Integrated Fiber Optic Sensors For Nondestructive Characterization Of Concrete Structures

1997 ◽  
Vol 503 ◽  
Author(s):  
F. Ansari
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
Fiber Optic ◽  
Optical Fiber Sensor ◽  
Fiber Optic Sensors ◽  
Fiber Sensors ◽  
Fully Integrated ◽  
Integrated Optical ◽  
Concrete Elements

ABSTRACTIt is possible to monitor the initiation and progress of various mechanical or environmentally induced perturbations in concrete elements by way of fully integrated optical fiber sensors. Geometric adaptability and ease by which optical fibers can be embedded within concrete elements has led to the development of a number of innovative applications for concrete elements. This article is intended for a brief introduction into the theories, principles, and applications of fiber optic sensors as they pertain to applications in concrete.. However, due to the fact that the transduction mechanism in optical fibers is invariant of the materials employed, the principles introduced here also correspond to other structural materials. The only application related differences among various materials pertain to sensitivity and choice of optical fiber sensor types.

Automated Fiber-Optic System for Monitoring the Stability of the Pit Quarry Mass and Dumps

2021 ◽  
pp. 19-26
Author(s):  
А.D. Меkhtiyev ◽  
◽  
E.G. Neshina ◽  
P.Sh. Madi ◽  
D.A. Gorokhov ◽  
...  
Keyword(s):  
Rock Mass ◽  
Optical Fiber ◽  
Optical Fibers ◽  
Fiber Optic ◽  
Light Wave ◽  
Single Mode ◽  
Fiber Optic Sensors ◽  
Fiber Optic Sensor ◽  
Laboratory Sample ◽  
Single Mode Optical Fiber

This article ls with the issues related to the development of a system for monitoring the deformation and displacement of the rock mass leading to the collapse of the quarry sides. Monitoring system uses point-to-point fiber-optic sensors. Fiber-optic sensors and control cables of the communication line are made based on the single mode optical fibers, which allows to measure with high accuracy the deformations and displacements of the rock mass at a distance of 30-50 km. To create fiber-optic pressure sensors, an optical fiber of the ITU-T G. 652.D standard is used. Laboratory sample is developed concerning the point fiber-optic sensor made based on the two-arm Mach-Zender interferometer using a single mode optical fiber for monitoring strain (displacements) with a change in the sensitivity and a reduced influence of temperature interference leading to zero drift. The article presents a mathematical apparatus for calculating the intensity of radiation of a light wave passing through an optical fiber with and without mechanical stress. A laboratory sample of single mode optical fibers based on the Mach-Zender interferometer showed a fairly high linearity and accuracy in the measurement and can be used to control the strain of the mass after appropriate refinement of its design. Mathematical expressions are also given for determining the intensity of the light wave when the distance between the fixing points of a single mode optical fiber changes depending on the change in the external temperature. A diagram for measuring strain using a point fiber-optic strain sensor is developed. Hardware and software package is developed, which can be used to perform a number of settings of measuring channels. The work is aimed at solving the production problems of the Kenzhem quarry of AK Altynalmas JSC.

Evanescent Wave Absorption Spectroscopy by Means of Bi-Tapered Multimode Optical Fibers

1998 ◽  
Vol 52 (4) ◽  
pp. 546-551 ◽  
Author(s):  
Anna Grazia Mignani ◽  
Riccardo Falciai ◽  
Leonardo Ciaccheri
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
Absorption Spectroscopy ◽  
Evanescent Wave ◽  
Fiber Optic ◽  
Fiber Optic Sensors ◽  
Experimental Results ◽  
Multimode Optical Fiber ◽  
Wave Absorption ◽  
Reproducible Technique

This paper discusses the theoretical and experimental implications of tapering a multimode optical fiber with a view to its use in evanescent wave absorption spectroscopy. Good experimental results are obtained, showing the possibility of quadruplicating the absorbance efficiency. This easy and reproducible technique for taper fabrication is suitable for the implementation of both probes for spectroscopy and chemically assisted fiber-optic sensors.

