Three-dimensional reconstruction by focus sensing from conventional two-dimensional image slices

1998 ◽  
Author(s):  
Kie B. Nahm ◽  
Eun S. Shin ◽  
Seok-moon Ryoo
Keyword(s):  
Three Dimensional ◽  
Two Dimensional ◽  
Three Dimensional Reconstruction ◽  
Dimensional Image ◽  
Two Dimensional Image ◽  
Dimensional Reconstruction

OVERLAPPING FORE AND OSEM FOR 3D PET IMAGE RECONSTRUCTION

2004 ◽  
Vol 16 (05) ◽  
pp. 238-243
Author(s):  
WEI-MIN JENG ◽  
MING-CHUNG CHIANG
Keyword(s):  
Image Reconstruction ◽  
Three Dimensional ◽  
Two Dimensional ◽  
Dimensional Image ◽  
Two Dimensional Image ◽  
Positron Emission ◽  
Dimensional Reconstruction ◽  
Abnormal Metabolism ◽  
Pet Image Reconstruction ◽  
Pet Scanners

Positron emission tomography (PET) images can be used to judge whether or not a person's bodily tissue is showing abnormal metabolism, providing a tool for early diagnosis and treatment of illnesses. Contemporary PET scanners have retracted their septa in order to increase the collected coincidental events. Thus, the protocol either needs to undergo three-dimensional image reconstruction, or use rebinning formulas to perform the less expensive two-dimensional image reconstruction for final images. Reconstruction using the second method saves image reconstruction time. The main goal of the paper is to further improve the performance by overlapping the rebinning and two-dimensional reconstruction operations, so as to early start in reconstruction, and to be able to undergo image reconstruction based on the pipelined direct sinograms. Frequency distance relations are analyzed in detail to generate the Fourier transformed sinograms in order for subsequent pipelined stages of reconstruction. The two-dimensional reconstruction operation does not have to wait until the completion of all sinogram generations, therefore it can hide most of the time spent in rebinning operations. The associated parameters can be pre-calculated indiscriminately beforehand for best performance.

Influence of Electron Noise on Three-dimensional Image Reconstruction

1976 ◽  
Vol 31 (12) ◽  
pp. 1717-1721 ◽  
Author(s):  
R. Hegerl ◽  
W. Hoppe
Keyword(s):  
Image Reconstruction ◽  
Three Dimensional ◽  
Two Dimensional ◽  
Three Dimensional Reconstruction ◽  
Dimensional Image ◽  
Integral Dose ◽  
Dimensional Reconstruction ◽  
Level Of Significance

AbstractA three-dimensional reconstruction requires the same integral dose as a conventional two-dimensional micrograph provided that the level of significance and the resolution are identical. The necessary dose D for one of the K projections in a reconstruction series is, therefore, the integral dose divided by K.

Three-Dimensional Reconstruction of Two Forms of the Chaperonin GRO EL

1990 ◽  
Vol 48 (1) ◽  
pp. 258-259
Author(s):  
J.L. Carrascosa ◽  
G. Abella ◽  
S. Marco ◽  
M. Muyal ◽  
J.M. Carazo
Keyword(s):  
Three Dimensional ◽  
The Other ◽  
Two Dimensional ◽  
Series Method ◽  
Three Dimensional Reconstruction ◽  
Structural Components ◽  
E Coli ◽  
Dimensional Reconstruction ◽  
Morphogenetic Factors ◽  
Tilt Series

Chaperonins are a class of proteins characterized by their role as morphogenetic factors. They trantsiently interact with the structural components of certain biological aggregates (viruses, enzymes etc), promoting their correct folding, assembly and, eventually transport. The groEL factor from E. coli is a conspicuous member of the chaperonins, as it promotes the assembly and morphogenesis of bacterial oligomers and/viral structures.We have studied groEL-like factors from two different bacteria:E. coli and B.subtilis. These factors share common morphological features , showing two different views: one is 6-fold, while the other shows 7 morphological units. There is also a correlation between the presence of a dominant 6-fold view and the fact of both bacteria been grown at low temperature (32°C), while the 7-fold is the main view at higher temperatures (42°C). As the two-dimensional projections of groEL were difficult to interprete, we studied their three-dimensional reconstruction by the random conical tilt series method from negatively stained particles.

scholarly journals A Self-Established “Machining-Measurement-Evaluation” Integrated Platform for Taper Cutting Experiments and Applications

Micromachines ◽  
2021 ◽  
Vol 12 (8) ◽  
pp. 929
Author(s):  
Xudong Yang ◽  
Zexiao Li ◽  
Linlin Zhu ◽  
Yuchu Dong ◽  
Lei Liu ◽  
...  
Keyword(s):  
Three Dimensional ◽  
Precision Machining ◽  
Two Dimensional ◽  
Dimensional Image ◽  
Two Dimensional Image ◽  
Integrated Platform ◽  
Hard And Brittle Materials ◽  
Ultra Precision ◽  
Cutting Experiments

Taper-cutting experiments are important means of exploring the nano-cutting mechanisms of hard and brittle materials. Under current cutting conditions, the brittle-ductile transition depth (BDTD) of a material can be obtained through a taper-cutting experiment. However, taper-cutting experiments mostly rely on ultra-precision machining tools, which have a low efficiency and high cost, and it is thus difficult to realize in situ measurements. For taper-cut surfaces, three-dimensional microscopy and two-dimensional image calculation methods are generally used to obtain the BDTDs of materials, which have a great degree of subjectivity, leading to low accuracy. In this paper, an integrated system-processing platform is designed and established in order to realize the processing, measurement, and evaluation of taper-cutting experiments on hard and brittle materials. A spectral confocal sensor is introduced to assist in the assembly and adjustment of the workpiece. This system can directly perform taper-cutting experiments rather than using ultra-precision machining tools, and a small white light interference sensor is integrated for in situ measurement of the three-dimensional topography of the cutting surface. A method for the calculation of BDTD is proposed in order to accurately obtain the BDTDs of materials based on three-dimensional data that are supplemented by two-dimensional images. The results show that the cutting effects of the integrated platform on taper cutting have a strong agreement with the effects of ultra-precision machining tools, thus proving the stability and reliability of the integrated platform. The two-dimensional image measurement results show that the proposed measurement method is accurate and feasible. Finally, microstructure arrays were fabricated on the integrated platform as a typical case of a high-precision application.

Sign in / Sign up

Export Citation Format

Share Document