New SIMS method to characterize hydrogen in polysilicon films

2022 ◽  
Vol 40 (1) ◽  
pp. 014003
Author(s):  
Xue-feng Lin ◽  
Agi Fucsko ◽  
Kari Noehring ◽  
Elaine Gabriel ◽  
Adam Regner ◽  
...  
Keyword(s):  
Polysilicon Films

TEM characterization of Au/Polysilicon interactions

1990 ◽  
Vol 48 (4) ◽  
pp. 650-651
Author(s):  
N. David Theodore ◽  
Leslie H. Allen ◽  
C. Barry Carter ◽  
James W. Mayer
Keyword(s):  
Solid Phase ◽  
Single Crystal Silicon ◽  
Chemical Vapor ◽  
Electrical Contacts ◽  
Silicon Substrates ◽  
Crystal Silicon ◽  
Transmission Electron ◽  
Polysilicon Films ◽  
The Stability

Metal/polysilicon investigations contribute to an understanding of issues relevant to the stability of electrical contacts in semiconductor devices. These investigations also contribute to an understanding of Si lateral solid-phase epitactic growth. Metals such as Au, Al and Ag form eutectics with Si. reactions in these metal/polysilicon systems lead to the formation of large-grain silicon. Of these systems, the Al/polysilicon system has been most extensively studied. In this study, the behavior upon thermal annealing of Au/polysilicon bilayers is investigated using cross-section transmission electron microscopy (XTEM). The unique feature of this system is that silicon grain-growth occurs at particularly low temperatures ∽300°C).Gold/polysilicon bilayers were fabricated on thermally oxidized single-crystal silicon substrates. Lowpressure chemical vapor deposition (LPCVD) at 620°C was used to obtain 100 to 400 nm polysilicon films. The surface of the polysilicon was cleaned with a buffered hydrofluoric acid solution. Gold was then thermally evaporated onto the samples.

Applications of CoSi2 to VLSI and ULSI

1993 ◽  
Vol 320 ◽  
Author(s):  
S. P. Murarka
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Integrated Circuits ◽  
Lattice Mismatch ◽  
Electrical Contacts ◽  
High Conductivity ◽  
Low Resistivity ◽  
Polysilicon Films ◽  
Continued Use

ABSTRACTSilicides have found application as high conductivity, high temperature, and corrosion resistance materials that form good electrical contacts to silicon and good low resistivity cladding on polysilicon films used as gate metal. Of various silicides investigated in past CoSi2 offers several advantages including lowest resistivity, self-aligned formation, low lattice mismatch with silicon, stability in presence of dopants and on SiO2, Si3N4, or Sioxynitrides, and reliability to process temperatures ≤900°C even when used in thicknesses as thin as 50-60 nm. Thus, CoSi2 has found an application in VLSI and ULSI. In this paper, the properties, formation and processing, reliability, and applicability of CoSi2 will be reviewed. It will be shown that CoSi2 is only silicide that offers properties and reliability for continued use in sub-0.25 pm VLSI and ULSI integrated circuits.

Fem Simulation of Micro-Rotating-Structures and Their Applications in Measurement of Residual Stresses in Thin Films

1997 ◽  
Vol 505 ◽  
Author(s):  
Xin Zhang ◽  
Tong-Yi Zhang ◽  
Yitshak Zohar
Keyword(s):  
Thin Films ◽  
Residual Stresses ◽  
Fem Simulation ◽  
Sensitivity Factor ◽  
Local Measurement ◽  
Micro Structure ◽  
Micro Raman Spectroscopy ◽  
Before And After ◽  
Polysilicon Films ◽  
Simulation Results

ABSTRACTFEM simulation of micro-rotating-structures was performed for local measurement of residual stresses in thin films. A sensitivity factor is introduced, studied and tabulated from the simulation results. The residual stress can be evaluated from the rotating deflection, the lengths of rotating and fixed beams, and the sensitivity factor. The micro-structure technique was applied to measure residual stresses in both silicon nitride and polysilicon thin films, before and after rapid thermal annealing (RTA), and further confirmed by wafer curvature method. Residual stresses in polysilicon films at different RTA stages were also characterized by micro-Raman spectroscopy (MRS). The experimental results indicate that micro-rotating-structures indeed have the ability to measure spatially and locally residual stresses in MEMS thin films with appropriate sensitivities.

