Progress toward developing high-performance 193-nm single-layer positive resist based on functionalized poly(norbornenes)

2000 ◽  
Author(s):  
Pushkara R. Varanasi ◽  
George M. Jordhamo ◽  
Margaret C. Lawson ◽  
K. Rex Chen ◽  
William R. Brunsvold ◽  
...  
Keyword(s):  
High Performance ◽  
Single Layer ◽  
193 Nm ◽  
Positive Resist

Design and development of high-performance 193-nm positive resist based on functionalized poly(cyclicolefins)

1999 ◽  
Author(s):  
Pushkara R. Varanasi ◽  
J. Maniscalco ◽  
Ann M. Mewherter ◽  
Margaret C. Lawson ◽  
George M. Jordhamo ◽  
...  
Keyword(s):  
High Performance ◽  
Design And Development ◽  
193 Nm ◽  
Positive Resist

scholarly journals 2D MoS2 Encapsulated Silicon Nanopillar Array with High-Performance Light Trapping Obtained by Direct CVD Process

Crystals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 267
Author(s):  
Minyu Bai ◽  
Zhuoman Wang ◽  
Jijie Zhao ◽  
Shuai Wen ◽  
Peiru Zhang ◽  
...  
Keyword(s):  
Silicon Substrate ◽  
High Performance ◽  
Low Cost ◽  
Light Trapping ◽  
Incident Light ◽  
Single Layer ◽  
Chemical Vapor ◽  
Optoelectronic Device ◽  
Planar Silicon ◽  
Shortwave Infrared

Weak absorption remains a vital factor that limits the application of two-dimensional (2D) materials due to the atomic thickness of those materials. In this work, a direct chemical vapor deposition (CVD) process was applied to achieve 2D MoS2 encapsulation onto the silicon nanopillar array substrate (NPAS). Single-layer 2D MoS2 monocrystal sheets were obtained, and the percentage of the encapsulated surface of NPAS was up to 80%. The reflection and transmittance of incident light of our 2D MoS2-encapsulated silicon substrate within visible to shortwave infrared were significantly reduced compared with the counterpart planar silicon substrate, leading to effective light trapping in NPAS. The proposed method provides a method of conformal deposition upon NPAS that combines the advantages of both 2D MoS2 and its substrate. Furthermore, the method is feasible and low-cost, providing a promising process for high-performance optoelectronic device development.

Well-Aligned Graphene Oxide Nanosheets Decorated with Zinc Oxide Nanocrystals for High Performance Photocatalytic Application

2015 ◽  
Vol 14 (03) ◽  
pp. 1550007 ◽  
Author(s):  
K. Kaviyarasu ◽  
C. Maria Magdalane ◽  
E. Manikandan ◽  
M. Jayachandran ◽  
R. Ladchumananandasivam ◽  
...  
Keyword(s):  
Zinc Oxide ◽  
Graphene Oxide ◽  
High Performance ◽  
Chemical Reduction ◽  
Visible Region ◽  
Single Layer ◽  
Single Layer Graphene ◽  
Graphene Oxides ◽  
X Ray ◽  
Nanoscale Structures

Graphene oxide (GO) nanosheets modified with zinc oxide nanocrystals were achieved by a green wet-chemical approach. As-obtained products were characterized by XRD, Raman spectra, XPS, HR-TEM, EDS, PL and Photocatalytic studies. XRD studies indicate that the GO nanosheet have the same crystal structure found in hexagonal form of ZnO . The enhanced Raman spectrum of 2D bands confirmed formation of single layer graphene oxides. The gradual photocatalytic reduction of the GO nanosheet in the GO : ZnO suspension of ethanol was studied by using X-ray photoelectron (XPS) spectroscopy. The nanoscale structures were observed and confirmed using high resolution transmission electron microscopy (HR-TEM). The evolution of the elemental composition, especially the various numbers of layers were determined from energy dispersive X-ray spectra (EDS). PL properties of GO : ZnO nanosheet were found to be dependent on the growth condition and the resultant morphology revealed that GO nanosheet were highly transparent in the visible region. The photocatalytic performance of GO : ZnO nanocomposites was performed under UV irradiation. Therefore, the ZnO nanocrystals in the GO : ZnO composite could be applied in gradual chemical reduction and consequently tuning the electrical conductivity of the graphene oxide nanosheet.

