scholarly journals SERS-based trace detection by size and shape controlled noble metal particles with high benefit-cost ratio

2021 ◽  
Author(s):  
Özge Demirtas ◽  
Ghazanfar Ali Khan ◽  
Nasim Seyedpour Esmaeilzad ◽  
R. M. Faheem Iftikhar ◽  
İ. Murat Öztürk ◽  
...  
Keyword(s):  
Noble Metal ◽  
Metal Particles ◽  
Cost Ratio ◽  
Trace Detection ◽  
Size And Shape ◽  
Benefit Cost Ratio ◽  
Shape Controlled ◽  
High Benefit ◽  
Benefit Cost

Research on Hardware-in-the-Loop Simulation System for Terminally Guided Projectile Guidance and Control System

2013 ◽  
Vol 655-657 ◽  
pp. 1479-1483
Author(s):  
Jiu Hui Ding ◽  
Bai Wei Guo ◽  
Shuang Wei
Keyword(s):  
Control System ◽  
Cost Ratio ◽  
Hardware In The Loop ◽  
Benefit Cost Ratio ◽  
Guidance And Control ◽  
Comparison Results ◽  
Simulation Results ◽  
High Benefit ◽  
Benefit Cost ◽  
And Control

one hardware-in-the-loop simulation (referred to HILS) system for terminally guided projectile guidance and control system has been built, based on the analysis to the demand of HILS for the guidance and control system of the terminally guided projectile. The running process and the comparison results of the HILS & mathematical simulation have been given. The simulation results show that the movement of the terminally guided projectile could be simulated by the HILS system, which has a high benefit-cost ratio and confidence.

scholarly journals Effect of Novel Herbicides and Herbicide Mixtures on Yield and Economics of Transplanted Rice

2020 ◽  
pp. 159-163
Author(s):  
B. Venkatesh ◽  
Y. S. Parameswari ◽  
M. Madhavi ◽  
T. Ram Prakash
Keyword(s):  
Cost Ratio ◽  
Benefit Cost Ratio ◽  
Net Returns ◽  
Transplanted Rice ◽  
Plot Yield ◽  
Herbicide Mixture ◽  
Herbicide Mixtures ◽  
High Benefit ◽  
Hand Weeding ◽  
Benefit Cost

A field experiment was conducted during kharif, 2019 at Professor Jayashankar Telangana State Agricultural University, Rajendranagar, Hyderabad. The experiment done with twelve treatments and three replications. The study was taken to find out which herbicide mixture most effective in controlling of weeds leads to maximum yields with higher benefit cost ratio. The results revealed that, application of herbicide mixture florpyrauxifen-benzyl + cyhalofop-butyl 10% EC 150 g/ha PoE fb hand weeding at 40 days after transplanting (DAT) gave higher yields and net returns with high benefit cost ratio (B: C) which was statistically on par with minimum competitive plot. Unweeded plot yield was deviated about 48 % compare to florpyrauxifen-benzyl + cyhalofop-butyl 10% EC 150 g/ha PoE fb hand weeding at 40 days after transplanting.

scholarly journals Evaluation of new molecule of insecticides against pod fly (Melanagromyza obtusa) of pigeon pea

2014 ◽  
Vol 12 (1) ◽  
pp. 89-95
Author(s):  
AK Singh
Keyword(s):  
Chemical Control ◽  
Crop Protection ◽  
Pigeon Pea ◽  
Cost Ratio ◽  
Control Methods ◽  
Benefit Cost Ratio ◽  
Grain Damage ◽  
High Benefit ◽  
Benefit Cost ◽  
Protection Pattern

