Collagen Fiber Angle Quantification of Carotid Arteries From Fibulin-5 Null Mice

Author(s):  
William Wan ◽  
Rudolph L. Gleason

Recent studies have revealed that carotid arteries from fibulin-5 (fbln5) null mice exhibit altered biomechanical and microstructural properties [1–2]. While the previous studies outline quantitative differences in mechanical properties of arteries from fbln5 null and wildtype mice, physical microstructural differences have yet to be quantified. Measurement of microstructural parameters will provide a crucial link between previously quantified mechanical properties and biological effects of knocking out the fbln5 gene. Characterizing microstructural properties will also provide experimental data to validate structurally-motivated constitutive relations and growth and remodeling models [3–4]. In this study, we quantified collagen fiber orientation in carotid arteries from fbln5 null and wildtype mice; collagen in mouse carotid arteries were imaged using multiphoton microscopy and analyzed using a fast Fourier transform algorithm.

Author(s):  
William Wan ◽  
Hiromi Yanagisawa ◽  
Rudolph L. Gleason

Fibulin-5 is an extracellular matrix (ECM) protein that interacts with integrins and plays a critical role in organizing elastic fibers. Gross observation and histological examination reveal that carotid arteries from fibulin-5 knockout (fib5-/-) mice have disrupted elastic lamellae and are more tortuous [1]. The properties of fibulin-5 null mice provide a unique platform for developing constituent based models for vascular mechanics. While numerous models for blood vessels exist, there is a need to relate measurable microstructural metrics of structurally-based constitutive relations. We performed mechanical tests on carotid arteries from wildtype (WT) and fib5-/-mice and imaged live vessels under multiple loading scenarios to quantify microstructure during deformation. We also fit experimental results to a constitutive relation based on Holzapfel’s model [2]. These results provide a basis for further model development.


2004 ◽  
Vol 126 (2) ◽  
pp. 244-251 ◽  
Author(s):  
Ling Chen ◽  
Frank C-P. Yin, M.D., Ph.D. ◽  
Karen May-Newman, Ph.D.

Biaxial testing, histological measurements and theoretical continuum mechanics modeling were employed to investigate the structure and mechanical properties of the mitral valve leaflet-strut chordae transition zone (LCT). The results showed that geometry changes and collagen fiber angle distribution contribute to variations in mechanical properties in the LCT zone. A simple three-coefficient exponential constitutive law was able to simulate the variation in stress-stretch behavior in the LCT zone by spatially varying a single coefficient and incorporating collagen fiber angle and degree of alignment. This quantitative information can greatly improve the predictions from biomechanical valve models by incorporating regional variations of structure and properties in the mitral leaflet-chordae tendineae system. These data provide the foundation for a computational model for studying stress distributions before and following chordal rupture, which may indicate the underlying reasons for the development of valve insufficiency in patients.


2020 ◽  
Vol 8 (7_suppl6) ◽  
pp. 2325967120S0044
Author(s):  
Ryan Castile ◽  
Spencer Lake ◽  
Robert Brophy ◽  
Ronak Patel