Development of single-layer positive resist process for electron beam direct writing technology

1995 ◽  
Vol 78 (8) ◽  
pp. 81-91 ◽  
Author(s):  
Hidenori Yamaguchi ◽  
Toshio Sakamizu ◽  
Fumio Murai ◽  
Hiroshi Shiraishi ◽  
Hajime Hayakawa ◽  
...  
Keyword(s):  
Electron Beam ◽  
Single Layer ◽  
Direct Writing ◽  
Writing Technology ◽  
Positive Resist

scholarly journals Design, fabrication and experimental studies of compliant flexure diaphragm for micro pump

2018 ◽  
Vol 7 (2.21) ◽  
pp. 66 ◽  
Author(s):  
R Roopa ◽  
P Navin Karanth ◽  
S M. Kulkarni
Keyword(s):  
Polyvinylidene Fluoride ◽  
High Performance ◽  
Experimental Studies ◽  
Single Layer ◽  
Operating Voltage ◽  
Driving Voltage ◽  
Element Analysis ◽  
Central Deflection ◽  
Large Numbers ◽  
Micro Pump

This study reports the performance of piezo actuated compliant flexure diaphragm for micropump and MEMS application. To achieve the high performance of diaphragm at the low operating voltage compliant flexure diaphragm design is introduced. Very limited work has done on the diaphragms of micropump. Large numbers of mechanical micropumps have used plane diaphragms. The central deflection of diaphragm plays an important role in defining the micropump performance. The flow rate of mechanical type micropump strongly depends on the central deflection of diaphragm. In this paper compliant flexure diaphragms are designed for micropump to achieve higher deflection at lower operating voltage. Finite element analysis of compliant flexure diaphragm with single layer PVDF (Polyvinylidene fluoride) actuator is simulated in COMSOL. Compliant flexure diaphragms with a different number of flexures are analyzed. The central deflection of compliant flexure diaphragms is measured for driving voltages of 90V to 140V in 10 steps. The deflection of the compliant flexure diaphragm mainly depends on flexure width and length, the number of flexures in the diaphragm, PVDF thickness, diaphragm thickness and driving voltage. Use of compliant flexure diaphragm for micropump will reduce the mass and driving voltage of micropump. An attempt is made to compare the results of compliant flexure diaphragms with plane diaphragms. From the experimental results it is noticed that the compliant flexure diaphragm deflection is twice that of the plane diaphragm at same driving voltage. Deflection of three flexure and four flexure compliant diaphragms is 10.5µm and 11.5µm respectively at 140V.  

Highly efficient single-layer blue polymer light-emitting diodes based on hole-transporting group substituted poly(fluorene-co-dibenzothiophene-S,S-dioxide)

2017 ◽  
Vol 5 (37) ◽  
pp. 9680-9686 ◽  
Author(s):  
Feng Peng ◽  
Na Li ◽  
Lei Ying ◽  
Wenkai Zhong ◽  
Ting Guo ◽  
...  
Keyword(s):  
Blue Light ◽  
High Performance ◽  
Light Emitting Diodes ◽  
Single Layer ◽  
Random Copolymer ◽  
Hole Transport ◽  
Light Emitting ◽  
Hole Transporting ◽  
Polymer Light Emitting Diodes ◽  
Copolymer Poly

We developed a series of high-performance blue light-emitting polymers that contain hole-transport moieties comprising carbazole or triphenylamine substituents in the side chains of random copolymer poly(fluorene-co-dibenzothiophene-S,S-dioxide) (PFSO).

Sign in / Sign up

Export Citation Format

Share Document