3D measurement of large-scale object using independent sensors

2017 ◽  
Author(s):  
Liu Yong ◽  
Jia Yuan ◽  
Jiang Yong ◽  
Xia Luo
Keyword(s):  
Large Scale ◽  
3D Measurement

Large-scale 3D Measurement Based on Laser Ranging

2015 ◽  
Author(s):  
Yan Zhuang ◽  
Qing Yang ◽  
Lizhong Tu ◽  
Dianliang Wu
Keyword(s):  
Large Scale ◽  
Laser Ranging ◽  
3D Measurement

scholarly journals Determination of Some Body Measurements of Camels With Three Dimensional Modeling Method (3D)

2021 ◽  
Author(s):  
Alkan çağlı ◽  
M. Yılmaz
Keyword(s):  
Large Scale ◽  
Three Dimensional ◽  
Practical Method ◽  
Modeling Method ◽  
The Body ◽  
Body Measurements ◽  
3D Measurement ◽  
Three Dimensional Modeling ◽  
Dimensional Modeling ◽  
The Difference

Abstract In this study, the use of three-dimensional modeling method was tested in taking some body measurements in camels with a practical method and was compared with other measurement methods. As the animal material of the study, 12 single humped dromedary female camels and 14 double humped Camelus dromedarius X Camelus bactrianus: F1 male camels, totally 26 camels, were used in three camel farms in Incirliova district of Aydın province. The body measurements taken from each animal by using different three methods, namely by Manuel Method (MM), by Photography Method (PM), and by Three Dimensional Modeling Method (3D) were the Cidago Height (CH), the Back Height (BH), the Rump Height (RH), the Body Length (BL), the Brisket Height (BRH), the Abdominal Height (AH), the Shoulder Width (SW) and the Rump Width (RW) and these values were compared with each other. As a result of this study, the mean values of MM and 3D measurement values were very close to each other and the difference between them was found to be statistically insignificant. (P<0.05). The difference between the means of PM and MM/3D measurement values was found to be significant. (P <0.05). In the measurements taken by MM, 3D, PM methods in male camels, the values obtained by MM and 3D methods for CH, BH, RH, BRH, AH, BL, and SW were very close to each other and the differences between them were found insignificant statistically (p < 0.05). On the determined regression graph, a linear was found between MM and 3D measurement values. As a result of this study, it has been determined that the 3D modeling method can be used as a remote and more practical method in determining the morphological features of large-scale animals such as camels more reliably, more easily and more practically.

2P1-S09 3D Measurement of Large-Scale Tunnel in a Highway and its Evaluation(ITS and Robot Technology)

2012 ◽  
Vol 2012 (0) ◽  
pp. _2P1-S09_1-_2P1-S09_4
Author(s):  
Shintaro ONO ◽  
Liang XUE ◽  
Atsuhiko BANNO ◽  
Takeshi OISHI ◽  
Yoshihiro SATO ◽  
...  
Keyword(s):  
Large Scale ◽  
3D Measurement ◽  
Robot Technology

Some comments about observations and image processing of comet 29P/Schwassmann-Wachmann 1

1999 ◽  
Vol 173 ◽  
pp. 243-248
Author(s):  
D. Kubáček ◽  
A. Galád ◽  
A. Pravda
Keyword(s):  
Image Processing ◽  
Large Scale ◽  
Harvard College ◽  
Oak Ridge ◽  
Large Scale Structures ◽  
Short Period Comet ◽  
Short Period ◽  
Scale Structures ◽  
Harvard College Observatory ◽  
Period Comet

AbstractUnusual short-period comet 29P/Schwassmann-Wachmann 1 inspired many observers to explain its unpredictable outbursts. In this paper large scale structures and features from the inner part of the coma in time periods around outbursts are studied. CCD images were taken at Whipple Observatory, Mt. Hopkins, in 1989 and at Astronomical Observatory, Modra, from 1995 to 1998. Photographic plates of the comet were taken at Harvard College Observatory, Oak Ridge, from 1974 to 1982. The latter were digitized at first to apply the same techniques of image processing for optimizing the visibility of features in the coma during outbursts. Outbursts and coma structures show various shapes.

