later installed at the isolation level of a multi-story steel frame, based on the finite element model built in the earthquake engineering simulation platform OpenSees. An ordinary elastic spring is included for comparison to highlight the features of SMA springs. Both isolated frames were subjected to real earthquakes. The comparisons indicated that using SMA spring is more effective in controlling maximum and residual deformation for the protected superstructures. Thus, this paper well demonstrated the feasibility and merits of using SMA springs in the isolated frames.

scholarly journals Influence of Elastomeric Bearings in Tension on the Seismic Performance of Base-Isolated r.c. Buildings

2020 ◽  
Vol 11 (1) ◽  
pp. 82
Author(s):  
Fabio Mazza ◽  
Mirko Mazza
Keyword(s):  
Base Isolation ◽  
Nonlinear Models ◽  
Vertical Component ◽  
Computer Code ◽  
Nonlinear Phenomena ◽  
Isolation System ◽  
Elastomeric Bearings ◽  
Near Fault ◽  
Base Isolation System ◽  
Near Fault Earthquakes

Elastomeric bearings are commonly used in base-isolation systems to protect the structures from earthquake damages. Their design is usually developed by using nonlinear models where only the effects of shear and compressive loads are considered, but uncertainties still remain about consequences of the tensile loads produced by severe earthquakes like the near-fault ones. The present work aims to highlight the relapses of tension on the response of bearings and superstructure. To this end, three-, seven- and ten-storey r.c. framed buildings are designed in line with the current Italian seismic code, with a base-isolation system constituted of High-Damping-Rubber Bearings (HDRBs) designed for three values of the ratio between the vertical and horizontal stiffnesses. Experimental and analytical results available in literature are used to propose a unified nonlinear model of the HDRBs, including cavitation and post-cavitation of the elastomer. Nonlinear incremental dynamic analyses of the test structures are carried out using a homemade computer code, where other models of HDRBs considering only some nonlinear phenomena are implemented. Near-fault earthquakes with comparable horizontal and vertical components, prevailing horizontal component and prevailing vertical component are considered as seismic input. Numerical results highlight that a precautionary estimation of response parameters of the HDRBs is attained referring to the proposed model, while its effects on the nonlinear response of the superstructure are less conservative.

Hysteresis Loops of Base Isolation System - An Overview

2021 ◽  
Vol 879 ◽  
pp. 189-201
Author(s):  
M.A. Amir ◽  
N.H. Hamid
Keyword(s):  
Earthquake Engineering ◽  
Structural Damage ◽  
Base Isolation ◽  
Numerical Models ◽  
Hysteresis Loops ◽  
Human Beings ◽  
Rc Buildings ◽  
Isolation System ◽  
Base Isolation System ◽  
Isolation Systems

Recently, there are a lot of technological developments in the earthquake engineering field to reduce structural damage and one of them is a base isolation system. The base isolation system is one of the best technologies for the safety of human beings and properties under earthquake excitations. The aim of this paper is to review previous research works on simulation of base isolation systems for RC buildings and their efficiency in the safety of these buildings. Base isolation decouples superstructure from substructure to avoid transmission of seismic energy to the superstructure of RC buildings. The most effective way to assess the base isolation system for RC building under different earthquake excitations is by conducting experiment work that consumes more time and money. Many researchers had studied the behavior of base isolation system for structure through modeling the behavior of the base isolation in which base isolator is modeled through numerical models and validated through experimental works. Previous researches on the modeling of base isolation systems of structures had shown similar outcomes as the experimental work. These studies indicate that base isolation is an effective technology in immunization of structures against earthquakes.

Sign in / Sign up

Export Citation Format

Share Document