Pod fly [Melanagromyza obtusa (Malloch)] is a key biotic constraint for productivity in subsistence crop protection pattern; its damage varies up to 80%; has been estimated about US $ 256 million annually. The research trial was accomplished at Research Farm of SASRD, Nagaland University during Kharif 2011 and 2012 in order to evaluate the new molecules against pod fly. The experiment was consisted 6 treatments (Trizophos 500 g ai. ha-1, Emamectine benzoate 11 g ai. ha-1, Emamectine benzoate 11 g ai. ha-1 + Acetamiprid 30 g ai. ha-1, Flubendiamide 47 g ai. ha-1, Chlorantraniliprole 40 g ai. ha-1 and Spinosade 75 g ai. ha-1) compare with control. The lowest pod damage (9.7% and 9.3%), lowest grain damage (5.3% and 5%) and highest grain yield (1202 kg ha-1 and 1209 kg ha-1) were obtained from Chlorantraniliprole followed by Emamectine benzoate+ Acetamiprid, Spinosade, Emamectine benzoate, Flubendiamide, Trizophos and all the treatments were significantly superior over control. The highest B: C ratio reward (1:4.24) was obtained from Chlorantraniliprole. The results indicated that Chlorantraniliprole was more effectual against pod damage, grain damage, yield and B: C ratio. The safer chemical control methods reduce the pod damage, grain damage and higher yield with high benefit: cost ratio, so therefore chemical control popularizes as an effective, practical alternative and makes lucrative cultivation of pigeon pea. DOI: http://dx.doi.org/10.3329/sja.v12i1.21115 SAARC J. Agri., 12(1): 89-95 (2014)

scholarly journals E-Skin Bimodal Sensors for Robotics and Prosthesis Using PDMS Molds Engraved by Laser

Sensors ◽  
2019 ◽  
Vol 19 (4) ◽  
pp. 899 ◽  
Author(s):  
Andreia dos Santos ◽  
Nuno Pinela ◽  
Pedro Alves ◽  
Rodrigo Santos ◽  
Ricardo Farinha ◽  
...  
Keyword(s):  
Low Cost ◽  
Cost Ratio ◽  
Laser Engraving ◽  
Pressure Sensing ◽  
Benefit Cost Ratio ◽  
Piezoresistive Sensors ◽  
Alternative Approach ◽  
High Benefit ◽  
Benefit Cost ◽  
Higher Sensitivity

Electronic skin (e-skin) is pursued as a key component in robotics and prosthesis to confer them sensing properties that mimic human skin. For pressure monitoring, a great emphasis on piezoresistive sensors was registered due to the simplicity of sensor design and readout mechanism. For higher sensitivity, films composing these sensors may be micro-structured, usually by expensive photolithography techniques or low-cost and low-customizable molds. Sensors commonly present different sensitivities in different pressure ranges, which should be avoided in robotics and prosthesis applications. The combination of pressure sensing and temperature is also relevant for the field and has room for improvement. This work proposes an alternative approach for film micro-structuration based on the production of highly customizable and low-cost molds through laser engraving. These bimodal e-skin piezoresistive and temperature sensors could achieve a stable sensitivity of −6.4 × 10−3 kPa−1 from 1.6 kPa to 100 kPa, with a very robust and reproducible performance over 27,500 cycles of objects grasping and releasing and an exceptionally high temperature coefficient of resistance (TCR) of 8.3%/°C. These results point toward the versatility and high benefit/cost ratio of the laser engraving technique to produce sensors with a suitable performance for robotics and functional prosthesis.

scholarly journals Yield and economics of chilli hybrid Sitara with the use of different nutrient management practices and organic amendments

2018 ◽  
Author(s):  
B. M. Ranjitha ◽  
T. B. Allolli ◽  
D. R. Jhanavi ◽  
N. Kavyashree ◽  
S. Gururaj ◽  
...  
Keyword(s):  
Field Experiment ◽  
Management Practices ◽  
Nutrient Management ◽  
Maximum Yield ◽  
Organic Amendments ◽  
Cost Ratio ◽  
Benefit Cost Ratio ◽  
Yield Parameters ◽  
High Benefit ◽  
Benefit Cost

A field experiment was conducted in Dharwad district, Karnataka during kharif season of 2015-2016, with an objective to assess the effectiveness of nutrient management practices and organic amendments on yield and economics of chilli (Capsicum annuum L.) hybrid Sitara. The results revealed that the maximum yield parameters were recorded due to adoption of INM practices (among nutrient management practices) and Panchagavya (among organic amendments). INM practices and Panchagavya recorded high Benefit: cost ratio of 2.7 and 2.6 respectively.

