A large-scale adaptive magnetorheological elastomer-based bridge bearing

2017 ◽  
Author(s):  
Siddaiah Yarra ◽  
Majid Behrooz ◽  
Gokhan Pekcan ◽  
Ahmad Itani ◽  
Faramarz Gordaninejad
Keyword(s):  
Large Scale ◽  
Magnetorheological Elastomer ◽  
Bridge Bearing

Development and Modeling of a Highly-Adjustable Base Isolator Utilizing Magnetorheological Elastomer

2013 ◽  
Author(s):  
Yancheng Li ◽  
Jianchun Li
Keyword(s):  
Analytical Model ◽  
Seismic Isolation ◽  
Large Scale ◽  
Lateral Stiffness ◽  
Magnetorheological Elastomer ◽  
Isolation System ◽  
Vertical Loading ◽  
Base Isolator ◽  
Field Dependent ◽  
Dependent Property

This paper presents a recent research breakthrough on the development of a novel adaptive seismic isolation system as the quest for seismic protection for civil structures, utilizing the field-dependent property of the magnetorheological elastomer (MRE). A highly-adjustable MRE base isolator was developed as the key element to form smart seismic isolation system. The novel isolator contains unique laminated structure of steel and MRE layers, which enable its large-scale civil engineering applications, and a solenoid to provide sufficient and uniform magnetic field for energizing the field-dependent property of MR elastomers. With the controllable shear modulus/damping of the MR elastomer, the developed adaptive base isolator possesses a controllable lateral stiffness while maintaining adequate vertical loading capacity. Experimental results show that the prototypical MRE base isolator provides amazing increase of lateral stiffness up to 1630%. Such range of increase of the controllable stiffness of the base isolator makes it highly practical for developing new adaptive base isolation system utilizing either semi-active or smart passive controls. To facilitate the structural control development using the adaptive MRE base isolator, an analytical model was developed to stimulate its behaviors. Comparison between the analytical model and experimental data proves the effectiveness of such model in reproducing the behavior of MRE base isolator, including the observed strain stiffening effect.

A self-sensing magnetorheological elastomer-based adaptive bridge bearing with a wireless data monitoring system

2016 ◽  
Author(s):  
Majid Behrooz ◽  
Siddaiah Yarra ◽  
David Mar ◽  
Nathan Pinuelas ◽  
Blake Muzinich ◽  
...  
Keyword(s):  
Monitoring System ◽  
Data Monitoring ◽  
Magnetorheological Elastomer ◽  
Wireless Data ◽  
Bridge Bearing

Performance of a large-scale magnetorheological elastomer–based vibration isolator for highway bridges

2018 ◽  
Vol 29 (20) ◽  
pp. 3890-3901 ◽  
Author(s):  
Siddaiah Yarra ◽  
Faramarz Gordaninejad ◽  
Majid Behrooz ◽  
Gokhan Pekcan ◽  
Ahmad M Itani ◽  
...  
Keyword(s):  
Large Scale ◽  
Compressive Force ◽  
Shear Stiffness ◽  
Highway Bridges ◽  
Loading Frequency ◽  
Vibration Isolator ◽  
Magnetorheological Elastomer ◽  
Lap Shear ◽  
Magnetorheological Effect ◽  
Bridge Bearings

This study presents an experimental investigation on the magnetorheological effect of a new magnetorheological elastomer–based adaptive bridge isolation bearing system. Two identical magnetorheological elastomer–based adaptive bridge bearings (isolators) were designed and fabricated. Electromagnets were incorporated to create a closed-loop magnetic path in the magnetorheological elastomer layers. A double-lap shear and compression test setup was utilized to characterize the mechanical properties of the system subjected to scaled structural cyclic forces and strains. Experimental results demonstrated that the effective stiffness of adaptive bridge bearings increases with increased applied magnetic field and a compressive force resulted in larger apparent shear stiffness. Also, increasing loading frequency resulted in larger apparent shear stiffness and lower magnetorheological effect and similarly, however, a compressive force resulted in smaller magnetorheological effects.

Some comments about observations and image processing of comet 29P/Schwassmann-Wachmann 1

1999 ◽  
Vol 173 ◽  
pp. 243-248
Author(s):  
D. Kubáček ◽  
A. Galád ◽  
A. Pravda
Keyword(s):  
Image Processing ◽  
Large Scale ◽  
Harvard College ◽  
Oak Ridge ◽  
Large Scale Structures ◽  
Short Period Comet ◽  
Short Period ◽  
Scale Structures ◽  
Harvard College Observatory ◽  
Period Comet

AbstractUnusual short-period comet 29P/Schwassmann-Wachmann 1 inspired many observers to explain its unpredictable outbursts. In this paper large scale structures and features from the inner part of the coma in time periods around outbursts are studied. CCD images were taken at Whipple Observatory, Mt. Hopkins, in 1989 and at Astronomical Observatory, Modra, from 1995 to 1998. Photographic plates of the comet were taken at Harvard College Observatory, Oak Ridge, from 1974 to 1982. The latter were digitized at first to apply the same techniques of image processing for optimizing the visibility of features in the coma during outbursts. Outbursts and coma structures show various shapes.

