Use of quartz halogen lamp in transient thermography imaging

2018 ◽  
Author(s):  
Meir Gershenson
Keyword(s):  
Halogen Lamp ◽  
Transient Thermography

scholarly journals Light-induced levitation of ultralight carbon aerogels via temperature control

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Reo Yanagi ◽  
Ren Takemoto ◽  
Kenta Ono ◽  
Tomonaga Ueno
Keyword(s):  
Carbon Nanotubes ◽  
Heat Capacity ◽  
Porous Materials ◽  
Temperature Control ◽  
Light Absorption ◽  
Carbon Aerogel ◽  
Carbon Aerogels ◽  
Halogen Lamp ◽  
Absorption Properties ◽  
Air Density

AbstractWe demonstrate that ultralight carbon aerogels with skeletal densities lesser than the air density can levitate in air, based on Archimedes' principle, when heated with light. Porous materials, such as aerogels, facilitate the fabrication of materials with density less than that of air. However, their apparent density increases because of the air inside the materials, and therefore, they cannot levitate in air under normal conditions. Ultralight carbon aerogels, fabricated using carbon nanotubes, have excellent light absorption properties and can be quickly heated by a lamp owing to their small heat capacity. In this study, an ultralight carbon aerogel was heated with a halogen lamp and levitated in air by expanding the air inside as well as selectively reducing its density. We also show that the levitation of the ultralight carbon aerogel can be easily controlled by turning the lamp on and off. These findings are expected to be useful for various applications of aerogels, such as in communication and transportation through the sky.

The tungsten halogen lamp decade

1970 ◽  
Vol 2 (2) ◽  
pp. 95-108 ◽  
Author(s):  
R. Burgin ◽  
E.F. Edwards
Keyword(s):  
Halogen Lamp ◽  
Tungsten Halogen Lamp

Annealing of Antimony Implanted Silicon with Halogen Lamp Irradiation

1982 ◽  
Vol 72 (2) ◽  
pp. K173-K176 ◽  
Author(s):  
V. E. Borisenko ◽  
V. A. Labunov
Keyword(s):  
Halogen Lamp

scholarly journals Clinical Evaluation of Bracket Bonding Using Two Different Polymerization Sources

2008 ◽  
Vol 78 (5) ◽  
pp. 922-925 ◽  
Author(s):  
Nikolaos S. Koupis ◽  
Theodore Eliades ◽  
Athanasios E. Athanasiou
Keyword(s):  
Failure Rate ◽  
Orthodontic Treatment ◽  
Light Emitting Diode ◽  
Rank Test ◽  
Dental Arch ◽  
Halogen Lamp ◽  
Failure Rates ◽  
Bond Failure ◽  
Significant Difference ◽  
The Right

Abstract Objective: To comparatively assess clinical failure rate of brackets cured with two different photopolymerization sources after nine months of orthodontic treatment. Materials and Methods: The sample of this study comprised 30 patients who received comprehensive orthodontic treatment by means of fixed appliances. Using the same adhesive, 600 stainless steel brackets were directly bonded and light cured for 10 seconds with the light-emitting diode (LED) lamp or for 20 seconds with the conventional halogen lamp. A split-mouth design randomly alternated from patient to patient was applied. Failure rates were recorded for nine months and analyzed with Pearson χ2 test, and log-rank test at α = .05 level of significance. Results: The overall failure rate recorded with the halogen unit (3.33%) was not significantly different from the failure rate for the LED lamp (5.00%). Significantly more failures were found in boys compared with girls, in the mandibular dental arch compared with the maxillary arch, and in posterior segments compared with anterior segments. However, no significant difference was found between the right and left segments. Conclusion: Both light-curing units showed sufficiently low bond failure rates. LED curing units are an advantageous alternative to conventional halogen sources in orthodontics because they enable a reduced chair-time bonding procedure without significantly affecting bond failure rate.

Transient thermography using evanescent microwave microscope

1999 ◽  
Vol 70 (8) ◽  
pp. 3387-3390 ◽  
Author(s):  
M. Tabib-Azar ◽  
R. Ciocan ◽  
G. Ponchak ◽  
S. R. LeClair
Keyword(s):  
Microwave Microscope ◽  
Transient Thermography

Ag-TiO2 Nanocomposites: visible or solar light driven plasmonic photocatalysis?

2021 ◽  
Vol 02 ◽  
Author(s):  
Larissa Bach-Toledo ◽  
Patricio G. Peralta-Zamora ◽  
Liziê Daniela Tentler Prola
Keyword(s):  
Photocatalytic Activity ◽  
Solar Radiation ◽  
Noble Metals ◽  
Halogen Lamp ◽  
Tio2 Surface ◽  
Electronic Microscopy ◽  
Visible Radiation ◽  
Artificial Uv ◽  
Positive Effect

Background: The demand for photocatalytic processes assisted by solar radiation has stimulated the upgrading of established systems, as the semiconductor modification with noble metals. Objective: the synthesis, characterization, and photocatalytic activity evaluation of the Ag-TiO2, against sulfamethoxazole molecule, and investigate the significance of the plasmonic phenomenon in Visible (450 - 1000nm) and UV-Vis (315-800 nm) radiation. Methods: Different nanocomposites Ag/TiO2 ratios were synthesized by the deposition of Ag nanoparticles on the TiO2 surface by in-situ photoreduction, and then calcinated at 400°C for 2 hr. The chemical-physical properties of the materials were examined by UV-Vis Diffuse Reflectance (UV-Vis DRS) Scanning Electronic Microscopy (SEM), Transmission Electronic Microscopy (TEM), X-Ray Energy Dispersive Spectroscopy (EDS). The experiments were conducted in a cooled photochemical reactor irradiated by halogen lamp (250W). The degradation of Sulfamethoxazole was monitored by HPLC-DAD. Results: Although the prepared photocatalysts show an intense plasmonic band centered at 500 nm, no photocatalytic activity was observed in the process assisted by artificial visible radiation ( ≥ 450 nm). In processes assisted by artificial UV-Vis radiation, the photolysis rate of the model compound (sulfamethoxazole) was higher than the photocatalytic rate, and in the absence of UV radiation, all the reactions were inhibited. The positive effect of the presence of silver nanoparticles onto the TiO2 surface was only evidenced in studies involving solar radiation. Conclusion: The results suggest the need for a balance between UV and Vis radiation to activate the nanocomposite and perform the sulfamethoxazole degradation.

Sign in / Sign up

Export Citation Format

Share Document