Evolution of Large-Scale Coronal Structures

1994 ◽  
Vol 144 ◽  
pp. 29-33
Author(s):  
P. Ambrož
Keyword(s):  
Magnetic Field ◽  
Field Line ◽  
Large Scale ◽  
Coronal Magnetic Field ◽  
Source Surface ◽  
Solar Cycles ◽  
Characteristic Relationship ◽  
The Magnetic Field ◽  
Coronal Structures

AbstractThe large-scale coronal structures observed during the sporadically visible solar eclipses were compared with the numerically extrapolated field-line structures of coronal magnetic field. A characteristic relationship between the observed structures of coronal plasma and the magnetic field line configurations was determined. The long-term evolution of large scale coronal structures inferred from photospheric magnetic observations in the course of 11- and 22-year solar cycles is described.Some known parameters, such as the source surface radius, or coronal rotation rate are discussed and actually interpreted. A relation between the large-scale photospheric magnetic field evolution and the coronal structure rearrangement is demonstrated.

Large-scale Motion of Solar Filaments

2000 ◽  
Vol 179 ◽  
pp. 205-208
Author(s):  
Pavel Ambrož ◽  
Alfred Schroll
Keyword(s):  
Magnetic Flux ◽  
Proper Motion ◽  
Time Scale ◽  
Large Scale ◽  
Accuracy Of Measurements ◽  
Solar Filaments ◽  
General Movement ◽  
Scale Motion ◽  
Velocity Scatter

AbstractPrecise measurements of heliographic position of solar filaments were used for determination of the proper motion of solar filaments on the time-scale of days. The filaments have a tendency to make a shaking or waving of the external structure and to make a general movement of whole filament body, coinciding with the transport of the magnetic flux in the photosphere. The velocity scatter of individual measured points is about one order higher than the accuracy of measurements.

Some applications of electron beam microanalysis techniques in VLSI process evaluation

1983 ◽  
Vol 41 ◽  
pp. 160-161
Author(s):  
Simon Thomas
Keyword(s):  
Integrated Circuits ◽  
Process Evaluation ◽  
Large Scale ◽  
Technology Development ◽  
Analytical Techniques ◽  
Successful Implementation ◽  
Analysis Of Failures ◽  
Characterization Of Materials ◽  
Circuits Vlsi

Trends in the technology development of very large scale integrated circuits (VLSI) have been in the direction of higher density of components with smaller dimensions. The scaling down of device dimensions has been not only laterally but also in depth. Such efforts in miniaturization bring with them new developments in materials and processing. Successful implementation of these efforts is, to a large extent, dependent on the proper understanding of the material properties, process technologies and reliability issues, through adequate analytical studies. The analytical instrumentation technology has, fortunately, kept pace with the basic requirements of devices with lateral dimensions in the micron/ submicron range and depths of the order of nonometers. Often, newer analytical techniques have emerged or the more conventional techniques have been adapted to meet the more stringent requirements. As such, a variety of analytical techniques are available today to aid an analyst in the efforts of VLSI process evaluation. Generally such analytical efforts are divided into the characterization of materials, evaluation of processing steps and the analysis of failures.

Electron microscopy study of reactively sputter-deposited Ti/N films on silicon

1992 ◽  
Vol 50 (2) ◽  
pp. 1362-1363
Author(s):  
V. C. Kannan ◽  
A. K. Singh ◽  
R. B. Irwin ◽  
S. Chittipeddi ◽  
F. D. Nkansah ◽  
...  
Keyword(s):  
Integrated Circuits ◽  
Large Scale ◽  
Hexagonal Phase ◽  
Microscopy Study ◽  
Electron Microscopy Study ◽  
Process Conditions ◽  
Tin Films ◽  
Wide Range ◽  
Fcc Phase ◽  
Circuits Vlsi

Titanium nitride (TiN) films have historically been used as diffusion barrier between silicon and aluminum, as an adhesion layer for tungsten deposition and as an interconnect material etc. Recently, the role of TiN films as contact barriers in very large scale silicon integrated circuits (VLSI) has been extensively studied. TiN films have resistivities on the order of 20μ Ω-cm which is much lower than that of titanium (nearly 66μ Ω-cm). Deposited TiN films show resistivities which vary from 20 to 100μ Ω-cm depending upon the type of deposition and process conditions. TiNx is known to have a NaCl type crystal structure for a wide range of compositions. Change in color from metallic luster to gold reflects the stabilization of the TiNx (FCC) phase over the close packed Ti(N) hexagonal phase. It was found that TiN (1:1) ideal composition with the FCC (NaCl-type) structure gives the best electrical property.

Sign in / Sign up

Export Citation Format

Share Document