scholarly journals Liquid crystal cell with a tapered optical fiber as an active element to optical applications

2019 ◽  
Vol 11 (1) ◽  
pp. 13
Author(s):  
Joanna Ewa Moś ◽  
Karol Antoni Stasiewicz ◽  
Leszek Roman Jaroszewicz
Keyword(s):  
Liquid Crystal ◽  
Optical Fiber ◽  
Optical Fibers ◽  
Fiber Optic ◽  
High Sensitivity ◽  
Single Mode ◽  
Fiber Optic Sensors ◽  
Liquid Crystal Cell ◽  
Crystal Cell ◽  
Tapered Optical Fiber

The work describes the technology of a liquid crystal cell with a tapered optical fiber as an element providing light. The tapered optical fiber with the total optical loss of 0.22 ± 0.07 dB, the taper waist diameter of 15.5 ± 0.5 μm, and the elongation of 20.4 ± 0.3 mm has been used. The experimental results are presented for a liquid crystal cell filled with a mixture 1550* for parallel orientation of LC molecules to the cross section of the taper waist. Measurement results show the influence of the electrical field with voltage in the range of 0-200 V, without, as well as with different modulation for spectral characteristics. The sinusoidal and square signal shapes are used with a 1-10 Hz frequency range. Full Text: PDF ReferencesZ. Liu, H. Y. Tam, L. Htein, M. L.Vincent Tse, C. Lu, "Microstructured Optical Fiber Sensors", J. Lightwave Technol. 35, 16 (2017). CrossRef T. R. Wolinski, K. Szaniawska, S. Ertman1, P. Lesiak, A. W. Domański, R. Dabrowski, E. Nowinowski-Kruszelnicki, J. Wojcik "Influence of temperature and electrical fields on propagation properties of photonic liquid-crystal fibres", Meas. Sci. Technol. 17, 5 (2006). CrossRef K. Nielsen, D. Noordegraaf, T. Sørensen, A. Bjarklev,T. Hansen, "Selective filling of photonic crystal fibres", J. Opt. A: Pure Appl. Opt. 7, 8 (2005). CrossRef A. A. Rifat, G. A. Mahdiraji, D. M. Chow, Y, Gang Shee, R. Ahmed, F. Rafiq, M Adikan, "Photonic Crystal Fiber-Based Surface Plasmon Resonance Sensor with Selective Analyte Channels and Graphene-Silver Deposited Core", Sensors 15, 5 (2015) CrossRef Y. Huang, Z.Tian, L.P. Sun, D. Sun, J.Li, Y.Ran, B.-O. Guan "High-sensitivity DNA biosensor based on optical fiber taper interferometer coated with conjugated polymer tentacle", Opt. Express 23, 21 (2015). CrossRef X. Wang, O. S. Wolfbeis, "The 2016 Annual Review Issue", Anal. Chem., 88, 1 (2016). CrossRef Ye Tian, W. Wang, N. Wu, X. Zou, X.Wang, "Tapered Optical Fiber Sensor for Label-Free Detection of Biomolecules", Sensors 11, 4 (2011). CrossRef O. Katsunari, Fundamentals of Optical Waveguides, (London, Academic Press, (2006). DirectLink A. K. Sharma, J. Rajan, B.D. Gupta, "Fiber-Optic Sensors Based on Surface Plasmon Resonance: A Comprehensive Review", IEEE Sensors Journal 7, 8 (2007). CrossRef C. Caucheteur, T. Guo, J. Albert, "Review of plasmonic fiber optic biochemical sensors: improving the limit of detection", Anal. Bioanal.Chem. 407, 14 (2015). CrossRef S. F. Silva L. Coelho, O. Frazão, J. L. Santos, F. X.r Malcata, "A Review of Palladium-Based Fiber-Optic Sensors for Molecular Hydrogen Detection", IEEE SENSORS