Objectives: The anterolateral ligament (ALL) of the knee has recently emerged as a potential contributor to rotational stability of the knee, with growing interest in ALL reconstruction as a supplement to anterior cruciate ligament reconstruction. The prevalence of the ALL in the knee has varied in anatomic dissection and imaging studies, raising questions about its importance as a knee stabilizer. The purpose of this study was to assess the microstructural and mechanical properties of the anterolateral knee, to better understand the ALL structure compared to the surrounding anterolateral capsule (ALC) and lateral collateral ligament (LCL). A polarized light imaging technique was used to quantify collagen fiber alignment simultaneously with measurement of tensile mechanical properties. Our primary hypothesis was that there is no difference in the microstructural and mechanical properties between the ALL and ALC. Our secondary hypothesis was that the properties of the LCL are different from the ALL and ALC. Methods: Twenty-five knee specimens from sixteen donors (five males, eleven females; mean age 45.6 +/- 6.4; age range 35-59 years; mean BMI 26.5 +/- 8.4) were obtained as determined by a priori power analysis. The anatomic technique to dissect the anterolateral knee structures was performed as described previously. Three tissue samples (LCL, ALL, and ALC) were harvested (Fig. 1). The ALL was taken as a quadrilateral piece of tissue starting posterior/proximal from the lateral femoral epicondyle and ending at the lateral border of Gerdy’s tubercle. During gross dissection, the knee was assessed for the presence or absence of a distinct visible and palpable structure within the area defined as the ALL. Harvested samples were thinned to approximately 1-mm thick using a freezing-stage sliding microtome. Cross-sectional area was measured using a 3D laser scanning system. Four 0.8-mm diameter aluminum beads were attached to the sample surface to enable strain measurement. Mechanical testing was performed with preconditioning followed by both a stress-relaxation test and a quasi-static ramp to failure. Microstructural analysis was performed using transmitted circularly-polarized incident light and a high-resolution, division-of-focal-plane polarization camera. The average degree of linear polarization (AVG DoLP; i.e., mean strength of collagen alignment) and standard deviation of the angle of polarization (STD AoP; i.e., degree of variation in collagen angle orientation) were calculated for the region of interest of each sample. Statistical analysis was performed using Kruskal-Wallis test (assuming nonparametric data) with Dunn’s correction for multiple comparisons. Results: Mechanical analysis of elastic moduli for the toe- and linear-region of the stress-strain curves showed no difference between the ALL and ALC but were significantly higher for the LCL (p<0.0001; Fig. 2). Microstructural analysis of the ALL and ALC during quasi-static ramp to failure showed no difference in AVG DoLP and STD AoP values at all strain levels (Fig. 3). Larger DoLP values (i.e., stronger collagen fiber alignment) were observed for the LCL than both the ALL and ALC (p<0.0001). Larger STD AoP values (i.e., more variation in collagen orientation) were observed for the ALL and ALC compared to the LCL (p<0.0001; Fig. 3). When looking at correlations between mechanical and microstructural properties (Fig. 4), we found clustering of the LCL data points at high linear modulus and AVG DoLP while the ALL and ALC data points were clustered together. Similarly, we found clustering of the LCL at high linear modulus and low STD AoP while the ALL and ALC were clustered together. Only three of 25 knee specimens (12%) were observed to have a distinct, ligamentous structure in the region of the ALL. Interestingly, these distinct ALL samples (outlined in black on figures) showed relatively larger elastic moduli, higher AVG DoLP, and lower STD AoP (i.e., uniform and organized collagen alignment) across the stress-strain curve compared to samples harvested from knees without a distinct ALL. The distinct ALL tissues were also seen clustered near the LCL data points in the correlation plots. Conclusions: Overall, there were no differences in the mechanical and microstructural properties between the ALL and ALC, while the LCL demonstrated different properties compared to both the ALL and ALC. Both the ALC and ALL show significantly weaker collagen fiber alignment and more variation in the direction of collagen fiber alignment compared to the LCL. These findings suggest that the ALL has similar properties to capsule (i.e., ALC). However, when a distinct ALL was present at dissection (12%), the data indicates stronger and more uniform collagen alignment suggestive of more ligament-type qualities. Further research is needed to more precisely define the prevalence and properties of distinct ALLs in the knee.


Author(s):  
Aristotelis Agianniotis ◽  
Nikos Stergiopulos

The adventitia is the outermost layer of blood vessels and its mechanical properties are determined by the organization of collagen fibers in this layer. The waviness and the angular dispersion characterize the collagen fiber organization. Previous studies were mainly conducted on loaded and chemically fixed vessels, which could modify the structural organization [1]. We have combined fluorescent marker with confocal microscopy and image analysis to quantify the waviness and angular distribution of collagen fibers, and determine the correlation between the waviness distribution of fibers and their main orientation in the adventitia of rabbit common carotid arteries at their zero-stress state.


2020 ◽  
Vol 21 (5) ◽  
pp. 518
Author(s):  
Ahmed Maati ◽  
Laurent Tabourot ◽  
Pascale Balland ◽  
Salim Belaid

The purpose of this study is to highlight the role played by some important factors on sprinback phenomenon. This latter affects significantly the geometry of the manufactured product. Large automotive or plane body parts are specifically affected by this phenomenon which complicates the tools design. The study focuses here on specific materials with high trend to develop heterogeneous strains during forming processes. Due to its hexagonal crystalline structure, titanium has initial heterogeneous microstructure that grows stronger when plastic strain occurs. Heterogeneous microstructures induce the coexistence in the material of volumes with different mechanical properties even, in some case, with different mechanical behaviours. Therefore, accommodation between these volumes generates distributed internal stresses and important elastic energy storage. The macroscopic behaviour can be provided either by average phenomenological constitutive equation identical for all locations in the material or by integrating a set of local constitutive relations taking into account the variability of the behaviour as a function of the position in the material. In this context, experimental and numerical studies of a 3-point bending test on titanium alloy are considered.


