Dual beam atomic absorption spectroscopy for controlling thin film deposition rates

1994 ◽  
Vol 12 (2) ◽  
pp. 1217 ◽  
Author(s):  
S. J Benerofe
Keyword(s):  
Thin Film ◽  
Atomic Absorption ◽  
Absorption Spectroscopy ◽  
Atomic Absorption Spectroscopy ◽  
Thin Film Deposition ◽  
Film Deposition ◽  
Deposition Rates ◽  
Dual Beam

FTIR absorption spectroscopy as a novel method for thin film deposition rate measurement

2013 ◽  
Vol 114 (4) ◽  
pp. 1295-1301
Author(s):  
Thomas Reichenbacher ◽  
Simon Schuetz ◽  
Ilja Stasewitsch ◽  
Stephan Fabig
Keyword(s):  
Thin Film ◽  
Deposition Rate ◽  
Absorption Spectroscopy ◽  
Thin Film Deposition ◽  
Film Deposition ◽  
Rate Measurement ◽  
Film Deposition Rate ◽  
Novel Method

Observations on the growth of YBa2Cu3O7-δ thin films on MgO by pulsed-laser ablation

1991 ◽  
Vol 49 ◽  
pp. 1068-1069
Author(s):  
M. Grant Norton ◽  
C. Barry Carter
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Laser Ablation ◽  
Substrate Surface ◽  
Pulsed Laser ◽  
Pulsed Laser Ablation ◽  
Thin Film Deposition ◽  
Film Deposition ◽  
Laser Ablation Process ◽  
Deposition Parameters

Pulsed-laser ablation has been widely used to produce high-quality thin films of YBa2Cu3O7-δ on a range of substrate materials. The nonequilibrium nature of the process allows congruent deposition of oxides with complex stoichiometrics. In the high power density regime produced by the UV excimer lasers the ablated species includes a mixture of neutral atoms, molecules and ions. All these species play an important role in thin-film deposition. However, changes in the deposition parameters have been shown to affect the microstructure of thin YBa2Cu3O7-δ films. The formation of metastable configurations is possible because at the low substrate temperatures used, only shortrange rearrangement on the substrate surface can occur. The parameters associated directly with the laser ablation process, those determining the nature of the process, e g. thermal or nonthermal volatilization, have been classified as ‘primary parameters'. Other parameters may also affect the microstructure of the thin film. In this paper, the effects of these ‘secondary parameters' on the microstructure of YBa2Cu3O7-δ films will be discussed. Examples of 'secondary parameters' include the substrate temperature and the oxygen partial pressure during deposition.

Characterization of Y-Ba-Cu-O films grown on silicon substrates by sequential evaporation

1988 ◽  
Vol 46 ◽  
pp. 866-867
Author(s):  
E. L. Hall ◽  
A. Mogro-Campero ◽  
L. G. Turner ◽  
N. Lewis
Keyword(s):  
Thin Film ◽  
Thin Film Deposition ◽  
Superconducting Films ◽  
Electron Beam Evaporation ◽  
Film Deposition ◽  
Silicon Substrates ◽  
Superconducting Properties ◽  
Sequential Electron ◽  
Thin Superconducting Films

There is great interest in the growth of thin superconducting films of YBa2Cu3Ox on silicon, since this is a necessary first step in the use of this superconductor in a variety of possible electronic applications including interconnects and hybrid semiconductor/superconductor devices. However, initial experiments in this area showed that drastic interdiffusion of Si into the superconductor occurred during annealing if the Y-Ba-Cu-O was deposited direcdy on Si or SiO2, and this interdiffusion destroyed the superconducting properties. This paper describes the results of the use of a zirconia buffer layer as a diffusion barrier in the growth of thin YBa2Cu3Ox films on Si. A more complete description of the growth and characterization of these films will be published elsewhere.Thin film deposition was carried out by sequential electron beam evaporation in vacuum onto clean or oxidized single crystal Si wafers. The first layer evaporated was 0.4 μm of zirconia.

CVD copper thin film deposition using (α-methylstyrene)Cu(I)(hfac)

2001 ◽  
Vol 11 (PR3) ◽  
pp. Pr3-553-Pr3-560 ◽  
Author(s):  
W. Zhuang ◽  
L. J. Charneski ◽  
D. R. Evans ◽  
S. T. Hsu ◽  
Z. Tang ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Film Deposition ◽  
Film Deposition ◽  
Copper Thin Film

DETERMINATION OF ARSENIC, CADMIUM, LEAD, COOPER AND ZINC IN DRINKING WATER FROM R. MACEDONIA

2018 ◽  
Vol 28 (4) ◽  
pp. 1259-1264
Author(s):  
Kiril Lisichkov ◽  
Katerina Atkovska ◽  
Neven Trajchevski ◽  
Orce Popovski ◽  
Nadica Todorovska
Keyword(s):  
Drinking Water ◽  
Water Supply ◽  
Atomic Absorption ◽  
Absorption Spectroscopy ◽  
Atomic Absorption Spectroscopy ◽  
Supply System ◽  
Water Supply System ◽  
Bottled Water ◽  
Cadmium Lead ◽  
The City

The presence of some chemical compounds at higher levels than maximum permissible concentrations (MPC) in the drinking water, suggests of water resources pollution. In this paper the following elements were analyzed: total arsenic, cadmium, lead, cooper and zinc. Twelve samples of water from the water supply system from the city of Skopje were examined during one year from three different springs. Also, ten samples of bottled water from three producers from the Macedonian market were tested.The determined average mass concentrations of total As, Cd(II), Pb(II), Cu(II) and Zn(II) in the analyzed water samples from the water supply system are 1.35 μg/l, 0.06 μg/l, 0.6 μg/l, 0.9 μg/l and 1,12 μg/l, respectively, and for the tested bottled water, the mean values ranges from 0.56 - 0.83 μg total As / l, 0.053 - 0.056 μg Cd(II)/l, 0.51 - 0.54 μg Pb(II)/l , 0.6 - 0.87 μg Cu(II)/l and 0.68 - 0.8 μg Zn(II)/l water.The following instrumental analytical methods and techniques were used for the analysis of the tested samples of drinking water: flame atomic absorption spectroscopy (AAS), atomic absorption spectroscopy with hydride cеll, electrothermal atomic absorption spectroscopy.The obtained results are shown in tables and graphic form. According to the obtained results a comparative analysis was carried out indicate that it is a water of good quality that can be used in different branches of the process industry.The obtained results in this paper do not exceed the values of the MPC of the Republic of Macedonia prescribed by the legal regulations for the drinking water, which confirm the health safety of the drinking water from the water supply system in the city of Skopje and the packed waters from the Macedonian market in relation to the tested elements.

Sign in / Sign up

Export Citation Format

Share Document