JOURNAL 12, 1 (2012). CrossRef H. Waechter, J. Litman, A. H. Cheung, J. A. Barnes, H.P. Loock, "Chemical Sensing Using Fiber Cavity Ring-Down Spectroscopy", Sensors 10, 3 (2010). CrossRef S. Zhu, F. Pang, S. Huang, F.Zou, Y.Dong, T.Wang, "High sensitivity refractive index sensor based on adiabatic tapered optical fiber deposited with nanofilm by ALD", Opt. Express 23, 11 (2015). CrossRef L. Zhang, J. Lou, L. Tong, "Micro/nanofiber optical sensors", Photonics sensor 1, 1 (2011). CrossRef L.Tong, J. Lou, E. Mazur, "Single-mode guiding properties of subwavelength-diameter silica and silicon wire waveguides", Opt. Express 11, 6 (2004). CrossRef H. Moyyed, I. T. Leite, L. Coelho, J. L. Santos, D. Viegas, "Analysis of phase interrogated SPR fiber optic sensors with bimetallic layers", IEEE Sensors Journal 14, 10 (2014). CrossRef A. González-Cano, M. Cruz Navarette, Ó. Esteban, N. Diaz Herrera , "Plasmonic sensors based on doubly-deposited tapered optical fibers", Sensors 14, 3 (2014). CrossRef K. A. Stasiewicz, J.E. Moś, "Threshold temperature optical fibre sensors", Opt. Fiber Technol. 32, (2016). CrossRef L. Zhang, F. Gu, J. Lou, X. Yin, L. Tong, "Fast detection of humidity with a subwavelength-diameter fiber taper coated with gelatin film", Opt. Express 16, 17 (2008). CrossRef S.Zhu, F.Pang, S. Huang, F. Zou, Q. Guo, J. Wen, T. Wang, "High Sensitivity Refractometer Based on TiO2-Coated Adiabatic Tapered Optical Fiber via ALD Technology", Sensors 16, 8 (2016). CrossRef G.Brambilla, "Optical fibre nanowires and microwires: a review", J. Optics 12, 4 (2010) CrossRef M. Ahmad, L.L. Hench, "Effect of taper geometries and launch angle on evanescent wave penetration depth in optical fibers", Biosens. Bioelectron. 20, 7 (2005). CrossRef L.M. Blinov, Electrooptic Effects in Liquid Crystal Materials (New York, Springftianer, 1994). CrossRef L. Scolari, T.T. Alkeskjold, A. Bjarklev, "Tunable Gaussian filter based on tapered liquid crystal photonic bandgap fibre", Electron. Lett. 42, 22 (2006). CrossRef J. Moś, M. Florek, K. Garbat, K.A. Stasiewicz, N. Bennis, L.R. Jaroszewicz, "In-Line Tunable Nematic Liquid Crystal Fiber Optic Device", J. of Lightwave Technol. 36, 4 (2017). CrossRef J. Moś, K A Stasiewicz, K Garbat, P Morawiak, W Piecek, L R Jaroszewicz, "Tapered fiber liquid crystal hybrid broad band device", Phys. Scripta. 93, 12 (2018). CrossRef Ch. Veilleux, J. Lapierre, J. Bures, "Liquid-crystal-clad tapered fibers", Opt. Lett. 11, 11 (1986). CrossRef R. Dąbrowski, K. Garbat, S. Urban, T.R. Woliński, J. Dziaduszek, T. Ogrodnik, A,Siarkowska, "Low-birefringence liquid crystal mixtures for photonic liquid crystal fibres application", Liq. Cryst. 44, (2017). CrossRef S. Lacroix, R. J. Black, Ch. Veilleux, J. Lapierre, "Tapered single-mode fibers: external refractive-index dependence", Appl. Opt., 25, 15 (1986). CrossRef J.F. Henninot, D. Louvergneaux , N.Tabiryan, M. Warenghem, "Controlled Leakage of a Tapered Optical Fiber with Liquid Crystal Cladding", Mol. Cryst.and Liq.Cryst., 282, 1(1996). CrossRef

