Guided wave techniques for damage detection and property characterization in composite aerospace structures

2019 ◽  
Author(s):  
Margherita Capriotti ◽  
Ranting Cui ◽  
Francesco Lanza di Scalea
Keyword(s):  
Damage Detection ◽  
Guided Wave ◽  
Aerospace Structures ◽  
Property Characterization

IMPACT DAMAGE DETECTION IN COMPOSITE AEROSPACE STRUCTURES BY MULTI-RESOLUTION NDE INSPECTIONS

2021 ◽  
Author(s):  
MARGHERITA CAPRIOTTI ◽  
ANDREW ELLISON ◽  
HYUNGSUK E. KIM ◽  
FRANCESCO LANZA DI SCALEA ◽  
HYONNY KIM
Keyword(s):  
Damage Detection ◽  
Damage Mechanics ◽  
Complex Geometry ◽  
Impact Damage ◽  
Ct Scanning ◽  
Quantitative Information ◽  
Guided Wave ◽  
Mode Interaction ◽  
Damage State ◽  
Aerospace Structures

Assessing the health of aerospace structures and understanding the underlying mechanics that govern composite strength constitute a main focus of research in the area of aerospace design and airworthiness certification. Impact damage is one of the major threats to composite aerospace structures for its frequency of occurrence, complexity and minimum external visibility. While non-destructive evaluation (NDE) provides a variety of solutions to inspect the subsurface and internal components of structures non-invasively, a gap exists between the mechanics of damage formation, growth and tolerance, and the inspectability of the structure. This study is focused on the quantitative correlation between impact damage mechanics and ultrasonic NDE inspections, where damage severity, mode interaction and progression are identified in real-scale composite panels of complex geometry, representative of commercial aircraft, impacted to reproduce different damage types at the skin-to-stringer interface and the stringer cap. High resolution X-ray CT scanning and conventional ultrasonic scanning (UT) have been used to map the damage state and identify relevant impact damage features. Ultrasonic guided wave (UGW) scanning was then employed as a rapid in-situ inspection technique to not only detect damage but also provide quantitative information about damage severity and mode. The correlation of multi-resolution multi-dimensional NDE data promises new insights on damage studies and solutions to damage detection and prognosis through viable NDE inspections.

Experimental Research on Damages Detection of Pipeline Structure by Using PZT-Based Waves

2011 ◽  
Author(s):  
Shi Yan ◽  
Binbin He ◽  
Naizhi Zhao
Keyword(s):  
Damage Detection ◽  
Lead Zirconate Titanate ◽  
Smart Materials ◽  
Arrival Time ◽  
Mode Conversion ◽  
Guided Wave ◽  
The Other ◽  
Damage Location ◽  
The Waves ◽  
Peak Value

Pipeline structure may generate damages during its service life due to the influence of environment or accidental loading. The damages need to be detected and repaired if they are severe enough to influence the transportation work. Non-destructive detection using smart materials combined with suitable diagonal algorithms are widely used in the field of structural health monitoring (SHM). Piezoelectric ceramics (such as Lead Zirconate Titanate, PZT) is one of the smart materials to be applied in the SHM due to the piezoelectric effect. So far, the PZT-based wave method is widely used for damage detection of structures, in particular, pipeline structures. A series of piezoelectric patches are bonded on the surface of the pipeline structure to monitor the damages such as local crack or effective area reduction due to corrosion by using diagonal waves. The damage of the pipeline structure can be detected by analysis of the received diagonal waves which peak value, phase, and arriving time can be deferent from the health ones. The response of the diagonal wave is not only correlated to the damage location through estimation of the arrival time of the wave peak, but also associated with the peak value of the wave for the reduction of wave energy as the guided wave passing through the damages. Therefore, the presence of damages in the pipeline structure can be detected by investigating the parameter change of the guided waves. The change of the wave parameters represents the attenuation, deflection and mode conversion of the waves due to the damages. In addition, the guided wave has the ability of quick detecting the damage of the pipeline structure and the simplicity of generating and receiving detection waves by using PZT patches. To verify the proposed method, an experiment is designed and tested by using a steel pipe bonded the PZT patches on the surface of it. The PZT patches consist of an array to estimate the location and level of the damage which is simulated by an artificial notch on the surface of the structure. The several locations and deep heights of the notches are considered during the test. A pair of the PZT patches are used at the same time as one is used as an actuator and the other as a sensor, respectively. A tone burst of 5 cycles of wave shape is used during the experiment. A wave generator is applied to create the proposed waves, and the waves are amplified by an amplifier to actuate the PZT patch to emit the diagonal waves with appropriately enough energy. Meanwhile, the other PZT patch is used as a sensor to receive the diagonal signals which contain the information of the damages for processing. For data processing, an index of root mean square deviation (RMSD) of the received data is used to estimate the damage level by compare of the data between the damaged and the health peak valves of the received signals. The time reversal method which aimed at increasing the efficiency of the detection is also used to detect the damage location by estimating the arrival time of the reflected wave passing with a certain velocity. The proposed method experimentally validates that it is effective for application in damage detection of pipeline structure.

