2D CFD-Analysis of Micro-Patterned Surfaces in Hydrodynamic Lubrication

2004 ◽  
Author(s):  
Fredrik Sahlin ◽  
Sergei B. Glavatskih ◽  
Torbjo¨rn Almqvist ◽  
Roland Larsson
Keyword(s):  
Carrying Capacity ◽  
Numerical Study ◽  
Hydrodynamic Lubrication ◽  
Tangential Velocity ◽  
Pressure Rise ◽  
Hydrodynamic Performance ◽  
Patterned Surfaces ◽  
Load Carrying Capacity ◽  
Fluid Inertia ◽  
Load Carrying

Results of a numerical study of the influence of micro-patterned surfaces in hydrodynamic lubrication of two parallel walls are reported. Two types of parameterized grooves with the same order of depth as the film thickness are used on one stationary wall. The other wall is smooth and is sliding with a specified tangential velocity. Isothermal incompressible two dimensional full film fluid flow mechanics is solved using a Computational Fluid Dynamics method. It is shown that, by introducing a micro-pattern on one of two parallel walls, a net pressure rise in the fluid domain is achieved. This produces a load carrying capacity on the walls which is mainly contributed by fluid inertia. The load carrying capacity increases with Reynolds number. The load carrying capacity is reported to increase with groove width and depth. However, at a certain depth a vortex appears in the groove and near this value the maximum load carrying capacity is achieved. It is shown that the friction force decreases with deeper and wider grooves. Among all geometries studied, optimum geometry shapes in terms of hydrodynamic performance are reported.

Two-Dimensional CFD-Analysis of Micro-Patterned Surfaces in Hydrodynamic Lubrication

2005 ◽  
Vol 127 (1) ◽  
pp. 96-102 ◽  
Author(s):  
Fredrik Sahlin ◽  
Sergei B. Glavatskih ◽  
Torbjo¨rn Almqvist ◽  
Roland Larsson
Keyword(s):  
Carrying Capacity ◽  
Numerical Study ◽  
Hydrodynamic Lubrication ◽  
Tangential Velocity ◽  
Pressure Rise ◽  
Hydrodynamic Performance ◽  
Patterned Surfaces ◽  
Load Carrying Capacity ◽  
Two Dimensional ◽  
Load Carrying

Results of a numerical study of the influence of micro-patterned surfaces in hydrodynamic lubrication of two parallel walls are reported. Two types of parameterized grooves with the same order of depth as the film thickness are used on one stationary wall. The other wall is smooth and is sliding with a specified tangential velocity. Isothermal incompressible two dimensional full film fluid flow mechanics is solved using a Computational Fluid Dynamics method. It is shown that, by introducing a micro-pattern on one of two parallel walls, a net pressure rise in the fluid domain is achieved. This produces a load carrying capacity on the walls which is mainly contributed by fluid inertia. The load carrying capacity increases with Reynolds number. The load carrying capacity is reported to increase with groove width and depth. However, at a certain depth a vortex appears in the groove and near this value the maximum load carrying capacity is achieved. It is shown that the friction force decreases with deeper and wider grooves. Among all geometries studied, optimum geometry shapes in terms of hydrodynamic performance are reported.

scholarly journals Two-scale homogenization of hydrodynamic lubrication in a mechanical seal with isotropic roughness based on the Elrod cavitation algorithm

2021 ◽  
pp. 135065012110176
Author(s):  
Yanxiang Han ◽  
Qingen Meng ◽  
Gregory de Boer
Keyword(s):  
Surface Topography ◽  
Carrying Capacity ◽  
Hydrodynamic Lubrication ◽  
Tribological Performance ◽  
Stribeck Curve ◽  
Polar Coordinate System ◽  
Load Carrying Capacity ◽  
Mechanical Seal ◽  
Macro Scale ◽  
Load Carrying

