Advance static random access memory soft fail analysis using nanoprobing and junction delineation transmission electron microscopy

2007 ◽  
Vol 25 (1) ◽  
pp. 202 ◽  
Author(s):  
Wen-Tung Chang ◽  
Tsung-Eong Hsieh ◽  
Gunnar Zimmermann ◽  
Lars Wang
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Random Access ◽  
Random Access Memory ◽  
Static Random Access Memory ◽  
Access Memory ◽  
Transmission Electron

Analysis of FSRAM Single Bit Failures Due to Unique Dislocations

1998 ◽  
Author(s):  
Phil Schani ◽  
S. Subramanian ◽  
Vince Soorholtz ◽  
Pat Liston ◽  
Jamey Moss ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Random Access ◽  
Random Access Memory ◽  
Static Random Access Memory ◽  
Temperature Sensitive ◽  
Wafer Level ◽  
Top Down ◽  
Access Memory ◽  
Transmission Electron ◽  
Contact Processing

Abstract Temperature sensitive single bit failures at wafer level testing on 0.4µm Fast Static Random Access Memory (FSRAM) devices are analyzed. Top down deprocessing and planar Transmission Electron Microscopy (TEM) analyses show a unique dislocation in the substrate to be the cause of these failures. The dislocation always occurs at the exact same location within the bitcell layout with respect to the single bit failing data state. The dislocation is believed to be associated with buried contact processing used in this type of bitcell layout.

Evidence of Ti-related Inclusions in an Al Alloy Interconnecting Layer for Nanometer 256MBit DRAM Semiconductor Devices Characterized by TEM, STEM, EELS Elemental Mapping, and XEDS Linescan

2002 ◽  
Vol 737 ◽  
Author(s):  
Wei Zhao ◽  
Steve Graca
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Semiconductor Devices ◽  
Random Access ◽  
Random Access Memory ◽  
Dynamic Random Access Memory ◽  
Elemental Mapping ◽  
Access Memory ◽  
Analytical Tem ◽  
Transmission Electron

ABSTRACTWith the introduction of high aspect ratio and steep geometries in deep-subquarter-micron dynamic random access memory (DRAM) device, it becomes more and more critical to understand the formation of undesired intermetallic Ti-Al phases in Al-metallization and thus better-control the profile of interconnectors. In this article, Ti-related inclusions in Metal 1 (M1) interconnecting layer (an AlCu-0.5% alloy) originated from the bottom Ti liner were characterized with an Analytical TEM. Samples were cleaved from nanometer 256Mbit dynamic random access memory DRAM devices. The TEM employed is a JEOL 2010F with a field emission gun (FEG) and running at 200KV acceleration voltage. Correlations among transmission electron microscopy (TEM), scanning transmission electron microscopy (STEM), electron energy loss spectroscopy (EELS) elemental mapping, and x-ray energy dispersive spectroscopy (XEDS) elemental linescan were established. The results here not only provide important feedbacks to semiconductor product integration and optimization, but also demonstrate the full-functionality of the start-of-the-art analytical TEM in investigations of nanometer semiconductor devices.

Challenges and Benefits of Product-Like SRAM in Technology Development

2011 ◽  
Author(s):  
Felix Beaudoin ◽  
Stephen Lucarini ◽  
Fred Towler ◽  
Stephen Wu ◽  
Zhigang Song ◽  
...  
Keyword(s):  
Technology Development ◽  
Random Access ◽  
Random Access Memory ◽  
Static Random Access Memory ◽  
Development Phase ◽  
High Complexity ◽  
Access Memory ◽  
Integration Schemes ◽  
Front End

Abstract For SRAMs with high logic complexity, hard defects, design debug, and soft defects have to be tackled all at once early on in the technology development while innovative integration schemes in front-end of the line are being validated. This paper presents a case study of a high-complexity static random access memory (SRAM) used during a 32nm technology development phase. The case study addresses several novel and unrelated fail mechanisms on a product-like SRAM. Corrective actions were put in place for several process levels in the back-end of the line, the middle of the line, and the front-end of the line. These process changes were successfully verified by demonstrating a significant reduction of the Vmax and Vmin nest array block fallout, thus allowing the broader development team to continue improving random defectivity.

AS8‐static random access memory (SRAM): asymmetric SRAM architecture for soft error hardening enhancement

2017 ◽  
Vol 11 (1) ◽  
pp. 89-94 ◽  
Author(s):  
Ihsen Alouani ◽  
Wael M. Elsharkasy ◽  
Ahmed M. Eltawil ◽  
Fadi J. Kurdahi ◽  
Smail Niar
Keyword(s):  
Random Access ◽  
Random Access Memory ◽  
Soft Error ◽  
Static Random Access Memory ◽  
Access Memory
Sign in / Sign up

Export Citation Format

Share Document