Guided wave‐based cable damage detection using wave energy transmission and reflection

2021 ◽  
Author(s):  
Zhi‐Feng Tang ◽  
Xiao‐Dong Sui ◽  
Yuan‐Feng Duan ◽  
Peng‐fei Zhang ◽  
Chung Bang Yun
Keyword(s):  
Damage Detection ◽  
Wave Energy ◽  
Guided Wave ◽  
Energy Transmission ◽  
Cable Damage ◽  
Transmission And Reflection

scholarly journals Lamb Wave Scattering Analysis for Interface Damage Detection between a Surface-Mounted Block and Elastic Plate

Sensors ◽  
2021 ◽  
Vol 21 (3) ◽  
pp. 860
Author(s):  
Mikhail V. Golub ◽  
Alisa N. Shpak ◽  
Inka Mueller ◽  
Sergey I. Fomenko ◽  
Claus-Peter Fritzen
Keyword(s):  
Damage Detection ◽  
Elastic Plate ◽  
Lamb Wave ◽  
Wave Scattering ◽  
Hybrid Approach ◽  
Guided Wave ◽  
Open Crack ◽  
Damage Indices ◽  
Impulse Function ◽  
Thin Walled

Since stringers are often applied in engineering constructions to improve thin-walled structures’ strength, methods for damage detection at the joints between the stringer and the thin-walled structure are necessary. A 2D mathematical model was employed to simulate Lamb wave excitation and sensing via rectangular piezoelectric-wafer active transducers mounted on the surface of an elastic plate with rectangular surface-bonded obstacles (stiffeners) with interface defects. The results of a 2D simulation using the finite element method and the semi-analytical hybrid approach were validated experimentally using laser Doppler vibrometry for fully bonded and semi-debonded rectangular obstacles. A numerical analysis of fundamental Lamb wave scattering via rectangular stiffeners in different bonding states is presented. Two kinds of interfacial defects between the stiffener and the plate are considered: the partial degradation of the adhesive at the interface and an open crack. Damage indices calculated using the data obtained from a sensor are analyzed numerically. The choice of an input impulse function applied at the piezoelectric actuator is discussed from the perspective of the development of guided-wave-based structural health monitoring techniques for damage detection.

Functional Coatings for Damage Detection in Aerospace Structures

2021 ◽  
Vol 22 (1) ◽  
pp. 95-103
Author(s):  
Agathe Demay ◽  
Johnathan Hernandez ◽  
Perla Latorre ◽  
Remelisa Esteves ◽  
Seetha Raghavan
Keyword(s):  
Damage Detection ◽  
High Performance ◽  
Structural Integrity ◽  
Alumina Nanoparticles ◽  
Functional Coatings ◽  
Aerospace Structures ◽  
Non Invasive ◽  
Damage Sensing ◽  
Composite Substrate ◽  
Open Hole

The future of aerospace structures is highly dependent on the advancement of reliable and high-performance materials, such as composite materials and metals. Innovation in high resolution non-invasive evaluation of these materials is needed for their qualification and monitoring for structural integrity. Aluminum oxide (or α-alumina) nanoparticles present photoluminescent properties that allow stress and damage sensing via photoluminescence piezospectroscopy. This work describes how these nanoparticles are added into a polymer matrix to create functional coatings that monitor the damage of the underlying composite or metallic substrates. Different volume fractions of α-alumina nanoparticles in the piezospectroscopic coatings were studied for determining the sensitivity of the coatings and successful damage detection was demonstrated for an open-hole tension composite substrate as well as 2024 aluminum tensile substrates with a subsurface notch.