A two-scale homogenization method for modelling the hydrodynamic lubrication of mechanical seals with isotropic roughness was developed and presented the influence of surface topography coupled into the lubricating domain. A linearization approach was derived to link the effects of surface topography across disparate scales. Solutions were calculated in a polar coordinate system derived based on the Elrod cavitation algorithm and were determined using homogenization of periodic simulations describing the lubrication of a series of surface topographical features. Solutions obtained for the hydrodynamic lubrication regime showed that the two-scale homogenization approach agreed well with lubrication theory in the case without topography. Varying topography amplitude demonstrated that the presence of surface topography improved tribological performance for a mechanical seal in terms of increasing load-carrying capacity and reducing friction coefficient in the radial direction. A Stribeck curve analysis was conducted, which indicated that including surface topography led to an increase in load-carrying capacity and a reduction in friction. A study of macro-scale surface waviness showed that the micro-scale variations observed were smaller in magnitude but cannot be obtained without the two-scale method and cause significant changes in the tribological performance.

The effect of V-shape protruded and dimple textured on the load-carrying capacity and coefficient of friction of hydrodynamic journal bearing: A comparative numerical study

2020 ◽  
pp. 135065012093500
Author(s):  
Sanjay Sharma ◽  
Aniket Sharma ◽  
Gourav Jamwal ◽  
Rajeev Kumar Awasthi
Keyword(s):  
Coefficient Of Friction ◽  
Carrying Capacity ◽  
Performance Enhancement ◽  
Numerical Study ◽  
Geometrical Parameters ◽  
Load Carrying Capacity ◽  
Enhancement Ratio ◽  
Load Carrying ◽  
The Coefficient Of Friction ◽  
Computing Performance

The present comparative numerical study is between V-shape protruded, dimple textured, and untextured bearing. The performance parameters in terms of the load-carrying capacity and coefficient of friction are computed by solving governing Reynold’s equation of the lubricant fluid flow. The governing equation is solved by the finite element method by assuming that the fluid is Newtonian and isoviscous in nature. The effect of eccentricity ratios, texture distribution, texture heights, and texture depths are considered for the analysis in both textured bearings. From simulated results, the load-carrying capacity and coefficient of friction is found to be maximum for protruded textured bearing in full textured region and first half-textured region respectively as compared to untextured bearings. Finally, optimal operating and geometrical parameters of textured bearing is obtained by computing performance enhancement ratio, which is the ratio of the load-carrying capacity to the coefficient of friction. The maximum value of the performance enhancement ratio is found for protruded and dimple textured bearing in full texturing and second half-region corresponding to the eccentricity ratio of 0.8 and 0.6 respectively at texture height and depth of 0.4.

The Granular Lubricated Journal Bearing: Evidence of Lift Formation

2019 ◽  
Vol 141 (4) ◽  
Author(s):  
Venkata K. Jasti ◽  
Martin C. Marinack ◽  
Deepak Patil ◽  
C. Fred Higgs
Keyword(s):  
Carrying Capacity ◽  
Granular Flow ◽  
High Speed ◽  
Journal Bearing ◽  
Hydrodynamic Lubrication ◽  
Flow Behavior ◽  
Extreme Environments ◽  
Granular Flows ◽  
Load Carrying Capacity ◽  
Load Carrying

This work demonstrates that granular flows (i.e., macroscale, noncohesive spheres) entrained into an eccentrically converging gap can indeed actually exhibit lubrication behavior as prior models postulated. The physics of hydrodynamic lubrication is quite well understood and liquid lubricants perform well for conventional applications. Unfortunately, in certain cases such as high-speed and high-temperature environments, liquid lubricants break down making it impossible to establish a stable liquid film. Therefore, it has been previously proposed that granular media in sliding convergent interfaces can generate load carrying capacity, and thus, granular flow lubrication. It is a possible alternative lubrication mechanism that researchers have been exploring for extreme environments, or wheel-regolith traction, or for elucidating the spreadability of additive manufacturing materials. While the load carrying capacity of granular flows has been previously demonstrated, this work attempts to more directly uncover the hydrodynamic-like granular flow behavior in an experimental journal bearing configuration. An enlarged granular lubricated journal bearing (GLJB) setup has been developed and demonstrated. The setup was made transparent in order to visualize and video capture the granular collision activity at high resolution. In addition, a computational image processing program has been developed to process the resulting images and to noninvasively track the “lift” generated by granular flow during the journal bearing operation. The results of the lift caused by granular flow as a function of journal rotation rate are presented as well.

