Optical fiber design considerations for fiber optic sensors

1994 ◽  
Author(s):  
Vincent P. Martinelli ◽  
John F. Wahl
Keyword(s):  
Optical Fiber ◽  
Fiber Optic ◽  
Fiber Optic Sensors ◽  
Design Considerations ◽  
Fiber Design

Automated Fiber-Optic System for Monitoring the Stability of the Pit Quarry Mass and Dumps

2021 ◽  
pp. 19-26
Author(s):  
А.D. Меkhtiyev ◽  
◽  
E.G. Neshina ◽  
P.Sh. Madi ◽  
D.A. Gorokhov ◽  
...  
Keyword(s):  
Rock Mass ◽  
Optical Fiber ◽  
Optical Fibers ◽  
Fiber Optic ◽  
Light Wave ◽  
Single Mode ◽  
Fiber Optic Sensors ◽  
Fiber Optic Sensor ◽  
Laboratory Sample ◽  
Single Mode Optical Fiber

This article ls with the issues related to the development of a system for monitoring the deformation and displacement of the rock mass leading to the collapse of the quarry sides. Monitoring system uses point-to-point fiber-optic sensors. Fiber-optic sensors and control cables of the communication line are made based on the single mode optical fibers, which allows to measure with high accuracy the deformations and displacements of the rock mass at a distance of 30-50 km. To create fiber-optic pressure sensors, an optical fiber of the ITU-T G. 652.D standard is used. Laboratory sample is developed concerning the point fiber-optic sensor made based on the two-arm Mach-Zender interferometer using a single mode optical fiber for monitoring strain (displacements) with a change in the sensitivity and a reduced influence of temperature interference leading to zero drift. The article presents a mathematical apparatus for calculating the intensity of radiation of a light wave passing through an optical fiber with and without mechanical stress. A laboratory sample of single mode optical fibers based on the Mach-Zender interferometer showed a fairly high linearity and accuracy in the measurement and can be used to control the strain of the mass after appropriate refinement of its design. Mathematical expressions are also given for determining the intensity of the light wave when the distance between the fixing points of a single mode optical fiber changes depending on the change in the external temperature. A diagram for measuring strain using a point fiber-optic strain sensor is developed. Hardware and software package is developed, which can be used to perform a number of settings of measuring channels. The work is aimed at solving the production problems of the Kenzhem quarry of AK Altynalmas JSC.

Theoretical Model and Design Considerations of U-Shaped Fiber Optic Sensors: A Review

2020 ◽  
Vol 20 (24) ◽  
pp. 14578-14589
Author(s):  
Alfred Jia Yee Tan ◽  
Sing Muk Ng ◽  
Paul R. Stoddart ◽  
Hong Siang Chua
Keyword(s):  
Theoretical Model ◽  
Fiber Optic ◽  
Fiber Optic Sensors ◽  
Design Considerations

Integrated Fiber Optic Sensors For Nondestructive Characterization Of Concrete Structures

1997 ◽  
Vol 503 ◽  
Author(s):  
F. Ansari
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
Fiber Optic ◽  
Optical Fiber Sensor ◽  
Fiber Optic Sensors ◽  
Fiber Sensors ◽  
Fully Integrated ◽  
Integrated Optical ◽  
Concrete Elements

ABSTRACTIt is possible to monitor the initiation and progress of various mechanical or environmentally induced perturbations in concrete elements by way of fully integrated optical fiber sensors. Geometric adaptability and ease by which optical fibers can be embedded within concrete elements has led to the development of a number of innovative applications for concrete elements. This article is intended for a brief introduction into the theories, principles, and applications of fiber optic sensors as they pertain to applications in concrete.. However, due to the fact that the transduction mechanism in optical fibers is invariant of the materials employed, the principles introduced here also correspond to other structural materials. The only application related differences among various materials pertain to sensitivity and choice of optical fiber sensor types.

scholarly journals Study Smart-layer effect on the physical and mechanical characteristics of the samples from polymer composite materials under quasi-static loading

2020 ◽  
pp. 188-200
Author(s):  
G. S Shipunov ◽  
M. A Baranov ◽  
A. S Nikiforov ◽  
D. V Golovin ◽  
A. A Tihonova
Keyword(s):  
Composite Materials ◽  
Optical Fiber ◽  
Polymer Composite ◽  
Static Loading ◽  
Mechanical Characteristics ◽  
Fiber Optic ◽  
Fiber Optic Sensors ◽  
Polymer Composite Materials ◽  
Physicomechanical Characteristics ◽  
Physical And Mechanical Characteristics