An advanced MOS-IC process technology using local oxidation ot oxygen-doped polysilicon films

1978 ◽  
Vol 13 (4) ◽  
pp. 472-478 ◽  
Author(s):  
T. Yamaguchi ◽  
K.L. Seaward ◽  
J.L. Sachitano ◽  
S. Sato ◽  
D. Ritchie
Keyword(s):  
Process Technology ◽  
Local Oxidation ◽  
Polysilicon Films

The Effect of Temperature and Pressure on Residual Stress in LPCVD Polysilicon Films

1992 ◽  
Vol 276 ◽  
Author(s):  
D-G. Oei ◽  
S. L. McCarthy
Keyword(s):  
Residual Stress ◽  
Deposition Temperature ◽  
Polycrystalline Silicon ◽  
Chemical Vapor ◽  
Effect Of Temperature ◽  
Pressure Chemical ◽  
Polysilicon Films ◽  
Oriented Polycrystalline ◽  
Temperature And Pressure ◽  
Reduced Pressures

ABSTRACTMeasurements of the residual stress in polysilicon films made by Low Pressure Chemical Vapor Deposition (LPCVD) at different deposition pressures and temperatures are reported. The stress behavior of phosphorus (P)-ion implanted/annealed polysilicon films is also reported. Within the temperature range of deposition, 580 °C to 650 °C, the stress vs deposition temperature plot exhibits a transition region in which the stress of the film changes from highly compressive to highly tensile and back to highly compressive as the deposition temperature increases. This behavior was observed in films that were made by the LPCVD process at reduced pressures of 210 and 320 mTORR. At deposition temperatures below 590 °C the deposit is predominantly amorphous, and the film is highly compressive; at temperatures above 610 °C (110) oriented polycrystalline silicon is formed exhibiting high compressive residual stress.

A Comparison of Mos Devices with In-Situ Boron Doped Polysilicon and Poly Sige Gates Deposited in an Rtcvd System Using S12H6 and B2H6 Gas Mixture

1998 ◽  
Vol 525 ◽  
Author(s):  
M. R. Mirabedini ◽  
V. Z-Q Li ◽  
A. R. Acker ◽  
R. T. Kuehn ◽  
D. Venables ◽  
...  
Keyword(s):  
Flat Band ◽  
Gas Mixture ◽  
Mos Capacitors ◽  
Mos Devices ◽  
Boron Doped ◽  
Depletion Effect ◽  
Polysilicon Films ◽  
Sims Analysis ◽  
Boron Penetration

ABSTRACTIn this work, in-situ doped polysilicon and poly-SiGe films have been used as the gate material for the fabrication of MOS devices to evaluate their respective performances. These films were deposited in an RTCVD system using a Si2H6 and GeH4 gas mixture. MOS capacitors with 45 Å thick gate oxides and polysilicon/poly-SiGe gates were subjected to different anneals to study boron penetration. SIMS analysis and flat band voltage measurements showed much lower boron penetration for devices with poly-SiGe gates than for devices with polysilicon gates. In addition, C-V measurements showed no poly depletion effects for poly-SiGe gates while polysilicon gates had a depletion effect of about 8%. A comparison of resistivities of these films showed a low resistivity of 1 mΩ-cm for poly-SiGe films versus 3 mΩ-cm for polysilicon films after an anneal at 950 °C for 30 seconds.

Comparison of Structural and Electrical Characteristics of Solid-Phase Epitaxial Films Recrystallized By Rapid Thermal Annealing and Furnace Annealing

1985 ◽  
Vol 53 ◽  
Author(s):  
R. Sundaresan ◽  
P.-H. Chang ◽  
S.D.S. Malhi ◽  
H.W. Lam
Keyword(s):  
Solid Phase ◽  
Epitaxial Films ◽  
Electrical Characteristics ◽  
Lateral Extension ◽  
Rapid Thermal Anneal ◽  
Furnace Annealing ◽  
Layer 4 ◽  
Polysilicon Films ◽  
Average Electron ◽  
Temperature Furnace

ABSTRACTSolid-phase epitaxial regrowth of polysilicon films. amorphized by a room-temperature silicon implant. has been achieved using a (low temperature) furnace anneal or a (high temperature) rapid thermal anneal. Lateral extension of the growth onto an oxide layer, 4 μm wide, has also been observed. The electrical properties of the films were examined by building MO2S devices in them. Average electron mobilities of 520 cm2/v-sec and 200 cm2/v-sec have been measured for films regrown on top of silicon and oxide respectively.

Sign in / Sign up

Export Citation Format

Share Document