Evolution of Large-Scale Coronal Structures

1994 ◽  
Vol 144 ◽  
pp. 29-33
Author(s):  
P. Ambrož
Keyword(s):  
Magnetic Field ◽  
Field Line ◽  
Large Scale ◽  
Coronal Magnetic Field ◽  
Source Surface ◽  
Solar Cycles ◽  
Characteristic Relationship ◽  
The Magnetic Field ◽  
Coronal Structures

AbstractThe large-scale coronal structures observed during the sporadically visible solar eclipses were compared with the numerically extrapolated field-line structures of coronal magnetic field. A characteristic relationship between the observed structures of coronal plasma and the magnetic field line configurations was determined. The long-term evolution of large scale coronal structures inferred from photospheric magnetic observations in the course of 11- and 22-year solar cycles is described.Some known parameters, such as the source surface radius, or coronal rotation rate are discussed and actually interpreted. A relation between the large-scale photospheric magnetic field evolution and the coronal structure rearrangement is demonstrated.

Large-scale Motion of Solar Filaments

2000 ◽  
Vol 179 ◽  
pp. 205-208
Author(s):  
Pavel Ambrož ◽  
Alfred Schroll
Keyword(s):  
Magnetic Flux ◽  
Proper Motion ◽  
Time Scale ◽  
Large Scale ◽  
Accuracy Of Measurements ◽  
Solar Filaments ◽  
General Movement ◽  
Scale Motion ◽  
Velocity Scatter

AbstractPrecise measurements of heliographic position of solar filaments were used for determination of the proper motion of solar filaments on the time-scale of days. The filaments have a tendency to make a shaking or waving of the external structure and to make a general movement of whole filament body, coinciding with the transport of the magnetic flux in the photosphere. The velocity scatter of individual measured points is about one order higher than the accuracy of measurements.

Some applications of electron beam microanalysis techniques in VLSI process evaluation

1983 ◽  
Vol 41 ◽  
pp. 160-161
Author(s):  
Simon Thomas
Keyword(s):  
Integrated Circuits ◽  
Process Evaluation ◽  
Large Scale ◽  
Technology Development ◽  
Analytical Techniques ◽  
Successful Implementation ◽  
Analysis Of Failures ◽  
Characterization Of Materials ◽  
Circuits Vlsi

Trends in the technology development of very large scale integrated circuits (VLSI) have been in the direction of higher density of components with smaller dimensions. The scaling down of device dimensions has been not only laterally but also in depth. Such efforts in miniaturization bring with them new developments in materials and processing. Successful implementation of these efforts is, to a large extent, dependent on the proper understanding of the material properties, process technologies and reliability issues, through adequate analytical studies. The analytical instrumentation technology has, fortunately, kept pace with the basic requirements of devices with lateral dimensions in the micron/ submicron range and depths of the order of nonometers. Often, newer analytical techniques have emerged or the more conventional techniques have been adapted to meet the more stringent requirements. As such, a variety of analytical techniques are available today to aid an analyst in the efforts of VLSI process evaluation. Generally such analytical efforts are divided into the characterization of materials, evaluation of processing steps and the analysis of failures.

Distribution of c-protein isoforms in sarcomeres of developing chick skeletal muscle

1988 ◽  
Vol 46 ◽  
pp. 226-227
Author(s):  
D. A. Fischman ◽  
J. E. Dennis ◽  
T. Obinata ◽  
H. Takano-Ohmuro
Keyword(s):  
Skeletal Muscles ◽  
Thick Filament ◽  
Protein Isoforms ◽  
Actin Binding ◽  
Striated Muscles ◽  
C Protein ◽  
Sarcomeric Protein ◽  
Thick Filaments ◽  
Cross Bridges ◽  
Bridge Bearing

C-protein is a 150 kDa protein found within the A bands of all vertebrate cross-striated muscles. By immunoelectron microscopy, it has been demonstrated that C-protein is distributed along a series of 7-9 transverse stripes in the medial, cross-bridge bearing zone of each A band. This zone is now termed the C-zone of the sarcomere. Interest in this protein has been sparked by its striking distribution in the sarcomere: the transverse repeat between C-protein stripes is 43 nm, almost exactly 3 times the 14.3 nm axial repeat of myosin cross-bridges along the thick filaments. The precise packing of C-protein in the thick filament is still unknown. It is the only sarcomeric protein which binds to both myosin and actin, and the actin-binding is Ca-sensitive. In cardiac and slow, but not fast, skeletal muscles C-protein is phosphorylated. Amino acid composition suggests a protein of little or no αhelical content. Variant forms (isoforms) of C-protein have been identified in cardiac, slow and embryonic muscles.

Sign in / Sign up

Export Citation Format

Share Document