Currently, developments of the so-called Smart-constructions are relevant as they enable a real-time monitoring of changes in required values. Smart designs are widely used in the construction, automotive and aerospace industries. Technologies of creating products from polymer composite materials make it possible to introduce various sensors directly into the structure of a material, thereby create systems monitoring the state of structures. The most recommended for such implementation are fiber-optic sensors, which have a number of advantages over other sensors (luminescent, strain gauge, piezoelectric ones). However, when introducing the fiber-optic sensors, there is a number of difficulties, which are primarily associated with fragility of the optical fiber and lead to the breakdown of fiber-optic lines. As a result, it is necessary to develop a Smart-layer that will protect the optical fiber leads and will not significantly change the physical and mechanical characteristics. This paper aims to determine the stiffness and strength characteristics of samples made of polymer composite materials: reference samples, samples with embedded fiber-optic sensors, samples with embedded Smart-layers. In this work, a Smart-layer is understood as a coating that protects the fiber-optic sensors at the stage of implementation into a structure. The paper considers the following configurations of the Smart-layer: polymer reinforced mesh, polyamide and polyurethane layer. We analyzed and compared the influence of the embedded optical fiber and various configurations of the Smart-layer in the composite structure on the physicomechanical characteristics of the samples obtained under quasi-static loading (tension, compression, and interlayer shear). For a more detailed analysis of using the fiber-optic sensors and various configurations of the Smart-layer, the corresponding loads were simulated to assess their mechanical behavior. Based on the obtained physical and mechanical characteristics, a specific configuration of the Smart-layer was selected and justified for further researches.

scholarly journals Questions of application of fiber-optic sensors for monitoring crack growth during rock deformations

2021 ◽  
Vol 2140 (1) ◽  
pp. 012037
Author(s):  
V V Yugay ◽  
P Sh Madi ◽  
S B Ozhigina ◽  
D A Gorokhov ◽  
A D Alkina
Keyword(s):  
Optical Fiber ◽  
Fiber Optic ◽  
Single Mode ◽  
Mechanical Action ◽  
Fiber Optic Sensors ◽  
Fiber Optic Sensor ◽  
Mountain Range ◽  
Mining Equipment ◽  
Optic Sensor ◽  
Rock Deformations

Abstract The paper considers ways to solve the problem of developing a system for monitoring displacement in quarries, which are the main main cause of the collapse of boards and berms in quarries. To ensure safety and constant monitoring during work at the quarry, there are chiseled fiber-optic sensors. The fiber-optic sensor is made on the basis of a single-mode optical fiber, which makes it possible to measure the displacements of the mountain range at distances of about 30 km with high accuracy. Laboratory sample a fiber-optic sensor in its work uses a method for monitoring additional losses that occur during mechanical action on an optical fiber. The fiber-optic sensor was made to show a fairly high linearity and accuracy during measurements and can be used to control the deformation of the array after appropriate refinement of its design. This article is aimed at creating means of controlling the process of deformation and displacement of a mountain massif. Ultimately, the results of the study will help prevent accidents associated with the collapse of the sides. Since the growth of cracks in the rocks of the bort mountain massif leads to its sudden collapse and creates a significant danger for personnel, it also causes the failure of mining equipment.

Evanescent Wave Absorption Spectroscopy by Means of Bi-Tapered Multimode Optical Fibers

1998 ◽  
Vol 52 (4) ◽  
pp. 546-551 ◽  
Author(s):  
Anna Grazia Mignani ◽  
Riccardo Falciai ◽  
Leonardo Ciaccheri
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
Absorption Spectroscopy ◽  
Evanescent Wave ◽  
Fiber Optic ◽  
Fiber Optic Sensors ◽  
Experimental Results ◽  
Multimode Optical Fiber ◽  
Wave Absorption ◽  
Reproducible Technique

This paper discusses the theoretical and experimental implications of tapering a multimode optical fiber with a view to its use in evanescent wave absorption spectroscopy. Good experimental results are obtained, showing the possibility of quadruplicating the absorbance efficiency. This easy and reproducible technique for taper fabrication is suitable for the implementation of both probes for spectroscopy and chemically assisted fiber-optic sensors.

Sign in / Sign up

Export Citation Format

Share Document