Efficacy of new insecticides against okra shoot and fruit borer, Earias vitella (Fb.) (Lepidoptera: Noctuidae)

ENTOMON ◽  
2020 ◽  
Vol 45 (4) ◽  
pp. 295-300
Author(s):  
Reshma Chandran ◽  
B. Ramesha ◽  
K.M. Sreekumar
Keyword(s):  
Total Yield ◽  
Summer Season ◽  
Cost Ratio ◽  
Marketable Yield ◽  
Benefit Cost Ratio ◽  
Fruit Borer ◽  
Fruit Damage ◽  
High Benefit ◽  
Benefit Cost ◽  
Lepidoptera Noctuidae

A field study conducted to evaluate the efficacy of new molecules against okra shoot and fruit borer, Earias vitella (Fb.) during rabi and summer season revealed that Chlorantraniliprole 8.8% + Thiamethoxam17.5% SC @ 0.7 ml/l significantly reduced the percentage of shoot and fruit damage. No shoot and fruit infestation was recorded at seven and fourteen days after treatment. It was on par with the standard check Chlorantraniliprole 18.5 SC @ 0.3 ml/l followed by Novaluron 10 EC @ 2 ml/l and Lamdacyhalothrin 4.6% + Chlorantraniliprole 9.3% ZC. Chlorantraniliprole 8.8% + Thiamethoxam17.5% SC treated plots recorded highest total yield of 469.86 and 594.31 g/plant respectively. Maximum marketable yield was also recorded from Chlorantraniliprole 8.8% + Thiamethoxam17.5% SC treated plots respectively. Chlorantraniliprole 8.8% + Thiamethoxam17.5% SC also showed high benefit-cost ratio of 2.42 and 3.12 during rabi and summer season respectively.

scholarly journals Towards reliable in vitro models – New bi-compartmental platforms for replicating tissue barriers

2021 ◽  
Vol 4 (s1) ◽  
Author(s):  
Lorenzo P. Coppadoro ◽  
Elia Pederzani ◽  
Chiara Foglieni ◽  
Maria Lombardi ◽  
Gianfranco B. Fiore ◽  
...  
Keyword(s):  
Cell Cultures ◽  
Culture System ◽  
Cost Ratio ◽  
Tissue Cultures ◽  
Benefit Cost Ratio ◽  
Cell Tissue ◽  
High Benefit ◽  
In Vitro Cell Cultures ◽  
Benefit Cost

In vitro cell cultures represent a widespread methodology for pathophysiology studies with a high benefit/cost ratio. We have developed and are validating TToP, a novel, versatile, and scalable culture system allowing compartmentalized cell/tissue cultures with the aim of mimicking the human pathophysiological microenvironment of tissue barriers.

The impact of telemedicine on the quality and satisfaction with the health care provided during the COVID-19 pandemic in the field of pediatrics with special reference to the surgical professions

2021 ◽  
Vol 93 (6) ◽  
pp. 53-60
Author(s):  
Marko Bašković
Keyword(s):  
New Technologies ◽  
Learning Ability ◽  
Cost Ratio ◽  
Benefit Cost Ratio ◽  
Surgical Services ◽  
Safe Technique ◽  
High Benefit ◽  
Benefit Cost ◽  
The Impact

The COVID-19 pandemic has forced healthcare systems around the world to adopt telemedicine at an unprecedented rate. Visits to telemedicine have increased to provide access and maintain continuity of care. Internet access has almost become a necessity, and new technologies allow for the easy flow of data from patient to doctor and vice versa. Doctors of all specialties were forced to adapt to the pandemic and emerging conditions. The provision of surgical services and the learning ability of surgeons are particularly disrupted, and the pediatric surgical community is not exempt. During the pandemic, telemedicine proved to be a viable and safe technique for providing health services. In an environment of a health system that is constantly facing a shortage of resources, effective telemedicine placement can come with a high benefit-cost ratio and quality of care, while ensuring patient satisfaction.

