Optimization of experimental operating parameters for very high resolution focused ion beam applications

1997 ◽  
Vol 15 (6) ◽  
pp. 2373 ◽  
Author(s):  
J. Gierak
Keyword(s):  
High Resolution ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Operating Parameters ◽  
Very High

FIB Enhancement of Mechanically Polished Cross-sections

2019 ◽  
Author(s):  
Becky Holdford
Keyword(s):  
Electron Microscope ◽  
High Resolution ◽  
Scanning Electron Microscope ◽  
Cross Sections ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
High Resolution Imaging ◽  
Chemical Attack ◽  
Resolution Imaging ◽  
Scanning Electron

Abstract On mechanically polished cross-sections, getting a surface adequate for high-resolution imaging is sometimes beyond the analyst’s ability, due to material smearing, chipping, polishing media chemical attack, etc.. A method has been developed to enable the focused ion beam (FIB) to re-face the section block and achieve a surface that can be imaged at high resolution in the scanning electron microscope (SEM).

The Novel Dopant Profile Inspection Methodology by FIB

2010 ◽  
Author(s):  
Po Fu Chou ◽  
Li Ming Lu
Keyword(s):  
High Resolution ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Real Sample ◽  
Physical Analysis ◽  
The Novel ◽  
High Contrast ◽  
Dopant Profile ◽  
P Type

Abstract Dopant profile inspection is one of the focused ion beam (FIB) physical analysis applications. This paper presents a technique for characterizing P-V dopant regions in silicon by using a FIB methodology. This technique builds on published work for backside FIB navigation, in which n-well contrast is observed. The paper demonstrates that the technique can distinguish both n- and p-type dopant regions. The capability for imaging real sample dopant regions on current fabricated devices is also demonstrated. SEM DC and FIB DC are complementary methodologies for the inspection of dopants. The advantage of the SEM DC method is high resolution and the advantage of FIB DC methodology is high contrast, especially evident in a deep N-well region.

scholarly journals High resolution magnetic force microscopy using focused ion beam modified tips

2002 ◽  
Vol 81 (5) ◽  
pp. 865-867 ◽  
Author(s):  
G. N. Phillips ◽  
M. Siekman ◽  
L. Abelmann ◽  
J. C. Lodder
Keyword(s):  
High Resolution ◽  
Magnetic Force Microscopy ◽  
Magnetic Force ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Force Microscopy

Point Defect Clusters and Dislocations in FIB Irradiated Nanocrystalline Aluminum Films: An Electron Tomography and Aberration-Corrected High-Resolution ADF-STEM Study

2011 ◽  
Vol 17 (6) ◽  
pp. 983-990 ◽  
Author(s):  
Hosni Idrissi ◽  
Stuart Turner ◽  
Masatoshi Mitsuhara ◽  
Binjie Wang ◽  
Satoshi Hata ◽  
...  
Keyword(s):  
High Resolution ◽  
Point Defect ◽  
Focused Ion Beam ◽  
Electron Tomography ◽  
Ion Beam ◽  
Dark Field ◽  
Internal Stresses ◽  
Defect Clusters ◽  
Point Defect Clusters ◽  
Aberration Corrected

AbstractFocused ion beam (FIB) induced damage in nanocrystalline Al thin films has been characterized using advanced transmission electron microscopy techniques. Electron tomography was used to analyze the three-dimensional distribution of point defect clusters induced by FIB milling, as well as their interaction with preexisting dislocations generated by internal stresses in the Al films. The atomic structure of interstitial Frank loops induced by irradiation, as well as the core structure of Frank dislocations, has been resolved with aberration-corrected high-resolution annular dark-field scanning TEM. The combination of both techniques constitutes a powerful tool for the study of the intrinsic structural properties of point defect clusters as well as the interaction of these defects with preexisting or deformation dislocations in irradiated bulk or nanostructured materials.

Fabrication of Sub-250nm High Aspect Ratio Apertures by Focused Ion Beam Lithography

2006 ◽  
Vol 983 ◽  
Author(s):  
Todd Simpson ◽  
Ian V Mitchell
Keyword(s):  
Silicon Nitride ◽  
High Resolution ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Gold Films ◽  
Ion Beam Lithography ◽  
Diameter Hole ◽  
Sem Imaging ◽  
Aperture Arrays

AbstractAperture arrays were fabricated in 1.0µm thick gold films supported on 20nm thick silicon nitride membranes. Lithographic milling strategies in gold were evaluated through the use of in-situ sectioning and high resolution SEM imaging with the UWO CrossBeam FIB/SEM. A successful strategy for producing a 250nm diameter hole with sidewalls approaching vertical is summarized.

Multiple Double Cross-Section Transmission Electron Microscope Sample Preparation of Specific Sub-10 nm Diameter Si Nanowire Devices

2011 ◽  
Vol 17 (6) ◽  
pp. 889-895 ◽  
Author(s):  
Lynne M. Gignac ◽  
Surbhi Mittal ◽  
Sarunya Bangsaruntip ◽  
Guy M. Cohen ◽  
Jeffrey W. Sleight
Keyword(s):  
Electron Microscope ◽  
High Resolution ◽  
Cross Section ◽  
Transmission Electron Microscope ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Si Nanowire ◽  
Dual Beam ◽  
Transmission Electron ◽  
High Resolution Tem

AbstractThe ability to prepare multiple cross-section transmission electron microscope (XTEM) samples from one XTEM sample of specific sub-10 nm features was demonstrated. Sub-10 nm diameter Si nanowire (NW) devices were initially cross-sectioned using a dual-beam focused ion beam system in a direction running parallel to the device channel. From this XTEM sample, both low- and high-resolution transmission electron microscope (TEM) images were obtained from six separate, specific site Si NW devices. The XTEM sample was then re-sectioned in four separate locations in a direction perpendicular to the device channel: 90° from the original XTEM sample direction. Three of the four XTEM samples were successfully sectioned in the gate region of the device. From these three samples, low- and high-resolution TEM images of the Si NW were taken and measurements of the NW diameters were obtained. This technique demonstrated the ability to obtain high-resolution TEM images in directions 90° from one another of multiple, specific sub-10 nm features that were spaced 1.1 μm apart.

Localized High-Resolution Stress Measurements on MEMS Structures

2009 ◽  
Author(s):  
Dietmar Vogel ◽  
Astrid Gollhardt ◽  
Bernd Michel
Keyword(s):  
Raman Spectroscopy ◽  
High Resolution ◽  
Spatial Resolution ◽  
Focused Ion Beam ◽  
Stress Measurement ◽  
Ion Beam ◽  
Stress Relief ◽  
Stokes Line ◽  
Stress Measurements ◽  
Electron Backscattering

Three different methods of stress measurement with strong spatial resolution are presented. They base on stress relief techniques caused by focused ion beam milling, on altered electron backscattering by deformed lattices and on Stokes line shift measurements by Raman spectroscopy. The capability of these methods is demonstrated by their application to typical MEMS structures. A comparison between the methods is performed in order to outline potentials and limitations.

Sign in / Sign up

Export Citation Format

Share Document