Fluid Inertia Effects in a Non-Newtonian Squeeze Film Between Two Plane Annuli

1999 ◽  
Vol 122 (4) ◽  
pp. 872-875 ◽  
Author(s):  
R. Usha and ◽  
P. Vimala
Keyword(s):  
Carrying Capacity ◽  
Integral Method ◽  
Squeeze Flow ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
Fluid Inertia ◽  
Inertia Effects ◽  
Load Carrying ◽  
Analytical Expressions ◽  
Plastic Fluids

An analysis is presented for the laminar squeeze flow of an incompressible powerlaw fluid between parallel plane annuli using the modified lubrication theory and energy integral method. The local and the convective inertia of the flow are considered in the investigation. Analytical expressions for the load carrying capacity of the squeeze film are obtained using both the methods and are compared with those based on the assumption of inertialess flow. It is observed that the inertia correction in the load carrying capacity is more significant for pseudo-plastic fluids, n<1.[S0742-4787(00)00504-X]

Hydrodynamic Lubrication of Finite Slider Bearings: Effect of One Dimensional Film Shape, and Their Computer Aided Optimum Designs

1983 ◽  
Vol 105 (1) ◽  
pp. 48-63 ◽  
Author(s):  
C. Bagci ◽  
A. P. Singh
Keyword(s):  
Numerical Solution ◽  
Carrying Capacity ◽  
Reynolds Equation ◽  
Hydrodynamic Lubrication ◽  
Load Carrying Capacity ◽  
Slider Bearing ◽  
Design Data ◽  
Slider Bearings ◽  
Load Carrying ◽  
Computer Aided

The effect of the film shape on the load carrying capacity of a hydrodynamically lubricated bearing has not been considered an important factor in the past. Flat-faced tapered bearing and the Raileigh’s step bearing of constant film thickness have been the primary forms of film shapes for slider bearing studies and design data developments. This article, by the computer aided numerical solution of the Reynolds equation for two dimensional incompressible lubricant flow, investigates hydrodynamically lubricated slider bearings having different film shapes and studies the effect of the film shape on the performance characteristics of finite bearings; and it shows that optimized bearing with film shapes having descending slope toward the trailing edge of the bearing has considerably higher load carrying capacity than the optimized flat-faced tapered bearing of the same properties. For example the truncated cycloidal film shape yields 26.3 percent higher load carrying capacity for Lz/Lx = 1 size ratio, and 44 percent higher for Lz/Lx = 1/2. The article then presents charts for the optimum designs of finite slider bearings having tapered, exponential, catenoidal, polynomial, and truncated-cycloidal film shapes, and illustrates their use in numerical bearing design examples. These charts also furnish information on flow rate, side leakage, temperature rise, coefficient of friction, and friction power loss in optimum bearings. Appended to the article are analytical solutions for infinitely wide bearings with optimum bearing characteristics. The computer aided numerical solution of the Reynolds equation in most general form is presented by which finite or infinitely wide hydrodynamically or hydrostatically lubricated bearings, externally pressurized or not, can be studied. A digital computer program is made available.