scholarly journals Impact of front line demonstration of chickpea (JG 63) in Chhatarpur district of Madhya Pradesh, India

2021 ◽  
Vol 17 (AAEBSSD) ◽  
pp. 307-310
Author(s):  
Arpita Shrivastava ◽  
Smita Singh ◽  
Veena Pani Shrivastava ◽  
Uttam Kumar Tripathi
Keyword(s):  
Fertilizer Application ◽  
Cost Ratio ◽  
Benefit Cost Ratio ◽  
Pooled Data ◽  
High Benefit ◽  
Gap Technology ◽  
Benefit Cost ◽  
Improved Technology ◽  
Extension Gap ◽  
Technical Guidance

The present investigation was carried out at the adopted villages of Krishi Vigyan Kendra, Chhatarpur during 2017-18 to demonstrate the improved variety JG 63 with the scientific package and practices to improve the production of chickpea. The treatment comprised of scientific package of practices (Improved variety JG 63 + seed treatment with Carbendazim 3g/ kg of seed and seed inoculation with Rhizobium and PSB culture each @ 10 g/ kg of seed + soil test value based fertilizer application + line sowing + adoption of IPM technique). The demonstration plot exhibited higher yield as compared to farmers plot. An average yield of chickpea in the demonstrated plot was 18.74 q/ha as compare to farmers practices 14.16 q/ha in the three years of pooled data. The improved technology gives the higher return with the high benefit cost ratio as farmer’s practices. The observed extension gap, technology gap and technology index were 4.58 q/ha, 1.26 q/ha and 6.30%, respectively. The improved variety with scientific package of practices and technical guidance contributed to increase production of chickpea and profitability of the farmers of the district.

Comparative Effectiveness Of Seed Treating And Foliar Insecticides Against Sucking Pests Of Cotton And Impact On Their Natural Enemies

2013 ◽  
Vol 38 (1) ◽  
pp. 61-70 ◽  
Author(s):  
SMA Hossain ◽  
MA Baque ◽  
MR Amin
Keyword(s):  
Natural Enemies ◽  
Untreated Control ◽  
Seed Treatment ◽  
Foliar Spray ◽  
Cost Ratio ◽  
Research Station ◽  
Benefit Cost Ratio ◽  
Benefit Cost ◽  
Thrips Population ◽  
Cotton Cultivar

The Imidacloprid insecticide, Gaucho 70 WS at 1.5, 2.5, 3.5, 4.5 and 5.5 g/kg seed was used as seed treatment and monocrotophos 40 WSC at 1120 ml/ha was applied as foliar spray on CB9 cotton cultivar to suppress aphid, whitefly and thrips, and impact on their natural enemies during 2008-2011 at the Regional Cotton Research Station, Dinajpur, Bangladesh. The activity of natural enemies, such as ladybird beetle, lacewing, syrphid, and spider population on the sucking pests attacking cotton cultivar CB9 and yield of cotton were recorded. Imidacloprid significantly reduced aphid, whitefly, and thrips population on cotton crops compared to untreated control or foliar spray of monocrotophos 40 WSC at 1120 ml/ha. Ladybird beetles, lacewings, syrphids, and spiders were abundant in the field but their population decreased in the treated plots compared to untreated control. The CB9 cotton cultivar produced significantly higher yield (1.73 t/ha) with a benefit cost ratio 12.47 when seeds were treated with Imidacloprid at 5.5 g/kg fuzzy seed. This study indicated that Imidacloprid (Gaucho 70 WS) used as a seed treatment may be suggested to the cotton growers for controlling sucking pests. Bangladesh J. Agril. Res. 38(1): 61-70, March 2013 DOI: http://dx.doi.org/10.3329/bjar.v38i1.15190

Sign in / Sign up

Export Citation Format

Share Document