Steel Structure Damage Detection Based on BOTDR Based Distributed Fiber Optic Sensors

2012 ◽  
Vol 424-425 ◽  
pp. 1274-1277 ◽  
Author(s):  
Guo An Wang ◽  
Hao Zhang
Keyword(s):  
Optical Fiber ◽  
Fiber Optic ◽  
Steel Structure ◽  
Optical Fiber Sensors ◽  
Fiber Optic Sensors ◽  
Time Domain Reflectometry ◽  
Experimental Investigations ◽  
Localized Deformation ◽  
Fiber Sensors ◽  
Structure Damage

For Brillouin Optical Time Domain Reflectometry (BOTDR) based distributed sensing technique, limited by 1m-order spatial resolution, it is difficult to monitor or test localized deformation, and loop installation of optical fiber sensors is a good countermeasure, In this paper, firstly, the measurement behavior and performance of loop installed optical fiber sensors is investigated experimentally, and the accuracy of BOTDR based distributed fiber optic sensors (DFOS) is evaluated. Furthermore, an experimental investigations on a steel specimen is carried out. Based on the investigations, steel structure damage identification method with no requirement for a structural Numerical Model is proposed.

Optical Fiber Loop Sensors for Structural Health Monitoring of Composites

2008 ◽  
Vol 1129 ◽  
Author(s):  
Nguyen Q Nguyen ◽  
Nikhil Gupta
Keyword(s):  
Structural Health Monitoring ◽  
Optical Fiber ◽  
Optical Fibers ◽  
Health Monitoring ◽  
Fiber Optic ◽  
Optical Power ◽  
Single Mode ◽  
Radius Of Curvature ◽  
Fiber Sensors ◽  
Structural Health

AbstractIn the present work a fiber-optic loop-sensor is designed and tested for possible applications in structural health monitoring of composite materials. It is known that bending an optical fiber beyond a critical curvature leads to loss of optical power through the curved region. The optical power loss depends on the radius of curvature of the loop. The optical power can be measured by a photodetector and a change in the power due a change to the curvature can be measured. In the present research optical fiber-optic loop-sensors are developed that can exploit this concept. Single-mode optical fiber sensors having different loop radii, from 6-10 mm, are fabricated and calibrated for applied strain on the loop. The calibration is carried out using a 0.098 N load cell and a computer controlled translation stage having 50 nm step resolution. Results show that the sensors provide highly repeatable curves for loading and unloading cycles. Smaller loop radii lead to higher optical power losses, resulting in higher sensitivity. Calibration results show that such sensors can be used in structural health monitoring applications. In this approach the coating and cladding of optical fibers are maintained intact; therefore, the sensors are robust and can withstand several composites fabrication processes.

scholarly journals Characterization of Hand Gestures by a Smartphone-Based Optical Fiber Force Myography Sensor

2020 ◽  
Vol 2 (1) ◽  
pp. 46
Author(s):  
Matheus S. Rodrigues ◽  
Pedro M. Lazari ◽  
Marco C. P. Soares ◽  
Eric Fujiwara
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
Low Cost ◽  
Optical Fiber Sensor ◽  
Hand Gestures ◽  
Optical Signals ◽  
Integrated Optical ◽  
Reliable Performance ◽  
Force Myography ◽  
Polymer Optical Fibers

In this paper, a smartphone-integrated, optical fiber sensor based on the force myography technique (FMG), which characterizes the stimuli of the forearm muscles in terms of mechanical pressures, was proposed for the identification of hand gestures. The device’s flashlight excites a pair of polymer optical fibers and the output signals are detected by the camera. The light intensity is modulated through wearable, force-driven microbending transducers placed in the forearm and the acquired optical signals are processed by an algorithm based on decision trees and residual error. The sensor provided a hit rate of 87% regarding four postures, yielding reliable performance with a simple, portable, and low-cost setup embedded on a smartphone.