Stokes Roughness Effects on Hydrodynamic Lubrication. Part II—Effects Under Slip Flow Boundary Conditions

1986 ◽  
Vol 108 (2) ◽  
pp. 159-166 ◽  
Author(s):  
Y. Mitsuya
Keyword(s):  
Flow Regime ◽  
Carrying Capacity ◽  
Stokes Equations ◽  
Hydrodynamic Lubrication ◽  
Slip Flow ◽  
Load Carrying Capacity ◽  
Roughness Effects ◽  
Random Roughness ◽  
Load Carrying ◽  
Flow Effects

Stokes roughness effects on hydrodynamic lubrication are studied in the slip flow regime. Slip flow boundary conditions for Navier-Stokes equations are derived, assuming that the fluid on a surface slips due to the molecular mean free path along the surface, even if the surface is rough. The perturbation method for Navier-Stokes equations, which was derived in Part I of this report, is then applied. Slip flow effects on load carrying capacity and frictional force are numerically clarified for both Stokes and Reynolds roughnesses. In the slip flow regime, second-order quantities induced by Stokes effects, such as flow rate, load carrying capacity, and frictional force are in proportion to the wavenumber squared. This phenomenon relative to the quantities being proportional is also the same as that in the continuum flow regime. As a result of velocity slippage, the load carrying capacity in Stokes roughness is found to decrease more than in Reynolds roughness for incompressible films, while the relationship is reversed for compressible films having a high compressibility number. The simulation of random roughness, which is generated by numerical means, clarifies one important result: the average slip flow effects associated with random Stokes roughness become similar to the slip flow effects in deterministic sinusoidal Stokes roughness, whose wavelength and height are statistically equivalent to those of random roughness. Although attention should be given to the fact that Stokes effects on random roughness demonstrate considerable scattering with the continuum flow, such scattering diminishes with the slip flow.

Theoretical Investigation of Couple Stress Squeeze Films in a Curved Circular Geometry

2011 ◽  
Vol 133 (4) ◽  
Author(s):  
Vimala Manivasakan ◽  
Govindarajan Sumathi
Keyword(s):  
Theoretical Investigation ◽  
Carrying Capacity ◽  
Couple Stress ◽  
Squeeze Flow ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
Fluid Inertia ◽  
Load Carrying ◽  
Inertia Forces ◽  
Good Agreement

A theoretical investigation of the laminar squeeze flow of a couple-stress fluid between a flat circular static disk and an axisymmetric curved circular moving disk has been carried out using modified lubrication theory and microcontinuum theory. The combined effects of fluid inertia forces, curvature of the disk and non-Newtonian couple stresses on the squeeze film behavior are investigated analytically. Each of these effects and their combinations show a significant enhancement in the squeeze film behavior, and these are studied through their effects on the squeeze film pressure and the load carrying capacity of the fluid film as a function of time. Two different forms of the gapwidth between the disks have been considered, and the results have been shown to be in good agreement with the existing literature.

The Axial Load-Carrying Capacity of Radial Cylindrical Roller Bearings

1970 ◽  
Vol 92 (1) ◽  
pp. 129-134 ◽  
Author(s):  
H. Korrenn
Keyword(s):  
Carrying Capacity ◽  
Hydrodynamic Lubrication ◽  
Experimental Investigations ◽  
Load Carrying Capacity ◽  
Oil Viscosity ◽  
Application Range ◽  
Roller Bearings ◽  
Load Carrying ◽  
Thrust Load ◽  
Cylindrical Roller

Thrust load transmission at the contact areas of roller ends and flanges occurs under conditions of pure sliding. Recent theoretical and experimental investigations showed that with adequately designed roller ends and flanges and with a satisfactory lubricant high thrust loads can be accommodated over a wide speed range with fully hydrodynamic lubrication. The conventional methods used for the determination of the safe thrust load should be revised and supplemented. Oil viscosity should be introduced as an important parameter. Contrary to present opinion the hydrodynamic load-carrying capacity at the flange increases with increasing speed. This new knowledge broadens the application range of radial cylindrical roller bearings.

Sign in / Sign up

Export Citation Format

Share Document