Circumference Damage Identification in a Pipe Using Mode Conversion of Longitudinal Guided Wave

2013 ◽  
Vol 395-396 ◽  
pp. 787-791
Author(s):  
Jing Wu ◽  
Wei Wei Zhang
Keyword(s):  
Damage Detection ◽  
Damage Identification ◽  
Mode Conversion ◽  
Guided Wave ◽  
Symmetric Mode ◽  
Axially Symmetric ◽  
Mode Transformation ◽  
Damage Location

This paper aims to develop a method to identify the damage location in circumference direction of a pipe using mode transformation of longitudinal guided wave. The corrosion-like damage in bimetal pipe is considered. Case study that damage detection for a bimetal pipe is used to show the validity and advantage of the proposed method. It can be found that the axially symmetric mode guided wave encounter the damage and the three modes were received in reflection. The damage location in circumferential directions could be identified by conversed modes measured at one position. The simulation shows a good performance.

scholarly journals Numerical Simulation on Micro-damage Detection In CFRP Composites Based on Nonlinear Ultrasonic Guided Waves

2021 ◽  
Keyword(s):  
Damage Detection ◽  
Composite Structures ◽  
Guided Waves ◽  
Second Harmonic ◽  
Wave Mode ◽  
Guided Wave ◽  
Reinforced Plastics ◽  
Matrix Cracks ◽  
Nonlinear Ultrasonic ◽  
Contact Acoustic Nonlinearity

Abstract. Micro-damages such as pores, closed delamination/debonding and fiber/matrix cracks in carbon fiber reinforced plastics (CFRP) are vital factors towards the performance of composite structures, which could collapse if defects are not detected in advance. Nonlinear ultrasonic technologies, especially ones involving guided waves, have drawn increasing attention for their better sensitivity to early damages than linear acoustic ones. The combination of nonlinear acoustics and guided waves technique can promisingly provide considerable accuracy and efficiency for damage assessment and materials characterization. Herein, numerical simulations in terms of finite element method are conducted to investigate the feasibility of micro-damage detection in multi-layered CFRP plates using the second harmonic generation (SHG) of asymmetric Lamb guided wave mode. Contact acoustic nonlinearity (CAN) is introduced into the constitutive model of micro-damages in composites, which leads to the distinct SHG compared with material nonlinearity. The results suggest that the generated second order harmonics due to CAN could be received and adopted for early damage evaluation without matching the phase of the primary waves.

scholarly journals A Review of Non-Destructive Damage Detection Methods for Steel Wire Ropes

2019 ◽  
Vol 9 (13) ◽  
pp. 2771 ◽  
Author(s):  
Ping Zhou ◽  
Gongbo Zhou ◽  
Zhencai Zhu ◽  
Zhenzhi He ◽  
Xin Ding ◽  
...  
Keyword(s):  
Damage Detection ◽  
Detection Method ◽  
Steel Wire ◽  
Guided Wave ◽  
Detection Methods ◽  
Wire Ropes ◽  
Intelligent Sensors ◽  
Detection Technology ◽  
Damage States ◽  
Non Destructive

As an important load-bearing component, steel wire ropes (WRs) are widely used in complex systems such as mine hoists, cranes, ropeways, elevators, oil rigs, and cable-stayed bridges. Non-destructive damage detection for WRs is an important way to assess damage states to guarantee WR’s reliability and safety. With intelligent sensors, signal processing, and pattern recognition technology developing rapidly, this field has made great progress. However, there is a lack of a systematic review on technologies or methods introduced and employed, as well as research summaries and prospects in recent years. In order to bridge this gap, and to promote the development of non-destructive detection technology for WRs, we present an overview of non-destructive damage detection research of WRs and discuss the core issues on this topic in this paper. First, the WRs’ damage type is introduced, and its causes are explained. Then, we summarize several main non-destructive detection methods for WRs, including electromagnetic detection method, optical detection method, ultrasonic guided wave detection method, and acoustic emission detection method. Finally, a prospect is put forward. Based on the review of papers, we provide insight about the future of the non-destructive damage detection methods for steel WRs to a certain extent.

Sign in / Sign up

Export Citation Format

Share Document