2014 ◽  
Vol 625 ◽  
pp. 192-195
Author(s):  
Lillia Haddour ◽  
Mourad Keddam ◽  
Nadir Mesrati

Some low purity alumina ceramics with an alumina content ranging from 86% to 93% were investigated, in order to explore the effects of microstructural parameters (grain size, intergranular phase) on mechanical (wear) and dielectrical parameters. The microstructure and worn surfaces were analysed using scaning electron microscopy. The correlation between microstructural, dielectrical properties and wear is discussed. It has been proposed that mechanical and electrical properties are two aspects of the same fundamental mechanism. Key words: Al2O3, Microstructure final, Wear resistance, Breakdown.


2022 ◽  
Vol 327 ◽  
pp. 82-97
Author(s):  
He Qin ◽  
Guang Yu Yang ◽  
Shi Feng Luo ◽  
Tong Bai ◽  
Wan Qi Jie

Microstructures and mechanical properties of directionally solidified Mg-xGd (5.21, 7.96 and 9.58 wt.%) alloys were investigated at a wide range of growth rates (V = 10-200 μm/s) under the constant temperature gradient (G = 30 K/mm). The results showed that when the growth rate was 10 μm/s, different interface morphologies were observed in three tested alloys: cellular morphology for Mg-5.21Gd alloy, a mixed morphology of cellular structure and dendritic structure for Mg-7.96Gd alloy and dendrite morphology for Mg-9.58Gd alloy, respectively. Upon further increasing the growth rate, only dendrite morphology was exhibited in all experimental alloys. The microstructural parameters (λ1, λ2) decreased with increasing the growth rate for all the experimental alloy, and the measured λ1 and λ2 values were in good agreement with Trivedi model and Kattamis-Flemings model, respectively. Vickers hardness and the ultimate tensile strength increased with the increase of the growth rate and Gd content, while the elongation decreased gradually. Furthermore, the relationships between the hardness, ultimate tensile strength, the growth rate and the microstructural parameters were discussed and compared with the previous experimental results.


Crystals ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 1330
Author(s):  
Muhammad Farzik Ijaz ◽  
Mahmoud S. Soliman ◽  
Ahmed S. Alasmari ◽  
Adel T. Abbas ◽  
Faraz Hussain Hashmi

Unfolding the structure–property linkages between the mechanical performance and microstructural characteristics could be an attractive pathway to develop new single- and polycrystalline Al-based alloys to achieve ambitious high strength and fuel economy goals. A lot of polycrystalline as-cast Al-Cu-Mg-Ag alloy systems fabricated by conventional casting techniques have been reported to date. However, no one has reported a comparison of mechanical and microstructural properties that simultaneously incorporates the effects of both alloy chemistry and mechanical testing environments for the as-cast Al-Cu-Mg-Ag alloy systems. This preliminary prospective paper presents the examined experimental results of two alloys (denoted Alloy 1 and Alloy 2), with constant Cu content of ~3 wt.%, Cu/Mg ratios of 12.60 and 6.30, and a constant Ag of 0.65 wt.%, and correlates the synergistic comparison of mechanical properties at room and elevated temperatures. According to experimental results, the effect of the precipitation state and the mechanical properties showed strong dependence on the composition and testing environments for peak-aged, heat-treated specimens. In the room-temperature mechanical testing scenario, the higher Cu/Mg ratio alloy with Mg content of 0.23 wt.% (Alloy 1) possessed higher ultimate tensile strength when compared to the low Cu/Mg ratio with Mg content of 0.47 wt.% (Alloy 2). From phase constitution analysis, it is inferred that the increase in strength for Alloy 1 under room-temperature tensile testing is mainly ascribable to the small grain size and fine and uniform distribution of θ precipitates, which provided a barrier to slip by deaccelerating the dislocation movement in the room-temperature environment. Meanwhile, Alloy 2 showed significantly less degradation of mechanical strength under high-temperature tensile testing. Indeed, in most cases, low Cu/Mg ratios had a strong influence on the copious precipitation of thermally stable omega phase, which is known to be a major strengthening phase at elevated temperatures in the Al-Cu-Mg-Ag alloying system. Consequently, it is rationally suggested that in the high-temperature testing scenario, the improvement in mechanical and/or thermal stability in the case of the Alloy 2 specimen was mainly due to its compositional design.


Sign in / Sign up

Export Citation Format

Share Document