Fiber-Optic Sensor Technology and Combinatorial Chemistry

2003 ◽  
Vol 804 ◽  
Author(s):  
Peter Geissinger ◽  
Barry J. Prince ◽  
Nadejda T. Kaltcheva ◽  
Maureen J. Prince ◽  
Alan W. Schwabacher
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
Combinatorial Chemistry ◽  
Fiber Optic ◽  
Optical Fiber Sensor ◽  
Combinatorial Libraries ◽  
Fiber Optic Sensor ◽  
Fiber Sensor ◽  
Sensor Technology ◽  
Compound Libraries

ABSTRACTOur recently introduced “Fiber-Optic Combinatorial Chemistry” technique combines combinatorial synthetic methods and optical fiber sensor technologies. Our one-dimensional combinatorial chemistry method allows for synthesis of large compound libraries in a linear format, for example in the cladding of optical fibers. Subjecting these libraries to assays that indicate positive identification of a library member by the binding of a fluorescent group, produces, in effect, an optical fiber sensor array. The location of a particular fluorescent region along the optical fiber can be determined through the optical time-of-flight technique, in which laser pulses propagating through the fiber core probe through their evanescent fields the fluorescent properties of the compounds located in the fiber cladding. It is a virtue of our combinatorial synthetic procedure that with the location of a compound on the fiber, its synthetic history is immediately known. We demonstrated that limitations on the spatial resolution of compounds along the fiber due to the excited state lifetimes of the fluorescent marker molecules can be overcome by the use of a second fiber - evanescently coupled to the first one - as an optical delay.The existing claddings of optical fibers severely restrict the range of chemistries for the synthesis of combinatorial libraries. Therefore, in order to make our method more generally applicable, the existing fiber cladding has to be replaced by a porous material that can act as solid support for reactions and at the same time preserve the optical guiding conditions of the fiber. In this contribution we discuss the requirements for such a replacement cladding and evaluate the general suitability of a functionalized candidate material.

scholarly journals Trends in the Implementation of Advanced Plasmonic Materials in Optical Fiber Sensors (2010–2020)

Chemosensors ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 64
Author(s):  
María Elena Martínez-Hernández ◽  
Pedro J. Rivero ◽  
Javier Goicoechea ◽  
Francisco J. Arregui
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
High Performance ◽  
Optical Fiber Sensor ◽  
Cost Effective ◽  
Optical Fiber Sensors ◽  
Fiber Sensors ◽  
Plasmonic Materials ◽  
Sensing Applications ◽  
Fiber Technology

In recent years, the interaction between light and metallic films have been proven to be a highly powerful tool for optical sensing applications. We have witnessed the development of highly sensitive commercial devices based on Surface Plasmon Resonances. There has been continuous effort to integrate this plasmonic sensing technology using micro and nanofabrication techniques with the optical fiber sensor world, trying to get better, smaller and cost-effective high performance sensing solutions. In this work, we present a review of the latest and more relevant scientific contributions to the optical fiber sensors field using plasmonic materials over the last decade. The combination of optical fiber technology with metallic micro and nanostructures that allow plasmonic interactions have opened a complete new and promising field of study. We review the main advances in the integration of such metallic micro/nanostructures onto the optical fibers, discuss the most promising fabrication techniques and show the new trends in physical, chemical and biological sensing applications.

Fiber optic sensors for characterization of composite structural materials and structural monitoring

1997 ◽  
Author(s):  
Robert P. Kenny ◽  
E. Gutierrez ◽  
Alfredo C. Lucia ◽  
Maurice P. Whelan ◽  
F. Gaiazzi
Keyword(s):  
Fiber Optic ◽  
Structural Materials ◽  
Fiber Optic Sensors ◽  
Structural Monitoring
Sign in / Sign up

Export Citation Format

Share Document